دليل المستخدم

Connecting & Setting Up
English - 16
Connecting DVD Recorder & VCR
to the TV using the RF Cable
Make sure that both the television and the
DVD Recorder & VCR are switched off before
connecting the cables.
■
1. Remove the aerial or network input cable from the
television.
2. Connect this cable to the 75Ω aerial jack marked
on the rear of your DVD Recorder & VCR.
3. Plug the RF Cable supplied into the jack on your
DVD Recorder & VCR.
4. Plug the other end of the RF Cable into the connector
previously used for the aerial on the television.
Connecting & Setting Up
To RF IN
To RF OUT
RF Cable
To ANT INPUT
TV
ANT
You can connect your DVD Recorder & VCR to
the television using the Audio/Video cable if the
appropriate input is available on the television. You
thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD Recorder
& VCR
1. Connect the RF Cable.
2. Connect one end of the Audio/Video cable to the Video
output and Audio L, R output jack on the rear of the
DVD Recorder & VCR.
3. Plug the other end into the appropriate connector on
the television.
Connecting DVD Recorder & VCR to
the TV using the Audio/Video Cable
Regardless of the type of connection chosen,
you must always connect the RF Cable supplied.
Otherwise, no picture will be visible on the screen
when the DVD Recorder & VCR is switched off.
Make sure that both the television and the
DVD Recorder & VCR are switched off before
connecting the cables.
■
■
ANT IN
RF cable
Aerial
Aerial cable
01375B-VR350,355-UMG,XSG-ENG.ind16 1601375B-VR350,355-UMG,XSG-ENG.ind16 16 2007-04-02 오후 4:57:442007-04-02 오후 4:57:44