Operation Manual

English - 60
Recording
This function allows you Initialise and Finalise a disc automatically.
1.
With the unit in Stop mode/No Disc mode, press the EZ REC MODE
button on the remote control.
2. Press the ◄ ► buttons to select On, and then press the OK button.
The EZ REC MODE is set up.
3. Insert a disc.
If the disc is new, it will initialise automatically.
4. Press the REC button.
5. EZ REC MODE will Automatically Finalise the disc under the following
conditions.
- When you press the OPEN/CLOSE button on your DVD Recorder &
VCR after recording on at least 30% of the disc. The tray will open after
the disc has been fi nalised.
- When the disc is full, it will fi nalise automatically and the DVD Recorder
& VCR will remain in stop mode.
- When you make a timer recording and it occupies at least 30% of the
disc, the disc will fi nalise automatically and the DVD Recorder & VCR
will power off. Please note that auto fi nalisation will not work if the
DVD Recorder & VCR has more than one Timer Recording set in the
Scheduled Record List.
EZ REC MODE
DVD-VR355 only
If you insert a new DVD-RW disc, it will be formatted in V mode
after auto initialising.
If you select off, you must initialise (see page 52) and fi nalise the
disc manually in the Disc Manager menu.(see page 77)
The length of Recording is different according to recording mode.
(see page 52)
■
■
■
50%
Disc Initialise (DVD-V)
Now, initialising..
Off
On
Press “On” to confirm EZ REC mode.
Otherwise press “Off”
50%
Disc Finalise
Processing..
01293C-VR350,355-XEB-ENG.indb 6001293C-VR350,355-XEB-ENG.indb 60 2007-03-16 오후 5:16:182007-03-16 오후 5:16:18