Instruction Manual DVD-VR350 DVD-VR355 AK68-01293C English Français 01293C-VR350,355-XEB-ENG.
Getting Started Getting Started Warning TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. Do not install this equipment in a confined space such as a bookcase or similar unit.
▌ Important Safety Instructions ▌ Maintenance of Cabinet Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. For safety reasons, be sure to disconnect the AC power cord from the AC outlet. • Do not use benzene, thinner, or other solvents for cleaning. • Wipe the cabinet with a soft cloth. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings.
Getting Started ▌ Disc Specifications ● DVD-VR350 This unit allows you to record and playback high quality digital images on a DVD-RAM/DVD-RW/DVD-R disc. You can record and edit digital video on DVD-RAM/ DVD-RW/DVD-R discs as if they were VCR tapes. (DVD+RW/DVD+R discs can be played, but cannot be recorded.) ● DVD-VR355 This unit allows you to record and playback high quality digital video on DVD-RAM/DVD±RW/DVD±R discs.
DVD+RW Disc Playback and Recording • With DVD+RW discs, there is no difference between DVD-Video format(Video mode) and DVD-Video Recording format (VR mode). • You can make your own chapters on DVD+RWs and edit them using the Chapter Edit menu. • Finalising is generally unnecessary when using a DVD+RW disc. DVD-RAM Disc Playback and Recording • For cartridge type DVD-RAM discs, remove the cartridge and use the disc only. • Ensure that the recording mode is set to VR mode.
Getting Started Contents Getting Started ■ Plug & Auto Setup .................................................. 22 ■ Setting the Date and Time ...................................... 23 ■ Warning .................................................................. 2 ■ Auto Setup.............................................................. 24 ■ Precaution .............................................................. 3 Important Safety Instructions.................................. 3 Handling Cautions ...
■ Playing back a VHS Tape (VCR) ............................ 49 Tracking .................................................................. 49 Special VCR Playback Features ............................ 49 Variable Search System ......................................... 50 Recording DVD Recording ■ Recordable discs .................................................... 51 Compatibility between Samsung and Other Company’s Recorder.............................................. 51 Recording Formats ...........
Getting Started A variety of functions with easy-to-use user interface General Features ● DVD-VR350 This unit allows you to record and playback high quality digital images on a DVD-RAM/DVD-RW/DVD-R disc. You can record and edit digital video on DVD-RAM/ DVD-RW/DVD-R discs as if they were VCR tapes. (DVD+RW/DVD+R discs can be played, but cannot be recorded.) ● DVD-VR355 This unit allows you to record and playback high quality digital video on DVD-RAM/DVD±RW/DVD±R discs.
Make sure to check the following terms before reading the user’s manual. ▌ Step 1 : Select the disc type Please check available disc type before recording. Icons that will be used in manual Icon Term DVD Definition This involves a function available DVD or DVD-RW(V)/DVD±R discs that have been recorded and finalised. RAM This involves a function available in DVD-RAM. -RW This involves a function available in DVD-RW. -R This involves a function available in DVD-R.
Getting Started Unpacking ▌ Step 4 : Playing You can select the title you want to play in a displayed menu and then immediately start playback. A DVD consists of sections called titles, and sub sections called chapters. During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically when you finalise recording on DVD-RW/-R discs in V mode. You can make your own chapters on DVD+RWs and edit them using the Chapter Edit menu.
To determine whether your television is compatible, follow the instructions below. Getting Started 1. Switch your television on. 2. Point the remote control towards the television. 3. Press and hold the TV button and enter the two-figure code simultaneously corresponding to the brand of your television, by pressing the appropriate number buttons.
Getting Started Description ▌ Front Panel (DVD-VR350) 1 5 1. 2. 3. 4. 5. 6. 7. 8. 6 7 2 8 9 3 10 DVD DECK DVD OPEN/CLOSE BUTTON VCR DECK VCR EJECT BUTTON STANDBY/ON BUTTON VIDEO INPUT JACK (AV3 IN) AUDIO INPUT JACK (AV3 IN) DV INPUT JACK 9. 10. 11. 12. 13. 14. 15. 16. 11 4 12 13 14 15 16 P.SCAN BUTTON FRONT PANEL DISPLAY DVD/VCR SELECT BUTTON COPY BUTTONS PROG / BUTTONS RECORD BUTTON STOP BUTTON PLAY/PAUSE BUTTON ▌ Front Panel (DVD-VR355) 1 5 1. 2. 3. 4. 5. 6. 7. 8.
1 2 7 1. 2. 3. 4. 5. 6. 7. DVD is activated. DVD-RAM is activated. DVD(±)R or DVD(±)RW is activated. Progressive Scan mode is activated. Record function is activated. VCR is activated. DVD or CD media is loaded. 3 4 5 Getting Started ▌ Front Panel Display 6 8 9 8. 10 The time, counter position or current deck status is indicated. When you set a Timer recording, this indicator is illuminated. VHS Video tape is loaded. 9. 10. ▌ Rear Panel (DVD-VR350) 1 1. 2. 3. 4.
Getting Started ▌ Rear Panel (DVD-VR355) 10 1. 2. 3. 4. 5. S-VIDEO OUT JACK AUDIO L, R OUT JACKS DIGITAL AUDIO OUT JACK (OPTICAL/COAXIAL) AUDIO/VIDEO JACK (AV OUT) AV1 (TV) IN/OUT SCART 6. 7. 8. 9. 10. 1 2 3 4 5 6 7 8 9 AV2 (EXT) SCART COMPONENT VIDEO OUT JACKS OUT TO TV CONNECTOR AERIAL IN CONNECTOR HDMI OUTPUT (DVD-VR355 only) English - 14 01293C-VR350,355-XEB-ENG.
Your DVD Recorder & VCR remote control will work with Samsung televisions and compatible brands. 14. ANYKEY Button Press this to view the status of the disc that is being played. 15. REC Button Press this to make a recording on DVD-RAM/ DVD±RW/±R discs and VHS Video tape. Getting Started ▌ Tour of the Remote Control 16. TO DVD copy Button Press this when you copy from the VCR to the DVD. 17. REC SPEED Button Press this to set the desired recording time and picture quality. 18.
Connecting & Setting Up Connecting & Setting Up Connecting DVD Recorder & VCR to the TV using the RF Cable ■ Make sure that both the television and the DVD Recorder & VCR are switched off before connecting the cables. ▌ Case 1 : Connecting DVD Recorder & VCR to the TV using the SCART Cable You can connect your DVD Recorder & VCR to the television using the SCART cable if the appropriate input is available on the television. You thus: 1. Remove the aerial or network input cable from the television.
▌ Case 2 : Connecting DVD Recorder & VCR to a Satellite Receiver or Other Equipment You can connect your DVD Recorder & VCR to the television using the audio/video cable if the appropriate input is available on the television. 1. Connect one end of the video cable into the VIDEO output jack on the rear of the DVD Recorder & VCR. 1. AV2 IN (EXT): By means of 21-pin Scart Cable Plug the SCART Cable with satellite receiver or other equipment into the AV2 (EXT) jack on the rear of the DVD Recorder & VCR.
Connecting the S-Video Cable Connecting & Setting Up You will enjoy high quality images. S-Video seperates the picture element into black and white(Y) and colour(C) signals to present clearer images than composite video output mode. 1. Connect one end of the S-Video cable into the S-VIDEO output jack on the rear of the DVD Recorder & VCR. 2. Plug the other end of the S-Video cable into the appropriate input connector on the television. 3.
▌ Progressive Scan Connecting HDMI/DVI to a TV (DVD-VR355 only) Your TV must support progressive scan input to allow to watch progressive scan component video out. (See page 29) If your TV has a HDMI/DVI input, connect the HDMI/ DVI cable to the TV. You will enjoy the best quality images and sounds. • For more information about Progressive setting, refer to the page 29. • Make sure that the colour coded connections match.
Connecting & Setting Up AV Receiver Connections DVI adapter cable (not supplied) red To take full advantage of the movie theatre experience that DVD offers, you may want to connect your DVD Recorder & VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers. If your A/V receiver is equipped with a Dolby Digital Decoder, you have the option to bypass the DVD Recorder & VCR’s built-in Dolby Digital Decoder. Use the Digital Audio Out connection below.
Connecting External Devices ▌ Case 2 : Connecting a DV Device to the DV IN jack ▌ Case1 : Connecting an external devices to the AV3 jacks If your DV Device has a DV output jack, connect it to the DV input jack of your DVD Recorder & VCR. • If your camcorder has a DV output jack, see page 54 for more information. Connecting & Setting Up You can connect other audio/video equipment to your DVD Recorder & VCR using audio/video cables if the appropriate outputs are available on the equipment chosen. 1.
System Setup On-Screen Menu Navigation DVD-Recorder Setup No Disc Programme System Setup ► Clock Set ► Language ► Audio ► Video ► Parental Control ► Install ► MOVE OK RETURN EXIT The on-screen menus allow you to enable or disable various functions on your DVD Recorder & VCR. Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on screen menus. 1.
Setting the Date and Time DVD-Recorder Clock Set No Disc Programme Setup Date Time JAN 01 2007 12 Auto Clock 00 On MON MOVE OK RETURN EXIT Your DVD Recorder & VCR contains a 24-hour clock and calendar used to: • Automatically stop a programme recording • Preset your DVD Recorder & VCR to record a programme automatically • You must set the date and time when you purchase the DVD Recorder & VCR. • Do not forget to reset the time when you change clocks from winter to summer time and vice versa.
Auto Setup DVD-Recorder No Disc A B Setup Country Selection Autom. Setup PL I TV-System CZ CH :K DK N HF-Ausgang FIN P GR D E HU MOVE √ Man.NL Sendereinst.S√ OK TR: CH 36 Others RETURN EXIT Auto Channel Memory 50% √ √ You do not need to preset the stations if you have already set them automatically (See Plug & Auto Setup on page 22). Your DVD Recorder & VCR contains a built-in tuner used to receive television broadcasts. You must preset the stations received through the tuner.
Manual Setup If you have already set the stations automatically, you do not need to preset them manually. Manual Setup PR 01 CH ◄ ► Name Decoder MFT System Off L/L’ Done MOVE OK 1. With the unit in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select Install, then press the OK or ► button. 4. Press the ▲▼ buttons to select Manual Setup, then press the OK or ► button. 5.
Setting Up the Language Options DVD-Recorder Language No Disc Programme Audio Setup Subtitle Disc Menu On-Screen Menu DivX Subtitle Original English Français Deutsch Español : Italiano Western Nederlands Korean MOVE OK RETURN ▲ If you set audio, subtitle, disc menu, on-screen menu and DivX subtitle language in advance, they will come up automatically every time you watch a movie. 1. With the unit in Stop mode/No Disc mode, press the MENU button. 2.
Setting Up the Audio Options Allows you to setup the audio device and sound status settings depending on the audio system in use. You can also adjust the NICAM mode. 1. With the unit in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select Audio, then press the OK or ► button. Audio setup menu will be displayed. 4. Press the ▲▼ buttons to select the desired audio option, then press the OK or ► button. 5.
Setting Up the Display (Video) Options This function allows you to setup the TV screen settings. 1. With the unit in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select Video, then press the OK or ► button. Video option menu will be displayed. 4. Press the ▲▼ buttons to select the desired video option, then press the OK or ► button. 5.
Available video output jacks are as follow. Available Video Output Jack Setting mode Output jack Component mode RGB Mode P.SCAN off mode (Interlace mode) P.SCAN on mode Component Output (Y, PB, PR) O O (TV in progressive mode) X R, G, B Composite Composite Video out S-Video out X O O O X O O O O X O O AV1 Scart Progressive scan Setting up the Progressive scan 1. In Stop mode, press the P.SCAN button on the front of the DVD Recorder & VCR.
Output selection (DVD-VR355 only) • Connect the DVD Recorder & VCR to your TV via HDMI or DVI. Set your TV's input to HDMI or DVI. • Press the P.SCAN button while the unit is in Stop mode to select the output resolution. - If your TV is connected the HDMI or DVI cable, the output resolution mode changes in the following sequence each time you press the P.
Setting Up the Parental Control DVD-Recorder Parental Control No Disc Programme Password :Off Off √ On Setup MOVE OK RETURN EXIT The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. 1. With the unit in Stop mode/No Disc mode, press the MENU button on the remote control. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3.
VCR Setting This function allows you to setup the VCR setting. 1. With the unit in Stop mode/No Disc mode, press the MENU button. 2. Press the ▲▼ buttons to select Setup, then press the OK or ► button. 3. Press the ▲▼ buttons to select System, then press the OK or ► button. 4. Press the ▲▼ buttons to select VCR, then press the OK or ► button. 5. Press the ▲▼ buttons to select the desired VCR option, then press the OK or ► button. 6.
▌ Colour System DVD-Recorder System No Disc Programme Tape Length Setup : E180 ► Auto Play : On ► Auto Repeat : Off Automatic : On PAL : Automatic SECAM ► IPC Colour System √ √ MESECAM OK • Automatic : When playing back a tape, the system standard is automatically selected by the DVD Recorder & VCR. • PAL : PAL video system B/W MOVE Before recording or playing back a tape, you can select the required system standard. RETURN EXIT • SECAM • MESECAM • B/W : Black and White.
9. Press the STOP button to stop recording. 10. To display the created titles, finalise the disc (See page 77) and then press the TITLE MENU button. The title menu will be displayed. 1/1 JAN/01/2007 09:41 PR1 JAN/01/2007 09:45 PR1 JAN/01/2007 09:50 PR1 JAN/01/2007 12:00 PR1 JAN/01/2007 12:30 PR1 JAN/01/2007 12:40 PR1 Previous Top 11. To display the created chapters, select the desired Title and then press the DISC MENU button. The chapter menu for the selected Title will be displayed.
For using Anynet+(HDMI-CEC) 1. Connect DVD Recorder & VCR to the TV by using HDMI cable. (See pages 19~20) 2. Set the Anynet+(HDMI-CEC) to “On” on your DVD Recorder & VCR. (see above) 3. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.) • You can operate the DVD Recorder & VCR by using TV remote control.
Playback This section introduces basic functions of playback by disc type. Disc types that can be played Read the following information before playing a disc. Disc Types Region code (DVD-Video only) DVDVIDEO Both the DVD Recorder & VCR and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this DVD Recorder & VCR is described on the rear panel of the DVD Recorder & VCR.
▌ Discs that cannot be played ● DVD-Video with a region number other than “2” or “ALL” ● 3.9 GB DVD-R Disc for Authoring. ● A DVD±R/DVD-RW(V) disc which has been recorded and not finalised in a different manufacturer’s recorder. ● DVD-ROM/PD/MV-Disc, etc ● CVD/CD-ROM/CDV/CD-G/CD-I ■ This DVD Recorder & VCR can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.
Using the Disc Menu and Title Menu Some discs contain a dedicated menu system that allows you to select special functions for title, chapters, audio track, subtitles, film previews, information on characters, etc. ▌ For DVD-VIDEO disc Disc Menu : Press the DISC MENU button to enter the disc menu of the disc. • Move to the setup menu related to playback operation. • You can select audio language and subtitle etc. provided by the disc.
■ No sound is heard during Scan (Search) mode, except CDs (CDDA). (You can hear the sound during forward search (Fast 1) in disc.) No sound is heard during scanning in all MPEG4 modes. Depending on the disc type, the sound quality may lower during Fast 1 mode. ▌ Skipping Chapters or Tracks During playback, press the l◄◄ or ►►l button on the remote control. • If you press the l◄◄ button If you press the l◄◄ button, it moves to the beginning of the chapter, track or marker (DVD-RAM/-RW(VR mode)).
▌ Step Motion Play During Still mode, press the F.ADV/SKIP button on the remote control. • Each time the button is pressed, a new frame will appear. To return to normal speed playback, press the ►ll button. ■ No sound is heard during STEP or SLOW mode. Using the ANYKEY button The ANYKEY functions allows you to easily search for a desired scene by accessing title, chapter, track and time. You can also change the subtitle and audio settings and set some features including Repeat, Angle and Zoom.
Repeat Play ▌ Playing Repeatedly DVD-VIDEO Title 1/2 Chapter 1/28 Time 00:00:27 Subtitle ENG Audio ENG D 5.1CH Repeat Off 1. Press the ANYKEY button during playback. Angle 1/1 Zoom Off 2. Press the ▲▼ buttons to select Repeat. MOVE CHANGE 3. Select repeat mode using ◄► button, then press the OK button. ■ DVD-RAM/-RW(VR mode), unfinalised DVD-RW(V mode) and unfinalised DVD±R do not repeat a chapter. ■ To make the sub-menu disappear, press the ANYKEY or RETURN button again.
Selecting the Audio language DVD-VIDEO Title 1/2 Chapter 1/28 Time 00:01:03 Subtitle ENG Audio ENG D 5.1CH Repeat Off Angle 1/1 Zoom Off MOVE Audio languages may not work depending on the disc type. This is only available during playback. You can also operate this function by pressing the AUDIO button on the remote control. CHANGE 1. Press the ANYKEY button during playback. 2. Press the ▲▼ buttons to select Audio, then press the ◄► buttons to select the desired audio language.
Using the Bookmarks Bookmark 1 2 - - - - - - - -- (V mode) Set marks at scenes you want to see again so that you can start playback from the marked position. ▌ Setting Bookmarks MOVE PLAY CLEAR RETURN 1. Press the MARKER button during playback. 2. Press the OK button when the desired scene appears. • The number 1 is displayed and the scene is memorized. 3. Press the ◄► button to move to the next position. 4. Press the OK button again when the desired scene appears.
Using the Markers Marker 01 02 - - - - - - - -- N : 2 (VR mode) ▌ Setting Markers 1. Press the MARKER button during playback. MOVE PLAY CLEAR RETURN 2. Press the OK button when the desired scene appears. • The number 01 is displayed and the scene is memorized. 3. Press the ◄► button to move to the next position. 4. Press the OK button again when the desired scene appears. • The number 02 is displayed and the scene is memorized.
Playing back an Audio CD (CD-DA)/MP3 1 2 3 3 4 6 ▌ Buttons on the Remote Control used for Audio CD(CD-DA)/MP3 playback 1. l◄◄ button : Returns to the beginning of the current track when pressed during playback. If pressed again, your DVD recorder moves to and plays the previous track. If you press this button within three seconds after playback starts, the previous track will be played. If you press this button after three seconds, the current track will be replayed from the beginning. 5 7 8 7 2.
▌ Playing back an MP3 Disc MP3 Music List 1. Insert an MP3 Disc into the disc tray. 01/11 SONG01 No. SONG01 3.5MB 01/26/2007 002 003 004 005 006 PLAY MODE MOVE ► 0:00:06 MP3 2. Press the ▲▼ buttons to select the Disc Navigation, and then press the OK or ► button. Title ROOT SONG01 SONG02 SONG03 SONG04 SONG05 SONG06 3. Press the ▲▼ buttons to select the Music, and then press the OK or ► button. RETURN OK 4.
▌ Play Option Mode CD Music List 01/15 TRACK 1 No. II 0:00:01 TRACK 1 CDDA PLAY MODE Title Length 001 MODE TRACK 1 PLAY 002 TRACK 2 Repeat : Off 003 TRACK 3 Play Option : Normal 004 TRACK 4 005 TRACK 5 006 TRACK 6 007 TRACK 7 MOVE OK 0:03:50 0:04:00 0:03:49 0:03:47 0:04:29 0:03:44 0:03:44 RETURN EXIT 1. In the still mode, press the ANYKEY button. The Play option will be highlighted. 2. Press the ◄► buttons to select a desired Play option, then press the OK button.
5-1. If you press the ►ll button, the Slide Show Speed screen will appear. Press the ◄► buttons to set the slide show speed, then press the OK button. DVD-RW(VR) 5-2. Press the OK button with a picture selected in the Album screen and select a display mode (Album screen ( ), Slide show ( ), ) or Zoom ( )) using the ◄► buttons, then press Rotation ( the OK button. Slide Show Speed Slow Normal Fast JPEG01 MOVE PHOTO OK RETURN : Returns to the Album screen. : The unit enters slide show mode.
■ This unit can play the following video compression formats MPEG4 Codec format : DivX 3.11 DivX 4.x DivX 5.x DivX-Pro Xvid Motion Compensation : QPEL, GMC Audio format : “MP3”, “MPEG1 Audio Layer2”, “LPCM”, “AC3”, “DTS”, “MS ADPCM” ■ Some MPEG4 files created on a personal computer may not be play back. That is why Codec Type, Version and Higher resolution over specification is not supported. ■ Supported subtitle file formats: .smi, .srt, .sub, .psb, .txt, .
Skip In Play mode, press F.ADV/SKIP button to cue ahead exactly 30 seconds. Press F.ADV/SKIP button repeatedly up to 4 times to cue ahead 2 minutes. Slow motion In Still mode, press ►► button for slow motion. Press the ►► button repeatedly to play slow motion speed at 1/10, 1/7, 1/5 times. Press the PLAY button twice to resume normal viewing. ▌ Variable Search System Each time you record a cassette on this DVD Recorder & VCR, an index is automatically marked on the tape when recording is started.
Recording This section shows various DVD recording methods. This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. ■ Unfinalise - This allows additional recording on a DVD-RW disc originally recorded on the DVD Recorder & VCR Recordable discs This recorder can record on the following discs. - A DVD-RW disc that has been recorded by DAO (Disc At Once) in a PC cannot be unfinalised.
▌ Recording Formats DVD-RAM Unformatted Disc Do you want to format this disc? Yes No Since available functions differ depending on the disc type, select a disc that best fits your preferences. When you insert an unused disc, the following message appears. DVD-RAM : Use after formatting the disc. DVD±RW/+R : Use after initialising the disc. When using a DVD-RW disc, you can change the mode. Refer to Formatting a Disc on page 77.
Unrecordable video You cannot record copy protected movie. Pictures with copy protection cannot be recorded on this DVD Recorder & VCR. When the DVD Recorder & VCR receives a copy guard signal while recording, recording stops and the following message appears on the screen. Concerning Copy Control Signals TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy-Once and Copy-Never.
Recording immediately RAM VR XP PR 7 Available Time 00:28 DVD-VR355 only Before you start 1. Check the antenna cable is connected. 2. Press the OPEN/CLOSE button and place a recordeble disc on the disc tray. 3. Check the remaining time on the disc. DVD-RAM/DVD±RW/+R discs should be formatted or initialised in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording. 4. Press the OPEN/CLOSE button to close the disc tray.
■ You can not change the recording mode and the programme while recording. ■ Recording will stop automatically if there is no free space left for recording. ■ Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc. ■ If the power interrupted due to power failure or other reasons, the title being recorded will not be saved onto the disc. ■ Recording will stop automatically if a copy protected image is selected. ■ Do not use DVD-R authoring discs with this unit.
2. Press the REC button. 3. While in Record mode, press the REC button again to activate OneTouch Recording (OTR). • Record length 0:30 appears on the On-Screen Display and the DVD Recorder & VCR will record for exactly 30 minutes. 4. Continue pressing REC to add recording time in preset minute increments up to 9 hours. • The DVD Recorder & VCR stops recording automatically when the time has elapsed. ▌ To stop recording Press the STOP (■) button.
Recording Speed (DVD) AUTO : Select when you want to set video quality automatically. In AUTO Mode, the most suitable record mode is adjusted automatically, according to remaining time on the disc and length of the timer recording. This function selects one mode from XP, SP, LP and EP mode and is used in timer recording mode only. XP (high quality) : Select when audio and video qualities are important. (Approx. 1 hour) SP (standard quality) : Select to record in standard quality. (Approx.
Editing the Scheduled Record List DVD-Recorder Scheduled Record List DVD-RAM(VR) Current Time 12:00 DVD-VR355 only No. To Source Day Start End Speed V/P Edit No. 01 To Source Day Start DVD PR 01 Daily 12:00 14:00 Available Time 00:48 SP MOVE OK End Speed V/P Follow these directions to edit the timer record list. SP Off 1. With the unit in Stop mode, press the MENU button. RETURN EXIT 2. Press the ▲▼ buttons to select Programme, then press the OK or ► button. 3.
Using the ShowView Feature DVD-Recorder Programme DVD-RAM(VR) Title List ShowView ► Playlist Scheduled Record List ► Disc Manager ShowView Extended : Off ► Programme Setup Copy MOVE OK RETURN ShowView DVD-RAM(VR) Title List Enter ShowView Code number. [0-9] Disc Manager Programme Setup Copy NUMBER RETURN OK DVD-Recorder EXIT Scheduled Record List Current Time 12:00 DVD-RAM(VR) No. To Source Day Start End Speed V/P Edit No.
EZ REC MODE DVD-VR355 only This function allows you Initialise and Finalise a disc automatically. Press “On” to confirm EZ REC mode. Otherwise press “Off” On 1. With the unit in Stop mode/No Disc mode, press the EZ REC MODE button on the remote control. 2. Press the ◄ ► buttons to select On, and then press the OK button. The EZ REC MODE is set up. Off 3. Insert a disc. If the disc is new, it will initialise automatically. 4. Press the REC button. 5.
Basic VCR Recording Before starting 1. Check TV channel and Antenna connections. 2. Check the remaining time on the tape. You can record a TV show in progress by inserting a blank tape and pressing the z (REC) button. You can even add time in preset increments up to 9 hours by pressing the z (REC) button repeatedly. ■ Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small piece of tape.
Check Remaining Time RAM STOP 00:00:00 SP Rem 00:48 PR 1 JAN 01 2007 MON VCR STOP 00:00:00 SP Rem 01:21 PR 1 12 : 00 1. Press INFO button on the remote control. The following information will be displayed. (Current deck status, recording speed, remaining time, input channel, current time.) Special Recording Features While a recording is in progress, you can watch a different media, or add recording time in preset increments. 1.
Copy to DVD or VCR DVD-VR355 only You can copy from the DVD to VCR or VCR to DVD. Check the remaining time on the tape and disc. DVD-RAM(VR) Edit Copylist JAN/01/2007 ▌ To copy from DVD to VCR 1/1 No. Title Length Edit 01 JAN/01/2007 12:0 Play00:00:11 √ Rename (VR mode) Edit Scene JAN/01/2007 12:00 Copy 1 Scene Delete 1. With the unit in Stop mode, press the MENU button. JAN/01/2007 12:00 MOVE 2. Press the ▲▼ buttons to select Copy, then press the OK or ► button. OK RETURN EXIT 3.
▌ To copy from VCR to DVD VCR - -> DVD DVD-Recorder DVD-RAM(VR) No. 01 02 Start End Edit 00:02:20 Play 00:03:22 √ √ --:--:-- Copy --:--:-Delete STOP Copy All MOVE 1. With the unit in Stop mode, press the MENU button in stop mode. 2. Press the ▲▼ buttons to select Copy, then press the OK or ► button. 00:03:42 OK RETURN EXIT 3. Press the ▲▼ buttons to select VCR --> DVD, then press the OK or ► button. 4. You can use the ►II, I◄◄ or ►►I, ◄◄ or ►► buttons to search for the Start position.
Editing This section introduces basic functions of DVD editing and explains both edit functions for the recording on a disc and edit functions for the entire disc. Playing the Title List DVD-VR355 only Title List DVD-RAM(VR) JAN/01/2007 3/4 No. Title JAN/01/2007 Edit XP Protection MOVE c 1. Press the TITLE LIST button. The Title List screen is displayed.
▌ Recording on Free space DVD+RW Title List Free Space 5/7 No. Title Length Edit 01 APR/19/2007 12:00 00:00:21 ► 02 APR/19/2007 03 APR/20/2007 04 APR/20/2007 05 Free Space 06 APR/21/2007 07 Free Space Free Space PR 10 SP MOVE OK 12:30 00:00:03 ► 12:00 00:00:15 ► 12:30 00:00:16 ► 00:00:15 √ Recording 12:30 00:08:16 ► 03:40:27 ► RETURN This function is only available with DVD+RW discs. If existing titles are deleted, new free space will be created.
▌ Locking (Protecting) a Title DVD-RAM(VR) Title List 3/4 JAN/01/2007 Follow these instructions to lock a title to protect it from accidental deletion. Title Protection : JAN/01/2007 01:00 PR1 On JAN/01/2007 Off DVD-VR355 only XP MOVE OK RETURN EXIT Title List DVD-RAM(VR) JAN/01/2007 3/4 No.
▌ Deleting a Section of a Title DVD-RAM(VR) Edit Title List Follow these instructions to delete a section of a title from the Title List. Title List No. 03 Start End 00:00:02 00:00:00 Start (VR mode) 00:00:02 ► End Delete MOVE 1. Press the TITLE LIST button. The Title List screen is displayed. Return OK RETURN EXIT 2. Press the ▲▼ buttons to select a title you want to rename from the Title List, then press the OK or ► button. Edit Title List DVD-RAM(VR) 3.
Chapter Edit Screen Elements DVD+RW Chapter : 1/1 Show 00:00:00 ► Add 1. Current chapter number and status 2. Playback bar 3. Playtime 4. Chapter Edit menu Chapter Edit Delete MOVE Hidden OK Delete All Return RETURN c e f EXIT d DVD+RW Chapter Edit Adding a chapter Follow steps 1 to 3 in page 68 Chapter : 1/2 Show 00:10:10 ► Add Delete MOVE Hidden OK Delete All RETURN Return EXIT 4.
Deleting all chapters DVD+RW Chapter Edit Follow steps 1 to 3 in page 68 4. Press the ◄ ► buttons to select Delete All, and then press the OK button. 5. Press the ◄ ► buttons to select Yes, and then press the OK button. Do you want to delete all chapter marks? No Yes ► Add Delete MOVE Hidden OK Delete All RETURN DVD+RW 00:00:00 Return EXIT Divide Title Title List No. 03 Start End 00:00:00 ■ When deleting a chapter, only the chapter marker is actually deleted, not the recorded video.
Advanced Editing (Playlist) DVD-Recorder Make Scene ▌ Creating a Playlist DVD-RAM(VR) Follow these instructions to create a new playlist title from a recorded title. Scene No. 001 Start End Title List : 1/7 00:00:02 Start 00:00:00 00:00:02 ► End MOVE Make RETURN DVD-Recorder EXIT Make Scene DVD-RAM(VR) Scene No. 001 Start End Title List : 1/7 00:00:02 ІІ Start End MOVE Make OK RETURN DVD-RAM(VR) 00:00:08 00:00:08 EXIT Edit Playlist 1/1 No.
▌ Playing Titles in the Playlist DVD-RAM(VR) Edit Playlist JAN/01/2007 3/3 No. Title Follow these instructions to play the playlist titles. Length Edit 01 JAN/01/2007 12:00 00:00:03 ► 02 JAN/01/2007 12:30 00:00:25 ► Play 03 JAN/01/2007 12:0 00:00:05 √ Rename Edit Scene JAN/01/2007 12:00 1 Scene JAN/01/2007 12:00 Copy Delete MOVE OK RETURN EXIT (VR mode) 1. Press the PLAY LIST button with the disc stopped. The Edit Playlist screen is displayed. 2.
Playing a Selected Scene DVD-Recorder Edit Scene DVD-RAM(VR) Scene No. 2/7 Playlist No. 3 Play Modify 01 00:00:03 02 00:00:42 03 00:00:04 04 00:00:03 05 00:00:11 06 00:00:04 OK RETURN Move Add MOVE Delete EXIT DVD-Recorder Edit Scene DVD-RAM(VR) Scene No. 2/7 Playlist No. 3 Play Modify 01 00:00:03 02 00:00:42 03 00:00:04 04 00:00:03 05 00:00:11 06 00:00:04 OK RETURN Move Add MOVE DVD-Recorder Delete EXIT Modify Scene DVD-RAM(VR) Scene No.
Moving a Scene (Changing the Position of a Scene) DVD-Recorder Edit Scene DVD-RAM(VR) Scene No. 2/7 Playlist No. 3 Play Modify 01 00:00:03 02 00:00:42 03 00:00:04 Move Add 04 00:00:03 05 00:00:11 06 00:00:04 OK RETURN MOVE Delete EXIT Follow steps 1 to 3 on page 72. 4. Press the ▲▼◄ ► buttons to select the scene you want to move (change the position), then press the OK button. 5. Press the ▲▼ buttons to select Move, then press the OK button.
Deleting a Scene DVD-Recorder Edit Scene DVD-RAM(VR) Scene No. 2/8 Playlist No. 3 Play Modify 01 00:00:03 03 00:00:42 02 00:00:03 Move Follow steps 1 to 3 on page 72. 4. Press the ▲▼◄ ► buttons to select the scene you want to delete, and then press the OK button. 5. Press the ▲▼ buttons to select Delete, then press the OK button. Add 04 00:00:04 05 00:00:03 06 00:00:11 OK RETURN MOVE Delete EXIT DVD-Recorder Edit Scene DVD-RAM(VR) Scene No. 2/7 Playlist No.
Disc Manager DVD-Recorder ▌ Editing the Disc Name Rename DVD-RAM(VR) Follow these instructions to give a name to a disc. Disc DVD-VR355 only Save Back Space MOVE Space OK Delete Clear RETURN DVD-Recorder EXIT Disc Manager DVD-RAM(VR) Title List Disc Name : Disc ► Playlist Disc Protection : Not Protected ► Disc Manager Disc Format ► Delete All Title Lists ► Programme Setup Copy MOVE OK RETURN EXIT 1. With the unit in Stop mode, press the MENU button. 2.
▌ Formatting a Disc • DVD-RAM/+RW DVD-Recorder Disc Manager DVD-RAM(VR) Title List Disc Name : ► Playlist Disc Protection : Not Protected ► Disc Manager Disc Format : DVD-VR you want to format disc? DiscDoFinalise Use these instructions to format a disc. The Disc Protection should be cleared. ► ► DVD-VR355 only Programme Yes Setup No 1. With the unit in Stop mode, press the MENU button.
■ Once a disc is finalised, you cannot delete titles from the record list. ■ After being finalised, the DVD-RW(V mode)/±R operates in the same manner as a DVD-Video. ■ Depending on the disc type, the displayed screen may be different. ■ Finalising time may be different depending on the amount of data recorded on the disc. ■ Data on the disc will be damaged if the recorder is powered off during finalise process. ■ You can finalise the disc automatically using EZ REC MODE (see page 60).
▌ Delete All Title Lists DVD-Recorder Disc Manager DVD-RAM(VR) Title List Disc Name : ► Playlist Disc Protection : Not Protected ► Disc Manager Disc Format : DVD-VR Do you want to delete all title lists? Disc Finalise Programme Setup ► Delete All Title Lists Yes No OK 1. With the unit in Stop mode, press the MENU button. 2. Press the ▲▼ buttons to select Disc Manager, then press the OK or ► button. Copy MOVE DVD-VR355 only ► RETURN EXIT 3.
Reference Troubleshooting (DVD) If your product malfunctions, go through the check points below before contacting a Samsung authorized service centre. Problem No power. Explanation/Solution • Check whether the power cord is securely plugged into the power outlet. • Did you press the /I button of your DVD Recorder & VCR. The input is displayed The DVD Recorder & VCR requires some time to initialise after it is turned on.
Troubleshooting (DVD) Problem icon appears on the screen. Explanation/Solution You cannot use the operation or function due to one of the following reasons: (1) Your DVD disc does not support the feature (for example, angles) (2) You’ve requested a title, chapter, or scan time that is out of the correct range. Play mode settings are different from the The disc does not support all the selected functions.
Troubleshooting (VCR) Before contacting a Samsung authorized service centre, perform the following simple checks. Problem Explanation/Solution No power • Check that the power plug is connected to a wall outlet. • Have you pressed the /I button? You cannot insert a video cassette • A video cassette can only be inserted with the window side up and the safety tab facing you. The television programme was not recorded • Check the DVD Recorder & VCR antenna connections.
Specifications General Input Output VCR DVD Power requirements AC 220 - 240V, 50Hz Power consumption 30 Watts Weight 4.8 Kg Dimensions 430(W) x 321(D) x 79(H) Operating temp. +5°C to +35°C Other conditions Keep level when operating. Less than 75% operating humidity Video input (Rear) Euro Scart socket : 1.
UNITED KINGDOM This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Contact Samsung wereldwijd Wanneer u suggesties of vragen heeft met betrekking tot Samsung producten, gelieve contact op te nemen met de consumenten dienst van Samsung.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Manuel d’instructions DVD-VR350 DVD-VR355 English Français 01293C-VR350,355-XEB-FRA.
Mise en route Mise en route Avertissement AFIN DE RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE, NE TENTEZ PAS DE RETIRER LE COUVERCLE (OU LE PANNEAU ARRIÈRE). AUCUNE DES PIÈCES CONTENUES PAR CETAPPAREILNE PEUTÊTRE UTILE À L’UTILISATEUR. CONFIEZ LARÉPARATION DE VOTRE APPAREILÀ DU PERSONNELQUALIFIÉ. ATTENTION RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR Ce symbole indique la présence d’une “tension dangereuse” à l’intérieur du produit pouvant présenter un risque de choc électrique ou de blessure.
▌ Remarques importantes sur la sécurité Vous êtes prié de lire attentivement ces instructions avant d’ utiliser l’appareil. Respectez toutes les consignes de sécurité indiquées ci-dessous. Gardez ce manuel d’instructions à portée de la main pour vous y reporter si nécessaire. 1) Lisez attentivement toutes les instructions. 2) Conservez ces instructions pour usage ultérieur. 3) Appliquez toutes les consignes des avertissements et mises en garde. 4) Respectez toutes les instructions.
Mise en route ▌ Stockage du disque Rangez les disques dans un endroit adéquat car les données qui y sont enregistrées sont très sensibles aux conditions ambiantes. • N’exposez pas les disques à un ensoleillement direct. • Conservez-les dans un endroit frais et bien aéré. • Rangez-les verticalement. • Gardez-les dans un étui protecteur propre.
Lecture et enregistrement de disques DVD-RW • L’enregistrement et la lecture peuvent être réalisés sur des disques DVD-RW dans les modes V et VR. • Une fois qu’un DVD-RW enregistré en mode VR ou Vidéo a été finalisé, vous ne pouvez plus effectuer d’enregistrement supplémentaire. • Une fois qu’un DVD-RW enregistré en mode V est finalisé, il devient un DVD-Vidéo.
Mise en route Table des matières Mise en route Configuration du système ■ Avertissement......................................................... 2 ■ Navigation dans le Menu de l’écran ....................... 22 ■ Précautions ............................................................ 3 Remarques importantes sur la sécurité.................. 3 Précautions relatives à la manipulation .................. 3 Entretien du boîtier ................................................. 3 Manipulation du disque ....
Modifications ■ Lecture d’un disque MPEG4 .................................. 48 Lecture d’une cassette vidéo ■ Lecture d’une cassette VHS (magnétoscope) ........ 49 Alignement ............................................................. 49 Fonctionnalités de lecture spécifiques au magnétoscope ........................................................ 49 Système de recherche variable .............................. 50 Enregistrement Enregistrement de DVD ■ Disques inscriptibles.........................
Mise en route Balayage progressif de qualité supérieure Caractéristiques de base ● DVD-VR350 Cet appareil vous permet d'enregistrer et de lire des images numériques de haute qualité sur des DVDRAM/DVD-RW/DVD-R. Il vous offre également la possibilité d’enregistrer et de modifier des vidéos numériques sur DVD-RAM/DVD-RW/DVD-R comme s'il s'agissait de cassettes VHS. (les disques DVD+RW/ DVD+R peuvent être lus mais ne peuvent pas être enregistrés).
Familiarisez-vous avec les termes ci-dessous avant de lire le guide de l’utilisateur. ▌ Étape 1 : Sélectionnez le type de disque Icônes utilisées dans ce manuel Icône Terme Définition DVD Indique une fonction disponible sur les DVD ou DVD-RW(V)/ DVD±R enregistrés et finalisés. RAM Indique une fonction disponible sur les DVD-RAM. -RW Indique qu’une fonction est disponible sur DVD-RW. -R Indique qu’une fonction est disponible sur DVD-R. Indique une fonction disponible sur les DVD+RW.
Mise en route ▌ Étape 3 : Enregistrement Il existe deux méthodes d’enregistrement : l’enregistrement direct, et le Timer Recording (l’enre istrement par minuterie). Le Timer recording (l’enregistrement par minuterie) est organisé par date : Once (une fois), Daily (quotidien) ou Weekly (hebdomadaire); et par mode d’en- registrement : XP (quaité supérieure), SP (qualité standard), LP (enregistrementprolongé) et EP (mode longue durée).
Pour déterminer si votre téléviseur est compatible, suivez les instructions ci-dessous. Mise en route 1. Allumez votre téléviseur. 2. Pointez la télécommande en direction du téléviseur. 3. Appuyez longuement sur le bouton TV puis, à l’aide des touches numériques, saisissez le code à deux chiffres correspondant à la marque de votre téléviseur.
Mise en route Description ▌ Façade (DVD-VR350) 1 5 1. 2. 3. 4. 5. 6. 7. 6 7 2 8 3 9 10 Plateau de disques DVD OUVERTURE ETFERMETURE DU PLATEAU DE DISQUES DVD COMPARTIMENTÀ CASSETTE VIDÉO DU MAGNÉTOSCOPE TOUCHE D’ÉJECTION SUR LE MAGNÉTOSCOPE BOUTON STANDBY/ON PRISE D’ENTREE VIDEO (AV3 IN) PRISES D’ENTREE AUDIO (AV3 IN) 8. 9. 10. 11. 12. 13. 14. 15. 16. 11 4 12 13 14 15 16 PRISE D’ENTREE DV BOUTON P.
▌ Affichage en façade 2 3 7 1. 2. 3. 4. 5. 6. 7. 4 5 6 8 Le DVD est activé. Le DVD-RAM est activé. DVD(±)R ou DVD(±)RW est activé. Balayage progressif est activé. Fonction d’enregistrement est activée. Magnétoscope est activé. Un DVD ou un CD est chargé. Mise en route 1 9 8. 9. 10. 10 L’horloge, le chiffre du compteur ou l’état actuel du plateau de disques est affiché. Lorsque vous réglez un enregistrement programmé, le voyant est allumé. Une cassette vidéo est chargée dans le magnétoscope.
Mise en route ▌ Panneau arrière (DVD-VR355) 10 1. 2. 3. 4. 5. PRISE DE SORTIE S-VIDEO PRISES DE SORTIE AUDIO D/G PRISE DE SORTIE AUDIO NUMERIQUE (OPTIQUE/COAXIAL) PRISE AUDIO/VIDEO (SORTIE AV) PERITELENTREE/SORTIE AV1(TV) 6. 7. 8. 9. 10. 1 2 3 4 5 6 7 8 9 PERITELAV2 (EXT) PRISES DE SORTIE COMPOSANT VIDEO OUT VERS CONNECTEUR TV PRISE D’ANTENNE INTEGREE SORTIE HDMI (DVD-VR355 uniquement) Français - 14 01293C-VR350,355-XEB-FRA.
▌ Fonctions disponibles avec la télécommande 1. Touche DVD Pour commander l’enregistreur DVD. 2. Touche TV Pour commander le téléviseur. 3. Touche STANDBY/ON 4. Touche NUMBER 5. Touche IPC 6. Touche F.ADV/SKIP 7. Touches de lecture Avance / Retour, Recherche, Saut, Arrêt, Lecture / Pause, REC PAUSE (PAUSE ENR.) 8. Touches TV VOL (Volume) Pour régler le volume du téléviseur. 9. Touches MENU Permet d’afficher le menu de réglage de l’enregistreur DVD et du magnétoscope. 10.
Raccordement et configuration Connexion du câble PERITEL Branchements Connexion de l’enregistreur DVD/magnétoscope au téléviseur par un câble RF ■ Assurez-vous que le téléviseur et l’enregistreur DVD-magnétoscope sont tous deux éteints avant de procéder au branchement 1. Débranchez le câble d’entrée du réseau ou de l’antenne du téléviseur. Vous pouvez connecter votre enregistreur DVDmagnétoscope au téléviseur au moyen du câble PERITE Lsi l’entrée appropriée est disponible sur le téléviseur.
▌ Cas 2 : Connexion de l’enregistreur DVD/magnétoscope sur un récepteur satellite ou autre périphérique Vous pouvez connecter votre enregistreur DVD/ magnétoscope à un récepteur satellite ou à un autre enregistreur DVD/magnétoscope au moyen du câble PERITELsi les sorties appropriées sont disponibles sur le périphérique choisi. 2. AV1 (TV) : Au moyen d’un câble Péritel à 21 broches Connectez l’extrémité du câble PERITE Là laprise AV1 (TV) située à l’arrière de l’enregistreur DVDmagnétoscope.
Connexion du câble S-Vidéo Branchements Profitez d’images de haute qualité. Le procédé S-vidéo sépare les composantes de l’image en signaux noirs et blancs (Y) et couleur (C) afin d’offrir une plus grande netteté d’images que le mode de sortie vidéo composite. 1. Connectez une extrémité du câble S-vidéo à la prise de sortie S-VIDEO située à l’arrière de l’enregistreur DVD-magnétoscope. 2. Connectez l’autre extrémité du câble S-vidéo à la fiche d’entrée correspondante de votre téléviseur. 3.
▌ Balayage progressif Votre téléviseur doit prendre en charge la fonction d’entrée de balayage progressif pour permettre la visualisation de la sortie vidéo du composant de balayage progressif. (voir pages 28 à 29) Connexion du HDMI/DVI à un téléviseur (DVD-VR355 uniquement) Si votre téléviseur dispose d’une entrée HDMI/DVI, connectez-y le câble HDMI/DVI. Vous bénéficierez de la meilleure qualité en matière d’image et de son.
■ Qu’est-ce que le HDCP? Le HDCP (High-bandwidth Digital Content Protection - Protection du contenu numérique sur large bande passante) est un système visant à empêcher les données DVD émises par le biais de la technologie HDMI d’être copiées. Il offre un lien numérique sûr entre une source vidéo (ordinateur, DVD, etc.) et un écran (téléviseur, projecteur, etc.). Les données sont codées au niveau de la source afin d’empêcher les copies non autorisées.
Connexion des périphériques ▌ Cas 2 : Connexion d’un périphérique DV à la prise d’entrée DV ▌ Cas 1 : Connexion de périphériques aux prises AV3 • Si votre caméscope possède une prise de sortie DV, reportez-vous à la page 55 pour plus d’informations. Branchements Vous pouvez connecter un autre périphérique audio/ vidéo à votre enregistreur DVD-magnétoscope au moyen de câbles audio/vidéo si les sorties appropriées sont disponibles sur le périphérique choisi.
Configuration du système Navigation dans le Menu de l’écran DVD-Recorder Paramétrer Pas de disque Programme Système Paramétrer ► Paramétrer horloge ► Langue ► Audio ► Vidéo ► Contrôle parental ► Installation ► DÉPLA. OK REVENIR QUITTER Le Menu de l’écran permet d’activer et de désactiver certaines fonctions de l’enregistreur DVD avec mag-nétoscope. Appuyez sur le bouton MENU (MENU) pour ouvrir le menu à l’écran, puis utilisez les boutons suivants pour naviguer dans les menus à l’écran.
Réglage de la date et de l’heure DVD-Recorder Paramétrer horloge Pas de disque Programme Paramétrer Date Jan Temps Auto Horloge 01 2007 12 00 Oui LUN DÉPLA. OK REVENIR QUITTER Réglage automatique de l’horloge 1. Appuyez sur les boutons ◄ ► pour sélectionner Auto Horloge. Appuyez sur les boutons ▲▼ pour sélectionner Oui. 2. Appuyez sur le bouton OK, la date et l’heure sont alors sauvegardées. Si vous n’appuyez pas sur le bouton OK, elles ne seront pas sauvegardées. 3.
Installation automatique Vous n’avez pas besoin de pré-régler les chaînes si vous les avez déjà réglées automatiquement (voir page 22). Votre enregistreur DVD-magnétoscope a un tuner intégré pour recvoir les émissions de télévision. Vous devez pré-régler les chaînes reçues par le tuner. Vous pouvez le faire: E DÉPLA. OK REVENIR QUITTER • Par réglage automatique après branchement (voir page 22) • Automatiquement • Manuellement (voir page 25) 1.
Installation Manuelle Installation Manuelle PR 01 CH ◄ ► Nom Décodeur Non MFT Système L/L’ Effectué DÉPLA. OK Si vous avez déjà réglé les stations automatiquement, il n’est pas nécessaire de les prérégler manuellement. 1. Appuyez sur le bouton MENU, appareil en mode Arrêt/Pas de disque. 2. Appuyez sur les boutons ▲▼ pour sélectionner-Paramétrer, puis appuyez sur le bouton OK ou ►. 3. Appuyez sur les boutons ▲▼ pour sélectionner Installation, puis appuyez sur le bouton OK ou ►. 4.
Configuration des options de langue DVD-Recorder Langue Pas de disque Programme Audio : Original Original Paramétrer Sous-titre Menu du l’écran : English Automatique Français : English Deutsch : Español Français Sous-titre DivX : Italiano Western Menu du Disque ▲► OK Configuration du système DÉPLA.
Configuration des options audio Cette option vous permet de configurer le dispositif audio et les paramètres de son en fonction du système audio en cours d’utilisation. Vous pouvez également régler le mode NICAM. 1. Appuyez sur le bouton MENU, appareil en mode Arrêt/Pas de disque. 2. Appuyez sur les boutons ▲▼ pour sélectionner Paramétrer, puis appuyez sur le bouton OK ou ►. 3. Appuyez sur les boutons ▲▼ pour sélectionner Audio, puis appuyez sur le bouton OK ou ►. Le menu de réglage audio s’affiche. 4.
Configuration des options d’affichage (Vidéo) Cette fonction vous permet de configurer les paramètres de l’écran du téléviseur. 1. Appuyez sur le bouton MENU, appareil en mode Arrêt/Pas de disque. 2. Appuyez sur les boutons ▲▼ pour sélectionner Paramétrer, puis appuyez sur le bouton OK ou ►. 3. Appuyez sur les boutons ▲▼ pour sélectionner Vidéo, puis appuyez sur le bouton OK ou ►. Le menu des options Vidéo s’affiche. 4.
Les prises de sortie vidéo disponibles sont les suivantes. Prises de sortie vidéo disponibles Mode Réglage Prise de sortie Mode Composant Mode P.SCAN désactivé Mode P.SCAN (mode entrelacé) activé Mode RVB Sortie Composant (Y, PB, PR) O O (Téléviseur en mode progressif) X R, V, B Composite Sortie Vidéo composite Sortie S-Vidéo X O O O X O O O O X O O Péritel AV1 Si votre téléviseur prend en charge le balayage pro-gressif, appuyez sur le bouton P.
▌ Résolution HDMI/DVI (DVD-VR355 uniquement) DVD-Recorder Vidéo Pas de disque Programme Format écran Paramétrer Réduction bruit 3D : Non ► Sortie Vidéo ► Ce paramètre est utilisé lorsque l’appareil est connecté à un écran (téléviseur, projecteur, etc.) via HDMI ou DVI. : 16:9 Panoramique ► : Component Résolution HDMI/DVI 576P ► 720P ► Inscription DivX(R) • 576P : 720 x 576 • 720P : 1280 x 720 • 1080i : 1920 x 1080 1080i DÉPLA.
Configuration du contrôle parental DVD-Recorder Contrôle parental Pas de disque Programme Mot de passe :Off Non ► Oui Paramétrer La fonction Contrôle parental peut être utilisée avec des DVD ayant reçu un niveau de censure, ce qui permet de contrôler le type de DVD qui peuvent être regardés en famille. Un disque comporte 8 niveaux d’évaluation. 1. Appuyez sur le bouton MENU, appareil en mode Arrêt/Pas de disque. 2.
Configuration du magnétoscope Cette fonction vous permet de configurer le magnétoscope. 1. Appuyez sur le bouton MENU, appareil en mode Arrêt/Pas de disque. 2. Appuyez sur les boutons ▲▼ pour sélectionner Paramétrer, puis appuyez sur le bouton OK ou ►. 3. Appuyez sur les boutons ▲▼ pour sélectionner Système, puis appuyez sur le bouton OK ou ►. 4. Appuyez sur les boutons ▲▼ pour sélectionner VCR, puis appuyez sur le bouton OK ou ►. 5.
▌ Syst. Couleur DVD-Recorder Système Pas de disque Programme Durée de la cassette : E180 ► Paramétrer Lecture automatique : Oui ► Répétition automatique : Non Automatique IPC : Oui PAL Syst. Couleur : Automatique SECAM ► ► ► MESECAM B/W OK DÉPLA. REVENIR QUITTER Avant d’enregistrer ou de lire une bande, vous pouvez sélectionner la norme système désirée. • Automatique : Lorsque vous lisez une bande, la norme est automatiquement sélection-née par le combiné enregistreur DVD-magnétoscope.
8. Appuyez sur les boutons ◄ ► pour sélectionner Oui puis appuyez sur le bouton OK pour lancer l’enregistrement. En modes XP et SP, vous devez enregistrer au moins 5 minutes pour créer un chapitre. En modes LP et EP, 15 minutes. 1/1 JAN/01/2007 09:41 PR1 JAN/01/2007 09:45 PR1 JAN/01/2007 09:50 PR1 JAN/01/2007 12:00 PR1 JAN/01/2007 12:30 PR1 JAN/01/2007 12:40 PR1 Précédent Haut 10.
Anynet+ (HDMI-CEC) (DVD-VR355 uniquement) DVD-Recorder Système Pas de disque Programme VCR Paramétrer Mode DVD EP : 6 Heures ► Créateur de chapitre : Non ► Enregistrement rapide : Non ► ► Anynet+ (HDMI-CEC) Non ► Oui DÉPLA.
Lecture Cette section décrit les fonctions de lecture de base selon le type de disque utilisé. Lisez attentivement les instructions ci-dessous avant d’amorcer la lecture d’un disque. Code de région (pour DVD-Vidéo seulement) Les disques comportent tous un code de région; il en va de même pour cet enregistreur DVD avec magnétoscope. Le code de région du disque et celui de l’appareil doivent correspondre pour que le disque puisse être lu. Si les codes ne correspondent pas, le disque ne sera pas lu.
▌ Disques ne pouvant être lus avec cet appareil ● Les DVD-Vidéo dont le code de région est différent de “2” et de “ALL”. ● Les disques DVD-R de 3,9 Go pour système auteur. ● Un DVD±R/DVD-RW(V) enregistré et non finalisé sur un enregistreur d'une marque différente. ● Disques vidéo DVD-ROM disques de format PD et MV, etc. ● CVD/CD-ROM/CDV/CD-G/CD-I ■ Cet enregistreur DVD avec magnétoscope ne prend en charge que les disques compatibles au DVD-RAM de version 2.0.
Utilisation du Disc Menu et du Title Menu Certains disques comportent un système de menus spécifique qui permet d’utiliser des fonctions spéciales pour certains éléments: titres, chapitres, pistes audio, sous-titres, bandes-annonces, personnages, etc. ▌ Pour les DVD vidéo Menu disque : Appuyez sur le bouton DISC MENU pour accéder au menu du disque. • Accédez au menu de configuration associé à la lecture. • Vous pouvez sélectionner la langue de la bandeson et les sous-titres proposés par le disque.
■ Le son est coupé lors d’une recherche par balayage, sauf avec un CD audio (CD-DA). (Il est possible d’entendre le son pendant une recherche rapide (Rapide 1) sur le disque.) Aucun son n'est émis lors du balayage des fichiers MPEG4 dans tous les modes. En fonction du type de disque, la qualité du volume sonore peut diminuer en mode Fast 1 (Rapide 1). ▌ Sauts de chapitre ou de piste Appuyez sur la touche ◄◄ ou ►►l de la télécommande pendant qu’une lecture est en cours.
▌ Lecture par sauts En mode Still (Pause), appuyez sur le bouton F.ADV/SKIP de la télécommande. • Chaque fois que vous appuyez sur cette touche, l’affichage avance d’une image. Appuyez sur la touche ►ll pour revenir à la vitesse de lecture normale. ■ Le son est coupé lors d’une lecture au ralenti ou parsauts. Utilisation du bouton ANYKEY La fonction ANYKEY vous permet de rechercher facilement la scène de votre choix en accédant au titre, au chapitre, à la plage ou à l’heure.
Lecture à répétition ▌ Lecture répétée DVD-VIDEO Titre 1/2 Chapitre 1/28 Temps 00:00:27 Sous-titre ENG Audio ENG D 5.1CH Répétition Non Angle 1/1 Zoom Non DÉPLA. CHANG. 1. Appuyez sur la touche ANYKEY durant une lecture. 2. Sélectionnez Répétition déplaçant la barre de sélection à l’aide des touches ▲▼. 3. électionnez le mode de répétition à l’aide du bouton ◄► puis appuyez sur OK.
Sélection de la langue de sous-titrage DVD-VIDEO Titre 1/2 Chapitre 1/28 Temps 00:01:03 Sous-titre ENG Audio ENG D 5.1CH Répétition Non Angle 1/1 Zoom Non DÉPLA. CHANG. La prise en charge d’une langue de sous-titrage dépend du type de disque utilisé. Vous devez lire le disque pour vérifier si une langue de sous-titrage peut être appliquée. Vous pouvez également activer cette fonction en appuyant sur le bouton AUDIO de la télécommande. 1. Appuyez sur la touche ANYKEY durant une lecture. 2.
Utilisation des signets Signet 1 2 - - - - - - - -- (mode V) Permet de définir des repères pour retrouver rapidement des scènes particulières et relancer la lecture à partir de ce point. DÉPLA. LECT. EFFACER REVENIR ▌ Réglage de signets 1. Appuyez sur la touche MARKER durant une lecture. 2. Lorsque la scène voulu apparaît, appuyez sur la touche OK. • Le chiffre 1 est affiché et la position de la scène est mémorisée. 3. Appuyez sur les touches ◄► pour vous déplacer vers la position suivante. 4.
Utilisation des repères Marqueur 01 02 - - - - - - - -- N : 2 (mode VR) ▌ Réglage de repères 1. Appuyez sur la touche MARKER durant une lecture. DÉPLA. LECT. EFFACER REVENIR 2. Lorsque la scène voulue apparaît, appuyez sur la touche OK. • Le chiffre 01 est affiché et la position de la scène est mémorisée. 3. Appuyez sur le bouton ◄► pour passer à la position suivante. 4. Appuyez à nouveau sur OK lorsque la scène voulue suivante apparaît.
Lecture d'un CD AUDIO (CD-DA)/MP3 1 2 3 3 4 6 5 7 8 7 ▌ Boutons de la télécommande servant à la lecture de CD audio (CD-DA)/MP3 1. Touche l◄◄ : Retour au début d’une piste si elle est en cours de lecture. En appuyant une seconde fois sur cette touche, l’enregistreur DVD avec magnétoscope passe à la piste précédente et amorce sa lecture.
▌ Lecture d’un disque MP3 Liste de musique MP3 SONG01 1. Insérez un disque MP3 dans le tiroir disque. 01/11 No. ► 0:00:06 002 SONG01 3.5MB 01/26/2007 003 004 005 006 SONG03 SONG04 SONG05 SONG06 MP3 PLAYMODE DÉPLA. 2. Appuyez sur les boutons ▲▼ pour sélectionner Navigation par Disque, puis appuyez sur le bouton OK ou ►. Titre ROOT SONG01 SONG02 OK 3. Appuyez sur les boutons ▲▼ pour sélectionner Musique, puis sur le bouton OK ou ►. REVENIR 4.
▌ Mode Options de lecture Liste de musique CD TRACK 1 01/15 No. Titre 001LECTURE TRACK 1 MODE 002 TRACK 2 Répétition : Non 003 TRACK 3 ■ 0:00:01 Option 004 lecture :TRACK Normal4 TRACK 005 TRACK 5 CDDA 006 TRACK 6 007 TRACK 7 DÉPLA. PLAYMODE OK Longueur 0:03:50 0:04:00 0:03:49 0:03:47 0:04:29 0:03:44 0:03:44 REVENIR QUITTER 1. En mode Still (Pause), appuyez sur le bouton ANYKEY. L’option Lecture apparaît en surbrillance. 2.
5-1. Si vous appuyez sur le bouton ►ll l’écran Vitesse diaporama s’affiche. Appuyez sur les boutons ◄ ► pour régler la vitesse du diaporama, puis sur le bouton OK. DVD-RW(VR) 5-2. Sélectionnez une image sur l’écran Album et appuyez sur le bouton OK Et sélectionnez un mode d’affichage (Album screen ( ), Slide show ( ), Rotation ( ) ou Zoom ( )) à l’aide des boutons ◄ ► puis appuyez sur le bouton OK. Vitesse diaporama Ralenti Normal Rapide : Permet de revenir à Album screen (Ecran Album).
■ Cet appareil peut lire les formats de compression vidéo suivants. Format du codec MPEG4 : DivX 3.11 DivX 4.x DivX 5.x DivXPro Xvid Compensation du mouvement : QPEL, GMC Format audio : “MP3”, “MPEG1 Audio Layer2”, “LPCM”, “AC3”, “DTS”, “MS ADPCM” ■ Certains fichiers MPEG4 créés sur un ordinateur ne peuvent être lus. C’est pour cette raison que les types de codec, les versions et les résolutions supérieures aux spécifications ne sont pas pris en charge.
Saut En mode de lecture, appuyez sur la touche F.ADV/SKIP pour repositionner la bande exactement l’équivalent de 30 secondes vers l’avant. En appuyant à plusieurs reprises sur la touche F.ADV/SKIP (jusqu’à quatre fois), vous pourrez repositionner la bande l’équivalent de deux minutes vers l’avant. Lecture au ralenti En mode Still (Pause), appuyez sur le bouton ►► pour activer la lecture en vitesse lente.
Enregistrement Cette section décrit différentes méthodes d’enregistrement sur DVD. Cet appareil permet d’enregistrer sur plusieurs types de disque. Avant d’enregistrer, lisez attentivement les instructions ci-dessous et choisissez le type de disque en fonction de vos préférences. Disques inscriptibles Cet appareil peut enregistrer sur les types de disque suivants : ● DVD-VR350 DVD-RAM DVD-RW DVD-R ■ Terminé - Le DVD-RW/±R est terminé après enregistrement.
▌ Formats d’enregistrement DVD-RAM Disque non formaté. Souhaitez-vous formater ce disque ? Oui Non DVD-RAM/-RW(mode VR) DVD±RW/+R Disque non initialisé. Souhaitez-vous initialiser ce disque ? Oui Lorsque vous insérez un disque vierge, le message cidessous apparaît. Les fonctions possibles varient d’un type de disque à l’autre. Sélectionnez le type de disque qui correspond le mieux à vos besoins. DVD-RAM : formatez le disque avant utilisation. DVD±RW/+R : initialisez le disque avant utilisation.
Vidéo ne pouvant être enregistrée Vous ne pouvez pas enregistrer de film protégé contre la copie. Les images protégées contre la copie ne peuvent être sauvegardées sur cet enregistreur DVD avec magnétoscope.
Enregistrement immédiat RAM VR XP PR 7 Durée disponible 00:28 Avant de démarrer DVD-VR355 uniquement 1. Assurez-vous que le câble d’antenne est branché correctement. 2. Appuyez sur le bouton OPEN/CLOSE et placez un disque enregistrable dans le tiroir disque. 3. Vérifiez la durée d’enregistrement restante sur le disque. Les DVD-RAM/DVD±RW/+R doivent être préalablement formatés ou initialisés avant de démarrer l’enregistrement. ▌ Enregistrement du programme en cours de visionnage 1.
■ Vous ne pouvez changer ni de mode d’enregistrement ni de programme lors d’un enregistrement. ■ L’enregistrement sera automatiquement arrêté s’il ne reste plus d’espace libre sur le disque. ■ Jusqu’à 99 titres peuvent être enregistrés sur les DVD-RAM/-RW/-R et jusqu’à 48 sur les DVD+RW/+R. ■ Si l’appareil tombe en panne durant un enregistrement (lors d’une panne d’électricité, par exemple), le titre en cours d’enregistrement ne sera pas sauvegardé sur le disque.
2. Appuyez sur la touche REC pour débuter l’enregistrement. 3. En mode d’enregistrement, appuyez à nouveau sur la touche REC pour active la fonction d’enregistrement immédiat (OTR). • L’expression “Durée d’enregistrement 0:30” apparaît sur l’afficheur et l’enregistreur DVD avec magnétoscope enregistrera pendant exactement 30 minutes. 4. Maintenez le bouton REC enfoncé pour augmenter la durée d’enregistrement jusqu’à 9 heures, par tranches de minutes préréglées.
Vitesse d’enregistrement (DVD) AUTO : Sélectionnez cette option lorsque vous voulez régler automatiquement la qualité vidéo. En mode AUTO, le mode d’enregistrement le plus approprié est réglé automatiquement, en fonction du temps restant sur le disque et de la durée d’enregistrement programmée. Cette fonction est sélectionnée uniquement pour un mode choisi parmi les modes XP, SP, LP et EP et vous pouvez utiliser ce mode pour l’enregistrement programmé.
Edition de la liste d’enregistrement programmée DVD-Recorder Liste d’Enregistrements Programmée DVD-RAM(VR) N° Heure actuelle 12:00 DVD-VR355 uniquement Vers Source Jour Démarrage Fin Vitesse V/P Éditer N° 01 Vers Source Jour Démar. DVD PR 01 Quoti. 12:00 14:00 Durée disponible DÉPLA. Suivez les instructions ci-dessous pour modifier la liste des enregistrements programmés. Fin Vitesse V/P SP Non 00:48 SP OK REVENIR QUITTER 1. Appuyez sur le bouton MENU, appareil en mode Arrêt. 2.
Utilisation de la fonction ShowView DVD-Recorder Programme DVD-RAM(VR) Liste deTitres Liste de Lture Gestion de Disque ShowView ► Liste d’Enregistrements Programmée ► ShowView étendu ► : Non Programme Paramétrer Copier OK DÉPLA. REVENIR QUITTER DVD-Recorder ShowView DVD-RAM(VR) Liste deTitres Liste de Lture Gestion de Disque Saisir le numéro ShowView.
MODE EZ REC DVD-VR355 uniquement Cette fonction vous permet d’initialiser et de finaliser automatiquement un disque. Appuyez sur “Oui” pour confirmer le Mode Enregistrement simplifié sinon appuyer sur “Non”. Oui 1. Appuyez sur le bouton EZ REC MODE de la télécommande lorsque l’appareil est en mode Arrêt/Aucun disque. Non 2. Appuyez sur les boutons ◄ ► pour sélectionner Oui, puis sur le bouton OK. Le EZ REC MODE est configuré. 3. Insérez un disque.
Fonctions de base d’enregistrement avec le magnétoscope Avant de commencer l’enregistrement 1. Vérifiez les connexions de l’antenne et des canaux du téléviseur. 2. Vérifiez la durée d’enregistrement disponible sur la bande vidéo. Vous pouvez enregistrer une émission en cours simplement en insérant une cassette vidéo vierge et en appuyant sur la touche z (REC). Vous pouvez également augmenter la durée des tranches préréglées jusqu’à 9 heures en appuyant de façon répétée sur le bouton z (REC).
Vérification de la durée restante RAM STOP 00:00:00 SP Rem 00:48 PR 1 Jan 01 2007 LUN VCR STOP 00:00:00 SP Rem 01:21 PR 1 12 : 00 1. Appuyez sur la touche INFO de la télécommande. L’information suivante s’affiche à l’écran: (l’état actuel du lecteur, la vitesse d’enregistrement, la durée restante, le canal source, l’heure actuelle.
Copie du DVD au magnétoscope et inversement DVD-VR355 uniquement Il est possible de copier du DVD au magnétoscope, et du magnétoscope au DVD. Vérifiez la durée restante sur la bande vidéo. DVD-RAM(VR) Editer liste à copier JAN/01/2007 ▌ Copie du DVD au magnétoscope 1/1 No. Titre Longueur Éditer 01 JAN/01/2007 12:0 00:00:11 √ Lecture Renommer Supprimer 1 Scène Jan/01/2007 12:00 DÉPLA. (mode VR) Éditer la Scène Copier JAN/01/2007 12:00 OK REVENIR QUITTER 1.
▌ Copie du magnétoscope au DVD DVD-Recorder VCR - -> DVD DVD-RAM(VR) No. Démar. 01 00:02:20 02 --:--:-- Fin Éditer --:--:-► Lecture --:--:-► Copier Suppr. 00:03:42 Arrêt Tout Copier DÉPLA. OK REVENIR QUITTER 1. Lorsque l’appareil est en mode Arrêt, appuyez sur la touche MENU. 2. Appuyez sur les boutons ▲▼ pour sélectionner Copier, puis appuyez sur le bouton OK ou ►. 3. Appuyez sur les boutons ▲▼ pour sélectionner VCR --> DVD, puis appuyez sur le bouton OK ou ►. 4.
Modifications Cette section présente les fonctions élémentaires de modification de DVD, et décrit les fonctions de modification applicables à un enregistrement sur disque et celles applicables à l’ensemble du disque. Lecture de la Liste de Titres DVD-VR355 uniquement DVD-RAM(VR) 3/4 JAN/01/2007 01:00 PR1 1. Appuyez sur la touche TITLE LIST. L’écran Liste de Titres s’affiche. No.
▌ Enregistrement dans l’espace libre DVD+RW Liste de Titres Espace Libre 5/7 No 01 APR/19/2007 02 APR/19/2007 03 APR/20/2007 04 APR/20/2007 05 Espace libre 06 APR/21/2007 07 Espace libre Espace libre PR10 SP DÉPLA. Titre OK REVENIR Longueur Éditer 12:00 00:00:21 ► 12:30 00:00:03 ► 12:00 00:00:15 ► 12:30 00:00:16 ► Engregistrement 00:00:15 √ 12:30 00:08:16 ► 03:40:27 ► Cette fonction n'est disponible qu'avec les disques DVD+RW.
▌ Verrouillage d’un titre par mesure de protection DVD-RAM(VR) Liste de Titres 3/4 JAN/01/2007 Suivez les instructions ci-dessous pour verrouiller un titre afin d’éviter qu’il ne soit supprimé par erreur. Protection titre : JAN/01/2007 01:00 PR1 Oui JAN/01/2007 Non XP DÉPLA. OK REVENIR DVD-RAM(VR) QUITTER Liste de Titres JAN/01/2007 3/4 JAN/01/2007 01:00 PR1 No.
▌ Suppression d’une partie d’un titre DVD-RAM(VR) Liste de Titres Suivez ces instructions pour supprimer un titre de la liste de titres. Liste de titres No. 03 Démar. Fin 00:00:02 (mode VR) 1. Appuyez sur la touche TITLE LIST. L’écran Liste de Titres s’affiche. 2. Sélectionnez le titre dont vous souhaitez supprimer une partie en déplaçant la barre de sélection à l’aide des touches ▲▼ puis appuyez sur OK ou sur ►. 3.
Eléments de l’écran Modification de chapitres DVD+RW Editer Capitre Capitre : 1/1 Montrer 00:00:00 ► Ajout. Suppr. DÉPLA. Cacher OK Tout supp. REVENIR Termi. c e f 1. Numéro et état du chapitre en cours 2. Barre de lecture 3. Durée de lecture 4. Menu Chapter Edit (Modification de chapitres) QUITTER d Lire une scène sélectionnée Editer Capitre DVD+RW Capitre : 1/2 Montrer 00:10:10 ► Ajout. Suppr. Cacher OK DÉPLA. Tout supp. REVENIR Termi.
Suppression de tous les chapitres DVD+RW Editer Capitre Suivez les étapes 1 à 3 de la procédure indiquée en page 68 4. Appuyez sur les boutons ◄ ► pour sélectionner Tout supp., puis appuyez sur le bouton OK. Souhaitey-vous supprimer I'ensemble des marques de chapitres? Non Oui ► Ajout. Suppr. DÉPLA. Cacher OK Tout supp. REVENIR 00:00:00 5. Appuyez sur les boutons ◄ ► pour sélectionner Oui, puis sur le bouton OK. Termi.
Modifications avancées Liste de Lecture Créer une Scène DVD-Recorder ▌ Création d’une Liste de Lecturet DVD-RAM(VR) Suivez les instructions ci-dessous pour créer un nouveau titre de Liste de Lecture à partir d’un titre enregistré. Scène No. 001 Démar. Fin Liste de Titres : 1/7 00:00:02 Démar. 00:00:00 00:00:02 ► Fin Faire REVENIR DVD-Recorder QUITTER Créer une Scène DVD-RAM(VR) Liste de Titres : 1/7 00:00:02 ІІ Fin DÉPLA. Faire DVD-RAM(VR) 00:00:08 00:00:08 Termi.
▌ Lecture de titres dans la Liste de Lecture DVD-RAM(VR) Éditer la Liste de Lecture 3/3 JAN/01/2007 Suivez les instructions ci-dessous pour lire les titres d’une Liste de Lecture. No. Titre Longueur Éditer 01 JAN/01/2007 12:00 00:00:03 ► 02 JAN/01/2007 12:30 00:00:25 ► Lecture 03 JAN/01/2007 12:0 00:00:05 ► Renommer Éditer la Scène JAN/01/2007 12:00 1 Scène Jan/01/2007 12:00 Copier Supprimer OK DÉPLA. REVENIR QUITTER DVD-Recorder Renommer DVD-RAM(VR) (mode VR) 1.
Lecture d’une scène sélectionnée Éditer la Scène DVD-Recorder DVD-RAM(VR) Scène No. 2 / 7 Liste de lect. No. 3 Lecture Modif. 01 00:00:05 02 00:00:00 03 00:00:00 04 00:00:05 05 00:00:00 06 00:00:00 Dépla. Ajout. OK DÉPLA. REVENIR DVD-Recorder Suppr. QUITTER Éditer la Scène DVD-RAM(VR) Scène No. 2/7 Liste de lect. No.3 Lecture Modif. 01 00:00:03 02 00:00:42 03 00:00:04 04 00:00:03 05 00:00:11 06 00:00:04 Suppr. REVENIR QUITTER Dépla. Ajout. OK DÉPLA.
Déplacement d’une scène (modification de la position d’une scène) DVD-Recorder Éditer la Scène Effectuez d’abord les étapes 1 à 3 de la page 72. DVD-RAM(VR) Scène No. 2/7 Liste de lect. No. 3 Lecture Modif. 01 00:00:03 02 00:00:42 03 00:00:04 Dépla. Ajout. 04 00:00:03 05 00:00:11 DÉPLA. OK 06 00:00:04 Suppr. REVENIR QUITTER 4. Appuyez sur les touches ▲▼◄ ► pour sélectionner la scène que vous souhaitez déplacer, puis appuyez sur la touche OK. 5.
Suppression d’une scène Éditer la Scène DVD-Recorder Effectuez d’abord les étapes 1 à 3 de la page 72. DVD-RAM(VR) Scène No. 2/8 Liste de lect. No. 3 Lecture Modif. 01 00:00:03 02 00:00:03 03 00:00:42 Dépla. Ajout. 04 00:00:04 05 00:00:03 DÉPLA. OK 06 00:00:11 REVENIR 4. Appuyez sur les touches ▲▼◄ ► pour sélectionner la scène que vous souhaitez supprimer, puis appuyez sur la touche OK. 5. Appuyez sur les boutons ▲▼ pour sélectionner Suppr., puis appuyez sur le bouton OK. Suppr.
Gestionnaire de Disque DVD-Recorder Renommer ▌ Modification du Nom du Disque DVD-RAM(VR) Suivez les instructions ci-dessous pour associer un nom à un disque. Disqus Enreg. Espace Espace Libre DÉPLA. OK Suppr. REVENIR QUITTER Gestionnaire de Disque DVD-Recorder DVD-RAM(VR) Liste Nom du Disque : Disque ► de Titres Liste Protection du Disque : Non Protégé ► de Lecture Gestion. Format du Disque ► de Disque Programme Supprimer Toutes les Listes de Titres ► Paramétrer Copier DÉPLA.
▌ Formatage du disque • DVD-RAM/+RW DVD-Recorder Gestionnaire de Disque DVD-RAM(VR) Liste Nom du Disque : ► de Titres Liste Protection du Disque : Protégé ► de Lecture Gestion. Format du Disque ► de Disque Souhaitez-vous formater ce disque? Programme Supprimer Toutes les Listes de Titres ► Oui Paramétrer DVD-VR355 uniquement Non 1. Lorsque l’appareil est en mode Arrêt, appuyez sur la touche MENU. Copier OK DÉPLA.
■ Après la finalisation d’un disque, il est impossible de supprimer certains titres. ■ Après la finalisation, un DVD-RW(mode V)/±R fonctionne de la même façon qu’un DVD-Vidéo. ■ L’information affichée à l’écran peut différer selon le type de disque utilisé. ■ La durée requise pour terminer une finalisation peut varier selon la quantité de données enregistrées sur le disque. ■ Les données contenues sur le disque seront endommagées si l’appareil est mis hors tension pendant un processus de finalisation.
▌ Suppression de toutes les Listes de Titres DVD-Recorder Gestionnaire de Disque DVD-RAM(VR) Liste Nom du Disque : ► de Titres Liste Disc Protection : Not Protected ► de Lecture Gestion. Disc Format supprimer : DVD-VR ► Souhaitez-vous toutes de Disque les listes de titres ? ► Programme Disc Finalise Paramétrer Oui Non Copier DÉPLA. OK REVENIR QUITTER DVD-VR355 uniquement 1. Lorsque l’appareil est en mode Arrêt, appuyez sur la touche MENU. 2. Appuyez sur les boutons ▲▼ pour sélectionner Gestion.
Outils de référence Dépannage (DVD) Si votre appareil ne fonctionne pas correctement, faites les vérifications décrites ci-dessous avant de communiquer avec un centre de service autorisé Samsung. Outils de référence Problème Cause possible et solution Absence d’alimentation.
Dépannage (DVD) Problème Cause possible et solution L’icône est affichée à l’écran. La fonction que vous essayez d’utiliser n’est pas disponible pour une des raisons suivantes: (1) Votre disque DVD n’est pas compatible avec cette fonction (par exemple, les angles de caméra). (2) Vous avez demandé un titre, un chapitre ou encore un temps de balayage qui est hors plage. Les paramètres de lecture diffèrent de ceux configurés dans le menu des réglages.
Dépannage (Magnétoscope) Faites les vérifications décrites ci-dessous avant de communiquer avec un centre de service autorisé Samsung. Problème Cause possible et solution Pas d’alimentation. • Assurez-vous que le cordon d’alimentation est branché à fond dans la prise de courant murale. • Avez-vous appuyé sur le bouton /I? Impossible d’insérer une cassette vidéo. • Une cassette vidéo ne peut être insérée que dans un sens : fenêtre vers le haut et onglet de protection face à vous.
Fiche technique Généralités Entrée Caractéristiques d’alimentation AC 220 - 240V, 50Hz Consommation électrique 30 Watts Poids 4.8 Kg Dimensions 430 (L) x 321 (P) x 79 (H) Températures de fonctionnement de 5°C à 35°C Autres conditions Maintenez le niveau lors du fonctionnement. Humidité de fonctionnement inférieure à 75% Entrée vidéo (arrière) Prise Péritel type européen : 1.
FRANCE Chers clients, nous vous remercions d'avoir acheté un produit SAMSUNG. La présente carte à pour objet de préciser les modalités de la garantie que la société Samsung Electronics France vous offre indépendamment des garanties qui vous sont déjà offertes par le revendeur à qui vous avez acheté votre produit, et des garanties prévues par la loi (notamment la garantie des vices cachés prévue aux articles 1641 et suivants du Code civil, et la garantie légale de conformité prévue aux articles L.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Contact Samsung wereldwijd Wanneer u suggesties of vragen heeft met betrekking tot Samsung producten, gelieve contact op te nemen met de consumenten dienst van Samsung.
Comment éliminer ce produit (déchets d’équipements électriques et électroniques) (Applicable dans les pays de l’Union Européen et aux autres pays européens disposant de systémes de collecte sélective) Ce symbole sur le produit ou sa documentation indique qu’il ne doit pas être éliminé en fin de vie avec les autres déchets ménagers.
Gebruiksaanwijzing DVD-VR350 DVD-VR355 English Français 01293C-VR350,355-XEB-NL.
Aan de slag Aan de slag Als afgeschermde kabels en stekkers worden gebruikt om het apparaat op andere apparaten aan te sluiten, voldoet dit product aan de CE-voorschriften. Gebruik afgeschermde kabels en stekkers voor aansluiting op andere elektrische apparaten, zoals radio’s en televisies, om elektromagnetische storingen te voorkomen. Waarschuwing OM DE KANS OP ELEKTRISCHE SCHOKKEN TE BEPERKEN, DIENT U DE BEHUIZING (OF DE ACHTERZIJDE) NIET TE WISSEN.
Voorzorgsmaatregelen Lees deze bedieningsinstructies zorgvuldig door voordat u het apparaat gebruikt. Volg elk van onderstaande veiligheidsinstructies. Houd deze instructies bij de hand voor toekomstig gebruik 1) Lees deze instructies. 2) Bewaar deze instructies. 3) Let op alle waarschuwingen. 4) Volg alle instructies. 5) Gebruik dit apparaat niet in de buurt van water. 6) Reinig het apparaat alleen met een droge doek. 7) Blokkeer geen ventilatieopeningen.
Aan de slag ▌ Schijven bewaren Zorg ervoor dat u de schijf niet beschadigt omdat de gegevens op deze schijven zeer kwetsbaar zijn. • Bewaar de schijf niet in direct zonlicht. • Bewaar de schijf in een koele, geventileerde omgeving. • Bewaar de schijf verticaal. • Bewaar de schijf in een schone beschermhoes.
DVD-RW’s afspelen en opnemen • U kunt op DVD-RW-schijven opnemen en deze zowel in V- als in VR modus afspelen. • Als een DVD-RW die in VR modus is opgenomen, is afgesloten, kunt u geen extra opnamen meer opslaan. • Wanneer een DVD-RW die in V modus is opgenomen, is voltooid, wordt dit een DVD-video. • In beide modi kunt u afspelen voordat en nadat de DVD is afgesloten, maar nadat de DVD is afgesloten, kunt u niet meer opnemen, wissen of bewerken.
Aan de slag Inhoud Aan de slag Systeem-installatie ■ Waarschuwing ........................................................ 2 ■ Menunavigatie op het tv-scherm ............................ 22 ■ Voorzorgsmaatregelen ........................................... 3 Belangrijke veiligheidsinstructies............................ 3 Waarschuwingen voor gebruik ............................... 3 Onderhoud van behuizing ...................................... 3 Gebruik van schijven ...................................
Bewerken ■ Een beeldschijf afspelen ........................................ 47 ■ Een MPEG4-schijf afspelen ................................... 48 Video’s afspelen ■ Een videoband afspelen(recorder) ......................... 49 Tracking .................................................................. 49 Speciale functies voorhet afspelen van video’s...... 49 Variabel zoeksysteem ............................................ 50 Opnemen Opnemen op DVD ■ Opneembare DVD’s ................................
Aan de slag Algemene informatie Groot aantal verschillende functies met eenvoudige gebruikersinterface ● DVD-VR350 Met dit apparaat kunt u hoogwaardige digitale afbeeldingen afspelen of opnemen op een DVD-RAM/ DVD-RW/DVD-R-schijf. U kunt, net als op videobanden, digitale video op een DVD-RAM/DVD-RW/DVD-R-schijf opnemen en bewerken. (DVD+RW/DVD+R-schijven kunnen wel worden afgespeeld maar er kan niet mee worden opgenomen.
Voordat u de gebruiksaanwijzing leest ▌ Stap 1 : Het schijftype kiezen Controleer voordat u gaat opnemen de schijftypen die beschikbaar zijn. Oppaassa käytetyt kuvakkeet Pictogram Woord DVD Definitie Een beschikbare functie voor DVD of DVD-RW(V)/DVD±R -schijven die zijn opgenomen en afgesloten. ● DVD-VR350 RAM Een beschikbare functie voor DVD-RAM’s (DVD+RW/DVD+R-schijven kunnen wel worden afgespeeld maar er kan niet mee worden opgenomen.) -RW Een beschikbare functie voor DVD-RW’s.
Aan de slag ▌ Stap 3 : Opnemen Er zijn twee verschillende opnamemethoden: directe opname en timer-opname. Een timer-opname is geclassificeerd als een datum: eenmaal, dagelijks of wekelijks Opnamemodus: XP (hogekwaliteitsmodus), SP (standaard kwaliteitsmodus), LP (langeopnamemodus) en EP (uitgebreide modus). ■ U kunt de schijf automatisch met de EZ REC MODE (OPNAMESTAND EZ) afsluiten.
U bepaalt of uw televisie compatibel is door de onderstaande instructies te volgen.
Aan de slag Beschrijving ▌ Voorpaneel (DVD-VR350) 1 5 1. 2. 3. 4. 5. 6. 7. 8. 6 7 2 8 9 3 10 DVD-RECORDER TOETS OPEN/CLOSE VAN DE DVDRECORDER VIDEORECORDER TOETS EJECT VAN DE VIDEORECORDER TOETS STANDBY/ON VIDEO-INGANG (AV3 IN) AUDIO-INGANG (AV3 IN) DV-INGANG 9. 10. 11. 12. 13. 14. 15. 16. 11 4 12 13 14 15 16 DE KNOP P.SCAN DISPLAY VOORPANEEL KEUZEKNOP DVD/VCR KOPIEERKNOPPEN PROG / -KNOPPEN OPNAMEKNOP DE KNOP STOP DE KNOP PLAY/PAUSE ▌ Voorpaneel (DVD-VR355) 1 5 1. 2. 3. 4. 5. 6. 7. 8.
▌ Display voorpaneel 2 3 7 1. 2. 3. 4. 5. 6. 7. 4 5 6 8 DVD is ingeschakeld. DVD-RAM is ingeschakeld. DVD(±)R of DVD(±)RW is ingeschakeld. Progressieve-scanmodus is ingeschakeld. Opnamefunctie is ingeschakeld. Videorecorder is ingeschakeld. DVD of CD is geplaatst. Aan de slag 1 9 8. 9. 10. 10 Tijd, positie van de teller of huidige recorderstatus wordt weergegeven. Wanneer u een timer-opname instelt, brandt dit lampje. Videocassette is geplaatst. ▌ Achterpaneel (DVD-VR350) 1 1. 2. 3. 4. 5.
Aan de slag ▌ Achterpaneel (DVD-VR355) 10 1. 2. 3. 4. 5. S-VIDEO-UITGANG AUDIO-UITGANGEN L EN R DIGITAL AUDIO OUT-AANSLUITING (OPTISCH/COAXIAAL) AUDIO/VIDEO-UITGANG (AV OUT) AV1 (TV) SCART-INGANG EN -UITGANG 6. 7. 8. 9. 10. 1 2 3 4 5 6 7 8 9 AV2 (EXT) SCART COMPONENTVIDEO-OUT AANSLUITINGEN UITGANG VOOR TV-AANSLUITING INGANG VOOR ANTENNESTEKKER HDMI-UITGANG (alleen DVD-VR355) Nederlands - 14 01293C-VR350,355-XEB-NL.
▌ De toetsen van de afstandsbediening 13. De toets SUBTITLE Druk hierop om een andere DVD-ondertiteltaal weer te geven. Aan de slag De afstandsbediening van uw DVD- en videorecorder kunt u ook voor Samsung-televisies en compatibele merken gebruiken. 14. De toets ANYKEY Druk hierop om de status van de schijf weer te geven die wordt afgespeeld 15. De toets REC Druk hierop om opnamen op DVD-RAM/DVD± RW/±R-schijvenen videobanden te maken. 16.
Aansluiten en instellen Aansluiten en instellen De DVD- en videorecorder op de tv aansluiten met de RF-kabel ■ Zorg ervoor dat de televisie en de DVD- en videorecorder zijn uitgeschakeld voordat u de kabels aansluit. 1. Verwijder de antenne- of netwerkinvoerkabel uit de televisie. 2. Sluit deze kabel achterop de DVD- en videorecorder aan op de 75Ω antenne-ingang die is gemarkeerd met . 3. Sluit de meegeleverde RF-kabel aan op de ingang op de DVD- en videorecorder.
▌ Situatie 2 : De DVD- en videorecorder op een satellietontvanger of een ander apparaat aansluiten 1. AV2 IN (EXT) : met behulp van 21-pins SCART-kabel Sluit de SCART-kabel met de satellietontvanger of een ander apparaat aan op de AV2-ingang (EXT) op de achterzijde van de DVD- en videorecorder. Nadat u deze verbinding hebt gemaakt, selecteert u de bron door op de toets INPUT SEL. voor de AV2ingangsbronnen te indrukken. 2.
De S-videokabel aansluiten Aansluiten en instellen Hiermee krijgt u een hogere weergavekwaliteit. S-Video verdeelt het beeldelement in zwart/wit (Y) en kleur (C) signalen voor een hogere weergavekwaliteit dan via de videouitgangsmodus composiet. 1. Sluit een uiteinde van de S-Video-kabel aan op de S-VIDEO-uitgang op de achterkant van de DVD-en videorecorder. 2. Sluit het andere uiteinde van de S-Video-kabel aan op de juiste ingang op de televisie. 3.
▌ Progressieve scan Uw TV moet een progressieve scaningang ondersteunen voor het bekijken van een progressieve scanvideo-uitgang. (zie pagina 29). HDMI/DVI aansluiten op een tv (alleen DVD-VR355) Als uw tv een HDMI/DVI-ingang heeft, sluit u de HDMI/ DVI-kabel aan op een tv. U zult genieten van beelden en geluiden met de beste kwaliteit. • Voor meer informatie over Progressieve instellingen, zie pagina 29. • Zorg ervoor dat de kleurgecodeerde aansluitingen overeenkomen.
■ Als u een Samsung TV via een HDMI-kabel op de DVD-recorder & VCR aansluit, kunt u de DVD-recorder & VCR gemakkelijk via de afstandsbediening van de TV bedienen. (Dit is alleen mogelijk met Samsung TV's die Anynet+(HDMICEC) ondersteunen) (Zie pagina 35) ■ Wat is de HDCP? HDCP (High-bandwidth Digital Content Protection) is een systeem voor het beschermen tegen kopiëren van DVD-inhoud die wordt uitgevoerd via HDMI. Het biedt een veilige digitale koppeling tussen een videobron (PC, DVD, etc.
Externe apparaten aansluiten ▌ Situatie 2 : Een DV-apparaat aansluiten op de DV IN-aansluiting ▌ Situatie 1 : Externe apparaten aansluiten op de AV3-aansluitingen • Als de camcorder een DV-uitgang heeft, zie pagina 55 voor meer informatie. Aansluiten en instellen Als de betreffende apparatuur de juiste uitgangen bevat, kunt u andere audio- en videoapparatuur op uw DVD- en videorecorder aansluiten met audio en videoinvoerkabels.
Systeem-installatie Menunavigatie op het tv-scherm DVD-Recorder Instellen Geen schijf Programma Systeem Instellen ► Klok instellen ► Taal ► Geluid ► Beeld ► Kinderslot ► Installeren OK ► EINDE TERUG Systeem-installatie VERPL. Met de menu’s op het scherm kunt u diverse functies op de DVD- en videorecorder in- of uitschakelen. Druk op de toets MENU om het schermmenu te openen en gebruik vervolgens de volgende toetsen om door de schermmenu's te navigeren. 1.
De datum en tijd instellen DVD-Recorder Klok instellen Geen schijf Programma Instellen Datum JAN Tijd Klok automatisch 01 2007 12 00 Aan MA VERPL. OK TERUG EINDE De DVD- en videorecorder bevat een 24-uurs klok en een kalender die voor het volgende worden gebruikt: • Het opnemen van programma’s automatisch stoppen. • De DVD- en videorecorder vooraf instellen voor automatische opname van een programma. • Nadat u de DVD- en videorecorder hebt gekocht, moet u de datum en tijd instellen.
Automatisch instellen U hoeft de stations niet vooraf in te stellen als u deze al automatisch hebt ingesteld (zie Inschakelen en automatisch instellen op pagina 22). De DVD- en videorecorder bevat een ingebouwde tuner voor de ontvangst van televisie-uitzendingen. U moet de stations die via de tuner worden ontvangen, vooraf instellen. Dit kunt u op de volgende manieren doen: VERPL.
Handmatig instellen Handmatig instellen PR CH Naam Decoder MFT Systeem 01 ◄ ► Uit L/L' Gereed VERPL. MOVE Als u de stations al automatisch hebt ingesteld, hoeft u ze niet handmatig in te stellen. OK 1. Con l’unità in modalità Arresto/Nessun disco, premere il tasto MENU. 2. Druk op de toetsen ▲▼ om Instellen te selecteren en druk op OK of op de toets ►. 3. Druk op de toetsen ▲▼ om Installeren te selecteren en druk op OK of op de toets ►. 4.
De taalopties instellen DVD-Recorder Taal Geen schijf Programma Geluid Instellen Ondertiteling Schijftaal Schermmenu DivX-ondertitel : Origineel Origineel : English Automatisch Français : English Deutsch : Nederlands Español OK 1. Druk met het apparaat in de modus Stop/Geen cd/dvd op de toets MENU. : Italiano Western Nederlands Korean VERPL.
De geluidsopties instellen Met de geluidsopties kunt u het geluid en de geluidsstatus instellen, afhankelijk van het gebruikte audiosysteem. U kunt ook de modus NICAM aanpassen. 1. Druk met het apparaat in de modus Stop/Geen cd/dvd op de toets MENU. 2. Druk op de toetsen ▲▼ om Instellen te selecteren en druk op OK of op de toets ►. 3. Druk op de toetsen ▲▼ om Geluid te selecteren en druk op OK of op de toets ►. Het menu met geluidsinstellingen verschijnt. 4.
De beeldopties (video) instellen Met deze functie kunt u de tv-scherminstellingen invoeren. 1. Druk met het apparaat in de modus Stop/Geen cd/dvd op de toets MENU. 2. Druk op de toetsen ▲▼ om Instellen te selecteren en druk op OK of op de toets ►. 3. Druk op de toetsen ▲▼ om Beeld te selecteren en druk op OK of op de toets ►. Het menu met video-opties verschijnt. 4. Druk op de toetsen ▲▼ om de gewenste videooptie te selecteren en druk op OK of op de toets ►. Systeem-installatie 5.
De video-uitgangen zijn als volgt beschikbaar. Beschikbare video-uitgangen Instellingsmodus Uitgang Componentmodus Modus P.SCAN uit Modus P.SCAN aan (interlace-modus) RGB-modus Componentuitgang (Y, PB, PR) O O (tv in progressiefmodus) X R, G, B Composite Composite Video-uitgang S-Video-uitgang X O O O X O O O O X O O AV1-scart Als uw tv Progressieve scan ondersteunt, drukt u op de toets P.SCAN op de voorkant van de DVD- en videorecorder om hogere kwaliteit videobeelden te krijgen.
Uitgangsselectie (alleen DVD-VR355) • Sluit de DVD- en videorecorder aan op uw tv via HDMI of DVI. Stel de tvingang in op HDMI of DVI. • Druk op de knop P.SCAN terwijl de eenheid in de stand Stop staat om de uitvoerresolutie te selecteren. - Als de tv is aangesloten met de HDMI- of DVI-kabel, verandert de uitvoerresolutiemodus iedere keer dat u op de knop P.
Parental Control (Kinderslot) instellen DVD-Recorder Kinderslot Geen schijf Programma Toegangscode :Off Uit ► Aan Instellen De functie Kinderslot werkt bij DVD’s die voorzien zijn van een classificatie. Zo kunt u controle houden over het type films waarnaar uw gezin kijkt. Een schijf bevat maximaal acht classificatieniveaus. 1. Druk vanuit de stopstand/modus Geen schijf op de toets MENU van de afstandsbediening. VERPL. OK TERUG EINDE 2.
Video-instelling Met deze functie kunt u de instellingen voor de videorecorder invoeren. 1. Druk met het apparaat in de modus Stop/Geen cd/dvd op de toets MENU. 2. Druk op de toetsen ▲▼ om Instellen te selecteren en druk op OK of op de toets ►. 3. Druk op de toetsen ▲▼ om Systeem te selecteren en druk op OK of op de toets ►. 4. Druk op de toetsen ▲▼ om VCR te selecteren en druk op OK of op de toets ►. 5. Druk op de toetsen ▲▼ om de gewenste videooptie te selecteren en druk op OK of op de toets ►.
▌ Kleurensysteem DVD-Recorder Systeem Geen schijf Programma Lengte cassette Instellen Automatisch afspelen : Aan ► Automatisch herhalen : Uit IPC :Automatisch Aan ► Kleursysteem ► : E180 ► PAL : Automatisch SECAM ► MESECAM B/W VERPL. OK TERUG EINDE Voordat u een videoband opneemt of afspeelt, kunt u de gewenste systeemstandaard kiezen. • Automatisch : wanneer een videoband wordt afgespeeld, wordt de systeemstandaard automatisch door de DVD- en videorecorder gekozen.
9. Druk op de toets STOP om het opnemen te stoppen. 10. U geeft de gemaakte titels weer door de schijf te sluiten (zie pagina 75) en op de toets TITLE MENU te indrukken. Het titelmenu verschijnt. 1/1 JAN/01/2007 09:41 PR1 JAN/01/2007 09:45 PR1 JAN/01/2007 09:50 PR1 JAN/01/2007 12:00 PR1 JAN/01/2007 12:30 PR1 JAN/01/2007 12:40 PR1 Vorige Boven 11. U geeft de gemaakte hoofdstukken weer door op de gewenste titel te klikken en op de toets DISC MENU te indrukken.
Anynet+(HDMI-CEC) (alleen DVD-VR355) DVD-Recorder Systeem Geen schijf Programma VCR Instellen DVD EP modustijd : 6 uur ► Hoofdstuk maken : Uit ► Snel opnemen ► ► : Uit Anynet+(HDMI-CEC) :Uit Aan ► 1. Druk vanuit de stand Stop (Stop)/No Disc (Geen schijf) op de knop MENU van de afstandsbediening. Aan VERPL. OK TERUG Anynet+ is een functie die kan worden gebruikt om met de afstandsbediening van een Samsung-TV de recorder te bedienen.
Afspelen In deze sectie worden de basisfuncties voor het afspelen per schijftype beschreven. Schijven die kunnen worden afgespeeld Lees de volgende informatie voordat u een schijf afspeelt. Typen schijven Regiocode (alleen DVD-video) DVDVIDEO Zowel de DVD- en videorecorder als de DVD’s zijn per regio gecodeerd. De regiocodes moeten overeenkomen om de DVD te kunnen afspelen. Als de codes niet overeenkomen, kunt u de DVD niet afspelen.
▌ Schijven die niet kunnen worden afgespeeld ● DVD-video met andere regiocode dan "2" of "ALLE". ● 3,9 GB DVD-R-schijf voor authoring. ● Een DVD±R/DVD-RW(V)-schijf die is opgenomen en niet is afgesloten op een recorder van een andere fabrikant. ● DVD-ROM/PD/MV-Disc enzovoort. ● CVD/CD-ROM/CDV/CD-G/CD-I ■ Deze DVD- en videorecorder kan alleen worden gebruikt met schijven die compatibel zijn met de DVD-RAM-standaard versie 2.0.
Het schijfmenu en het titelmenu gebruiken Sommige schijven bevatten een specifiek menusysteem waarmee u speciale functies kunt selecteren voor de titel, hoofdstukken, ondertiteling, voorvertoningen van films, informatie over personages, enzovoort. ▌ Voor DVD-VIDEO Disc Menu (Schijfmenu) : Druk op de knop DISC MENU om het schijfmenu van de schijf te openen. • Ga naar het instellingenmenu voor het afspelen.
■ Tijdens het zoeken hoort u geen geluid, behalve bij CD’s (CD-DA). (U kunt het geluid horen tijdens het vooruit zoeken (Snel 1) op de schijf.) Als u MPEG4-bestanden scant, hoort u in geen enkele modus geluid. Afhankelijk van het schijftype kan de geluidskwaliteit lager zijn tijdens de modus Snel 1. ▌ Hoofdstukken of tracks overslaan Paina toiston aikana kaukosäätimen painiketta l◄◄ of ►►l.
▌ Stap voor stap afspelen Druk in de stopstand op de knop F.ADV/SKIP van de afstandsbediening. • Iedere keer dat de toets wordt ingedrukt, verschijnt er een nieuw beeld. Als u de normale afspeelsnelheid wilt hervatten, drukt u op de toets ►ll. ■ U hoort geen geluid tijdens stapsgewijs of vertraagd afspelen. De toets ANYKEY gebruiken Met de ANYKEY-functies kunt u gemakkelijk naar een gewenste scène zoeken via de titel, het hoofdstuk, de track en het tijdstip.
Afspelen herhalen ▌ Herhaald afspelen DVD-VIDEO Titel 1/2 Hoofdstuk 1/28 Tijd 00:00:27 Ondertitels ENG Geluid ENG D 5.1CH Herhalen Uit Beeldhoek 1/1 Zoom Uit VERPL. 1. Druk tijdens het afspelen op de toets ANYKEY. 2. Druk op de toetsen ▲▼ om Herhalen te selecteren. WIJZIGEN 3. Selecteer de herhaalstand met de knop ◄ ► en druk vervolgens op OK. ■ DVD-RAM/-RW (VR tila), viimeistelemätön DVD-RW (V tila) ja viimeistelemätön DVD±R eivät toista jaksoa.
Taalkeuze voor Geluid DVD-VIDEO Titel 1/2 Hoofdstuk 1/28 Tijd 00:01:03 Ondertitels ENG Geluid ENG D 5.1CH Herhalen Uit Beeldhoek 1/1 Afhankelijk van het schijftype kunnen talen voor hetgeluidsspoor niet werken. Deze functie is alleenbeschikbaar tijdens het afspelen. U kunt deze functie ook uitvoeren via de toets AUDIO op de afstandsbediening. Zoom Uit VERPL. WIJZIGEN 1. Druk tijdens het afspelen op de toets ANYKEY. 2.
De bladwijzers gebruiken Favoriet 1 2 - - - - - - - -- (V modus) Plaats markeringen bij scènes die u nogmaals wilt zienzodat u vanaf de gemarkeerde positie kunt afspelen. VERPL. AFSP. WISSEN TERUG ▌ Favorieten instellen 1. Druk tijdens het afspelen op de toets MARKER. 2. Druk op OK wanneer de gewenste scène wordtweergegeven. • Het getal 1 wordt weergegeven en de scènewordt in het geheugen opgeslagen. 3. Druk op de toets ◄► om naar de volgende positie te gaan. 4.
De markeringen gebruiken Markeren 01 02 -- -- -- -- -- -- -- -- N : 2 ▌ Markeringen instellen (VR modus) 1. Druk tijdens het afspelen op de toets MARKER. VERPL. AFSP. WISSEN TERUG 2. Druk op OK wanneer de gewenste scène wordtweergegeven. • Het getal 01 wordt weergegeven en de scènewordt in het geheugen opgeslagen. 3. Druk op de knop ◄► om naar de volgende positie te gaan. 4. Druk weer op OK wanneer de gewenste scènewordt weergegeven.
Een audio-CD (CD-DA) / MP3 afspelen 1 2 3 3 4 6 5 7 8 7 ▌ Toetsen op de afstandsbediening voor het afspelen van muziek-cd's (cd-da)/MP3 1. De toets l◄◄ : terugkeren naar het begin van detrack als deze toetstijdens het afspelen wordt ingedrukt. Als u nogmaals op de toetsdrukt, gaat de recordernaar de vorige track en wordt deze track afgespeeld. Als u drie seconden nadat het afspelen is begonnen,op deze toetsdrukt, wordt de vorige track afgespeeld.
▌ Een MP3-schijf afspelen MP3 Muzieklijst Song 1 1. Plaats een MP3-schijf in de schijflade. 01/11 Nr. ► 0:00:06 Song 1 3.5MB 01/26/2007 MP3 Titel 002 003 004 ROOT Song 1 Song 2 Song 3 Song 4 005 006 Song 5 Song 6 VERPL. PLAY MODE OK 2. Druk op de toetsen ▲▼ om Schijfnavigatie te selecteren en druk op OK of op de knop ►. 3. Druk op de toetsen ▲▼ om Muziek te selecteren en druk op OK of op de knop ►. 4. Druk op de toetsen ▲▼ om de gewenste trackte selecteren en druk vervolgens op OK.
▌ De modus Afspeeloptie CD Muzieklijst TRACK 1 II 0:00:01 TRACK 1 CDDA PLAY MODE 01/15 Nr. Titel 001 TRACK 1 AFSPEELMODUS 002 TRACK 2 Herhalen : Uit 003 TRACK 3 Afspeeloptie : TRACK Normaal4 004 005 TRACK 5 006 TRACK 6 007 TRACK 7 VERPL. OK Lengte 0:03:50 0:04:00 0:03:49 0:03:47 0:04:29 0:03:44 0:03:44 EINDE TERUG 1. Druk op ANYKEY in de stopstand. De optie Afspeeloptie. wordt gemarkeerd. 2. Druk op de toetsen ◄ ► om de gewenste afspeeloptie te selecteren en druk op OK.
5-1. Als u op de knop ►ll drukt, verschijnt het scherm Snelheid diavoorstelling. Druk op de knoppen ◄► om de snelheid van de diavoorstelling in te stellen en druk op OK. DVD-RW(VR) 5-2. Druk op de knop OK terwijl een afbeelding is geselecteerd op het ), scherm Album. Selecteer een afspeelstand (Albumscherm ( ), Draaien ( ) of Zoomen ( )) met de Diavoorste lling ( knoppen ◄► en druk vervolgens op OK. Snelheid diavoorstelling Langz. Normaal Snel JPEG01 VERPL.
■ Met dit apparaat kunt u de volgende videocompressie-indelingen van MPEG4-codecs afspelen: DivX 3.11 DivX 4.x DivX 5.x DivXPro Xvid Bewegingscompensatie : QPEL, GMC Audio-indeling: “MP3”, “MPEG1 Audio laag2”, “LPCM”, “AC3”, “DTS”, “MS ADPCM” ■ Sommige MPEG4-bestanden die op een pc werden gemaakt, worden mogelijk niet afgespeeld. Daarom worden de Codectypes, versies en hogere resoluties dan de vermelde, niet ondersteund. ■ Ondersteunde bestandsindelingen voor ondertiteling: .smi, .srt, .sub, .psb, .txt, .
Overslaan Druk in de afspeelmodus op de toets F.ADV/SKIP om precies 30 seconden over te slaan. Druk maximaal 4 maal op de toets F.ADV/SKIP om 2 minuten over te slaan. Vertraagd afspelen Druk in de stopstand op de knop ►► om vertraagd af te spelen. Druk herhaaldelijk op de knop ►► voor vertraagd afspelen op respectievelijk 1/10, 1/7 of 1/5 van de normale afspeelsnelheid. Druk tweemaal op de knop PLAY voor normale weergave.
Opnemen In dit gedeelte vindt u beschrijvingen van verschillende opnamemethoden voor DVD’s. Met dit apparaat kunt u op verschillende schijftypenopnemen. Lees voordat u begint de volgende instructiesen kies het schijftype op basis van uw voorkeur. Opneembare DVD’s Met deze recorder kunt u op de volgende schijven opnemen. ● DVD-VR350 DVD-RAM DVD-RW DVD-R ■ Sluiten - Hiermee wordt de DVD-RW/±R gesloten zodat geenextra opnamen kunnen worden toegevoegd.
▌ Opname-indelingen DVD-RAM Ongeformatteerde schijf. Wilt u deze schijf formatteren? Ja Nee DVD±RW/+R DVD-RAM/-RW (VR modus) Ongeïnitialiseerde schijf Wilt u deze schijf initialiseren? Ja Omdat de beschikbare functies afhankelijk zijn van het schijftype,kunt u de schijf kiezen die het beste aan uw voorwaarden voldoet.Wanneer u een ongebruikte schijf in de recorder plaatst,wordt het volgende bericht weergegeven. DVD-RAM : Gebruiken nadat de schijf is geformatteerd.
Kopieerbeveiliging Met deze DVD- en videorecorder kunt u geen beeldenmet kopieerbeveiliging opnemen. Als de DVD- en videorecorder een kopieerbeveiligingssignaal ontvangt tijdens de opname,wordt de opname gestopt en verschijnt het volgendebericht op het scherm. U kunt tegen kopiëren beveiligde films niet opnemen. Kopieerbeveiligingssignalen Tv-uitzendingen met kopieerbeveiligingssignalen kunnen een van devolgende drie typen signalen bevatten: vrij kopiëren, éénmaal kopiërenen nooit kopiëren.
Direct opnemen RAM VR Beschikbare tijd 00:28 XP PR 7 alleen DVD-VR355 Voordat u begint 1. Controleer of de antennekabel is aangesloten. 2. Druk op de toets OPEN/CLOSE en plaats een schijf die opnames bevat in de schijflade. 3. Controleer de resterende tijd op de schijf. DVD-RAM/DVD±RW/+R-schijven moeten worden geformatteerd voordat de opname wordt gestart. De meeste nieuwe schijvenworden niet-geformatteerd verkocht. Zorg ervoor dat u de niet-geformatteerde schijven voor de opname formatteert. 4.
■ Tijdens een opname kunt u de opnamemodusen het programma niet wijzigen. ■ Als er onvoldoende ruimte over is, wordt eenopname automatisch beëindigd. ■ U kunt maximaal 99 titels opslaan op een DVD-RAM/-RW/-R-schijf en maximaal 48 titels op een DVD+RW/+R-schijf. ■ Als de stroomtoevoer wegens een stroomstoring of een andere oorzaak wordtonderbroken, wordt de titel die wordtopgenomen, niet op de schijf opgeslagen. ■ De opname wordt automatisch beëindigd alstegen kopiëren beveiligde beelden zijn geselecteerd.
2. Druk op de toets REC. 3. Druk in de opnamemodus nogmaals op de toets REC om OTR in te schakelen. • De opnameduur 0:30 verschijnt op het schermen er wordt exact 30 minuten opgenomen. 4. Druk nogmaals op REC om opnametijd in stappenvan 30 minuten en met een maximale duur van 9uur toe te voegen. • Wanneer de tijd is verstreken, wordt de opname wordt automatisch beëindigd. ▌ De opname beëindigen Druk op de toets STOP (■). Het bericht “Druk nogmaals op de knop STOP-toets om de timer-opname te annuleren”.
Opnamesnelheid (DVD) AUTO (AUTOMATISCH) : selecteer deze optie wanneer u de videokwaliteit automatisch wilt instellen. In de modus AUTO wordt de meest geschikte opnamemodus automatisch aangepast op basis van de overgebleven tijd op de schijf en de lengte van de tijdgestuurde opname. Met deze functie wordt slechts éénmodus geselecteerd in de modi XP, SP, LPen EPen ukunt deze modus voor timer-opnamen gebruiken.
Een timer-opnamewijzigen DVD-Recorder Lijst van geplande opnamen Huidige tijd 12:00 DVD-RAM(VR) alleen DVD-VR355 Nr. Op Bron Dag Begin Einde Snelheid V/P Bewerk Nr. 01 Op DVD Bron PR 01 Beschikbare tijd Einde Snelheid V/P Dag Begin Daily 12:00 14:00 SP Uit Volg de volgende aanwijzingen om de lijst met timeropnamen te bewerken. 00:48 SP 1. Druk in de stopstand op de toets MENU. VERPL. OK TERUG EINDE 2. Druk op de toets ▲▼ om Programma te selecteren en druk op OK of op de toets ►. 3.
De functie ShowView gebruiken DVD-Recorder Programma DVD-RAM(VR) Titellijst ShowView Afspeellijst Lijst van geplande opnamen ► Schijfbeheer ShowView verlengd ► : Uit Programma Instellen Kopiëren VERPL. OK EINDE TERUG DVD-Recorder ShowView DVD-RAM(VR) Titellijst Afspeellijst Geef ShowView-nummer in. [0-9] Schijfbeheer Programma Instellen Kopiëren NUMMER OK DVD-Recorder TERUG EINDE Lijst van geplande opnamen DVD-RAM(VR) Huidige tijd 12:00 Nr.
OPNAMESTAND EZ alleen DVD-VR355 Met behulp van deze functie kunt u een schijf automatisch initialiseren en voltooien. Druk op "Aan" om EZ REC mode te bevestigen Voor annuleren druk op "Uit" Aan 1. Druk vanuit de stand Stop (Stop)/No Disc (Geen schijf) op de knop OPNAMESTAND EZ van de afstandsbediening. 2. Druk op de knoppen ◄ ► om Aan te selecteren en druk vervolgens op OK. De opnamestand EZ wordt ingesteld. Uit 3. Plaats een schijf. Als de schijf nieuw is, wordt deze automatisch geïnitialiseerd. 4.
Standaard video-opnamen Voordat u begint 1. Controleer het tv-kanaal en de antenneaansluitingen. 2. Controleer de resterende tijd op de videoband. U kunt een uitgezonden tv-programma opnemen door eenlege videoband in de recorder te plaatsen en op de toets z (REC) te drukken. U kunt opnametijd in vooraf ingestelde stappen met een maximale duur van 9 uur toevoegen door meerdere malen op de knop z (REC) te drukken. ■ Controleer of de videoband een wisbeveiligingbevat.
De resterende tijd controleren RAM STOP 00:00:00 SP Rem 00:48 PR 1 JAN 01 2007 ZO VCR STOP 00:00:00 SP Rem 01:21 PR 1 12 : 00 1. Druk op de toets INFO op de afstandsbediening. De volgende informatie wordt weergegeven: (Huidige recorderstatus, opnamesnelheid,resteren de tijd, invoerkanaal, huidige tijd.) Speciale opnamefuncties Terwijl er wordt opgenomen, kunt u naar een ander kanaal of een ander medium kijken of opnametijd in vooraf ingestelde stappen toevoegen. 1.
Kopiëren naar DVD of video alleen DVD-VR355 U kunt van de DVD-recorder naar de videorecorderkopiëren en van de videorecorder naar de DVD-recorderkopiëren. Controleer de resterende tijd op de videoband. Kopieerlijst bewerken DVD-RAM(VR) JAN/01/2007 ▌ Van de DVD-recorder naar de videorecorder kopiëren 1/1 Nr. Titel Lengte Bewerken 01 JAN/01/2007 12:0 00:00:11 ► Afspelen Hernoemen Scène bew. JAN/01/2007 12:00 Kopiëren 1 Scène Verwijderen JAN/01/2007 12:00 VERPL. OK TERUG EINDE VR modus 1.
▌ Van video naar DVD kopiëren DVD-Recorder VCR - -> DVD DVD-RAM(VR) Nr. Begin 01 00:02:20 02 --:--:-- Einde Bewerken --:--:-► Afspelen --:--:-► Kopiëren Wissen 00:03:42 STOP Alles kopiëren VERPL. OK TERUG EINDE 1. Druk in de stopstand op de toets MENU. 2. Druk op de toetsen ▲▼ om Kopiëren te selecteren en druk op OK of op de toets ►. 3. Druk op de toetsen ▲▼ om VCR --> DVD teselecteren en druk op OK of op de toets ►. 4.
Bewerken In deze paragraaf komen de basisfuncties vanDVD-bewerking aan de orde en worden zowelbewerkingsfuncties uitgelegd voor het opnemen op een schijf als bewerkingsfunctiesvoor de hele schijf. De titellijst afspelen alleen DVD-VR355 3/4 JAN/01/2007 Nr. Titel JAN/01/2007 1. Druk op de toets TITLE LIST. Het scherm Titellijst verschijnt.
▌ Opnemen op Vrije Ruimte DVD+RW Titellijst Vrije Ruimt Vrije Ruimt PR 10 SP VERPL. 5/7 Nr. Titel 01 APR/19/2007 02 APR/19/2007 03 APR/20/2007 04 APR/20/2007 05 Vrije Ruimt 06 APR/21/2007 07 Vrije Ruimt OK Lengte Bewerken 12:00 00:00:21 ► 12:30 00:00:03 ► 12:00 00:00:15 ► 12:30 00:00:16 ► Openmen 00:00:15 √ 12:30 00:08:16 ► 03:40:27 ► TERUG Deze functie is alleen beschikbaar bij DVD+RW-schijven. Als er bestaande titels worden verwijderd, wordt nieuwe vrije ruimte gemaakt.
▌ Een titel vergrendelen (beveiligen) Titellijst DVD-RAM(VR) 3/4 JAN/01/2007 Volg onderstaande instructies om een titel te vergrendelen enzo te voorkomen dat deze per ongeluk wordt verwijderd. Titelbeveiliging : JAN/01/2007 01:00 PR1 Aan JAN/01/2007 Uit XP VERPL. OK TERUG DVD-RAM(VR) JAN/01/2007 01:00 PR1 1. Druk op de TITLE LIST toets. Het scherm Titellijst verschijnt. Titellijst 2.
▌ Een deel van een titel wissen Titellijst bewerken DVD-RW(VR) Volg onderstaande instructies om een sectie uit een titel uit de titellijst te verwijderen. Titellijstnr. 03 Begin Einde 00:00:02 Begin 00:00:00 1. Druk op de TITLE LIST toets. Het scherm Titellijst verschijnt. 00:00:02 ► Einde Wissen VERPL. Terug OK TERUG EINDE 2. Druk op de toetsen ▲▼ om uit de titellijst een titelte selecteren die u wilt wissen, en druk vervolgensop OK of op de toets ►. Titellijst bewerken DVD-RAM(VR) 3.
Schermelementen Hoofdstuk bewerken Hoofdstuk : 1/1 Bekijken 00:00:00 ► Toev. 1. Huidig hoofdstuknummer en status 2. Afspeelbalk 3. Afspeeltijd 4. Het menu Hoofdstuk bewerken Hoofdstuk bewerken DVD+RW Verw. Verborgen VERPL. OK All.wiss. TERUG Terug c e f EINDE Een hoofdstuk toevoegen d Volg stappen 1 tot 3 op pagina 68 Hoofdstuk bewerken DVD+RW Hoofdstuk : 1/2 Bekijken 00:10:10 ► Toev. Verw. VERPL. Verborgen OK All.wiss. TERUG Terug EINDE 4.
Alle hoofdstukken verwijderen DVD+RW Hoofdstuk bewerken Volg stappen 1 tot 3 op pagina 68 4. Druk op de knoppen ◄ ► om All. wiss. te selecteren en druk vervolgens op OK. 5. Druk op de knoppen ◄ ► om Ja te selecteren en druk vervolgens op de knop OK. Wilt u alle hoofdstukmerktekens wissen? Nee Ja ► Toev. Verw. VERPL. Verborgen OK 00:00:00 All.wiss. TERUG Terug EINDE ■ Wanneer u een hoofdstuk verwijdert, wordt alleen de hoofdstukmarkering verwijderd, maar niet de opgenomen video. ■ Het menu All.
Geavanceerd bewerken (Playlist) DVD-Recorder Scène maken ▌ Een playlist maken DVD-RAM(VR) Volg onderstaande instructies om een nieuwe playlist-titel van een opgenomen titel te maken. Scènenr. 001 Begin Einde Titellijst : 1/7 00:00:02 Begin 00:00:00 00:00:02 ► Einde VERPL. Maken TERUG DVD-Recorder EINDE Scène maken DVD-RAM(VR) Titellijst : 1/7 00:00:02 Einde VERPL. 00:00:08 00:00:08 ІІ Terug Maken OK TERUG EINDE Afspeellijst bewerken DVD-RAM(VR) 1/1 JAN/01/2007 Nr.
▌ Titels in de playlist afspelen Afspeellijst bewerken DVD-RAM(VR) JAN/01/2007 3/3 Volg onderstaande instructies om de playlisttitels afte spelen. Nr. Titel Lengte Bewerken 01 JAN/01/2007 12:00 00:00:03 ► 02 JAN/01/2007 12:30 00:00:25 ► Afspelen 03 JAN/01/2007 12:0 00:00:05 ► Hernoemen Scène bew. JAN/01/2007 12:00 1 Scène JAN/01/2007 12:00 Kopiëren Verwijderen VERPL. OK TERUG DVD-Recorder EINDE (VR modus) 1. Druk op de toets PLAYLIST terwijl de schijf isgestopt.
Een geselecteerde scène afspelen Scène bewerken DVD-Recorder DVD-RAM(VR) Scènenr. 2/7 Afspeellijstnr. 3 Afspelen Wijzigen 01 00:00:03 02 00:00:42 03 00:00:04 04 00:00:03 005 00:00:11 06 00:00:04 Verpl. Toev. VERPL. OK TERUG Verw. EINDE Scène bewerken DVD-Recorder DVD-RAM(VR) Scènenr. 2/7 Afspeellijstnr. 3 Afspelen Wijzigen 01 00:00:03 02 00:00:42 03 00:00:04 04 00:00:03 05 00:00:11 06 00:00:04 Verpl. Toev. VERPL. OK DVD-Recorder TERUG Verw.
Een scène verplaatsen (de positie van een scène wijzigen) Scène bewerken DVD-Recorder DVD-RAM(VR) Scènenr. 2/7 Afspeellijstnr. 3 Afspelen Wijzigen 001 00:00:03 002 00:00:42 003 00:00:04 Verpl. Toev. 004 00:00:03 005 00:00:11 VERPL. OK 006 00:00:04 TERUG Verw. EINDE Follow steps 1 to 3 on page 72. 4. Druk op de toetsen ▲▼◄ ► om de scène te selecteren die u van positie veranderen en druk op OK. 5. Druk op ▲▼ om Verpl. te selecteren en druk vervolgens op OK.
Een scène wissen Scène bewerken DVD-Recorder DVD-RAM(VR) Scènenr. 2/8 Afspeellijstnr. 3 Afspelen Wijzigen 01 00:00:03 02 00:00:03 03 00:00:42 Verpl. Follow steps 1 to 3 on page 72. 4. Druk op de toetsen ▲▼◄ ► om de scène teselecteren die u wilt wissenen druk op OK. 5. Druk op ▲▼ om Verw. te selecteren en druk vervolgens op OK. Toev. 04 00:00:04 05 00:00:03 VERPL. OK 06 00:00:11 Verw. EINDE TERUG Scène bewerken DVD-Recorder DVD-RAM(VR) Scènenr. 2/7 Afspeellijstnr.
Schijfbeheer DVD-Recorder ▌ De naam van de schijf bewerken Hernoemen DVD-RAM(VR) Gebruik onderstaande instructies om een schijf eennaam te geven. Schijf Opslaan Backspace VERPL. Spatie OK EINDE TERUG DVD-Recorder alleen DVD-VR355 Wissen Verwijderen Schijfbeheer DVD-RAM(VR) Titellijst Schijfnaam Afspeellijst Schijfbeveiliging : Niet beveiligd ► Schijfbeheer Schijfindeling ► Programma Alle titellijsten verwijderen ► : Disc ► 1. Druk in de stopstand op de toets MENU. 2.
▌ Een schijf formatteren • DVD-RAM/+RW DVD-Recorder Schijfbeheer DVD-RAM(VR) Titellijst Schijfnaam Afspeellijst Schijfbeveiliging : Niet beveiligd ► Schijfbeheer Schijfindeling 'Wilt u deze schijf formatteren? Alle titellijsten verwijderen ► Programma : Disc Ja Instellen ► 1. Druk in de stopstand op de toets MENU. VERPL.
■ Wanneer een schijf eenmaal is afgesloten, kunt ugeen titels uit de lijst van opnamen wissen. ■ Nadat de schijf is afgesloten, werkt de DVD-RW(V modus)/±R op dezelfde manier als een DVD-video-speler. ■ Afhankelijk van het type schijf kan het weergegevenscherm verschillen. ■ De sluitingstijd kan verschillen, afhankelijk van dehoeveelheid gegevens die op de schijf zijnopgenomen. ■ De gegevens op een schijf raken beschadigd, als derecorder wordt uitgeschakeld tijdens het sluiten.
▌ Alle Titellijsten Verwijderen DVD-Recorder Schijfbeheer DVD-RAM(VR) Titellijst Schijfnaam Afspeellijst Schijfbeveiliging : Niet beveiligd : Disc ► Schijfindeling Wilt u alle titellijsten verwijderen? Programma Alle titellijsten verwijderen Schijfbeheer Ja Instellen ► ► Nee OK 1. Druk in de stopstand op de toets MENU. 2. Druk op de toetsen ▲▼ om Schijfbeheer te selecterenen druk op OK of op de toets ►. Kopiëren VERPL. alleen DVD-VR355 ► EINDE TERUG 3.
Naslag Problemen oplossen (DVD) Als het product niet goed werkt, gaat u de onderstaande controlepunten na voordat u contact opneemt meteen erkend servicecentrum van Samsung. Verklaring/oplossing Geen stroom. • Controleer of de netstekker stevig in het stopcontact zit. • Ga na of de toets /I de DVD- en videorecorder is ingedrukt. De invoer wordt even- weergegeven wanneerhet apparaat wordting-eschakeld. Nadat de DVD- en videorecorder is ingeschakeld, duurt het even voordat dezegeïnitialiseerd is.
Problemen oplossen (DVD) Probleem Het pictogram wordt op het schermweergegeven. Verklaring/oplossing De bewerking of functie is niet mogelijk door een van de onderstaande redenen: (1) De DVD-schijf ondersteunt de functie niet (bijvoorbeeld beeldhoeken). (2) U hebt een titel, hoofdstuk of zoektijd gevraagd buiten het toegestane bereik. De instellingen vandea fspeelmodus zijn anders De schijf ondersteunt niet alle geselecteerde functies.
Problemen oplossen (VIDEO) Voer de volgende eenvoudige controles uit voordat u contact opneemt met een erkend Samsungservicecentrum. Probleem Verklaring/oplossing Geen stroom. • Controleer of de stekker in het stopcontact zit. • Hebt u op de toets /I gedrukt? U kunt geen videocassette plaatsen. • Een videocassette moet met het label aan de bovenzijde en het wispreventielipje naar u toe worden geplaatst. Het televisieprogramma is nietopgenomen.
Specificaties Algemeen Ingang Stroomvereisten AC 220 - 240V, 50Hz Energieverbruik 30 Watts Gewicht 4.8 Kg Afmetingen 430 mm (B) X 321 mm (D) X 79(H) Bedrijfstemperatuur. +5°C tot +35°C Overige condities Houd het apparaat horizontaal als dit is ingeschakeld. Zorgtijd ens gebruik voor een luchtvochtigheid van minder dan 75%.
NEDERLAND BELGIË Dit Samsung-product is gegarandeerd tegen fabricage- en/of materiaalfouten voor een periode van twaalf (12) maanden gerekend vanaf de oorspronkelijke aankoopdatum, tenzij in de nationale of Europese wet- of regelgeving een andere garantieperiode is vastgesteld. Indien aanspraak wordt gemaakt op een reparatie onder garantie, dient u het product te retourneren aan de winkelier waar u het product gekocht heeft.
LUXEMBOURG BELGIQUE Cet appareil Samsung est couvert par une garantie de douze (12) mois - à moins qu’une autre période de garantie ne soit fixée dans la législation ou réglementation nationale ou européenne - à partir de la date d’ achat, pour des défauts de fabrication et/ou matériaux utilisés. Pour revendiquer le droit de réparation sous garantie, vous devez retourner l’appareil chez le revendeur où vous l’avez acheté.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung. Contact Samsung wereldwijd Wanneer u suggesties of vragen heeft met betrekking tot Samsung producten, gelieve contact op te nemen met de consumenten dienst van Samsung.
Correcte verwijdering van dit product (elektrische & elektronische afvalapparatuur) Dit merkteken op het product of het bijbehorende informatiemateriaal duidt erop dat het niet met anderhuis-houdelijk afval verwijderd moet worden aan het einde van zijn gebruiksduur.