DVD Video Recorder User Manual

System Setup
English - 30
Channel Set
This feature allows you to manually set the DVD Recorder & VCR’
s tuner band to Antenna or Cable, whichever you connected to the
Antenna In jack during initial setup.
Use this setting only if Auto Setup detected the incorrect tuner band, i.e.
channels are coming in on the wrong channel numbers.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or
button.
3. Press the ▲▼ buttons to select Channel Set, then press ENTER or
button.
4. Press the ▲▼ buttons to select Antenna/Cable TV, then press the
ENTER or button.
Select the Antenna or Cable TV(Signal Source) that matches the
antenna connection you selected on pages 15~17.
Antenna : Select this if the DVD Recorder & VCR is connected to an
indoor or outdoor VHF/UHF antenna. (See pages 15, 17)
Cable TV : Select this if the DVD Recorder & VCR is connected to a
cable TV. (See page 16)
Auto Channel Memory
Auto Channel Memory will automatically seek and store all active
channels in your area.
1. With the unit in Stop mode/No Disc mode, press the MENU button.
2. Press the ▲▼ buttons to select Setup, then press the ENTER or
button.
3. Press the ▲▼ buttons to select Channel Set, then press the ENTER
or button.
4. Press the ▲▼ buttons to select Auto Channel Memory, then press
the ENTER or button.
The DVD Recorder & VCR will automatically search for all available
channels in the selected tuner band. This procedure may take a few
minutes to complete.
When nished, the lowest channel will be displayed.
If you want to stop or cancel scanning, press the ENTER button.
Then select ‘YES’.
Total channel numbers : 06/125
Saved channel :
Auto Channel Memory
Stop
4%
Channel Set
DVD-Recorder
No Disc
Timer Rec.
Setup
MOVE
ENTER RETURN EXIT
Antenna/Cable TV : Antenna
Auto Channel Memory
Channel Add/Delete
RF Output Channel : CH3
Antenna
Cable TV
01343A-VR355-XAC-ENG.indb 3001343A-VR355-XAC-ENG.indb 30 2007-03-23 오후 6:50:422007-03-23 오후 6:50:42