Operation Manual
Reference
English - 80
Reference
Troubleshooting (DVD)
If your product malfunctions, go through the check points below before contacting a Samsung authorized
service centre.
Problem Explanation/Solution
No power.
• Check whether the power cord is securely plugged into the power outlet.
• Did you press the /I button of your DVD Recorder & VCR.
The input is displayed
for a while when the
power turns on.
The DVD Recorder & VCR requires some time to initialise after it is turned on.
If 'Quick Recording' function is set to on, the DVD Recorder & VCR will power on quickly,
which enables you to immediately record a desired channel. (see page 33)
Cannot record TV
programmes.
• Check whether the power cord is securely plugged into the power outlet.
• Did you set the DVD Recorder & VCR programme settings correctly?
• Check the free space on your disc.
• Check the antenna cable is connected.
Timer recording does
not work properly.
• Check the recording time, end time and current time settings again.
• Recording will be canceled if the power is interrupted due to a power failure or other
reason during recording.
Cannot record.
• Check whether the disc is formatted. This product can record on formatted discs only.
• Check whether your disc has a suffi cient free space.
I pressed the REC
button but there is no
response.
If a programme is copy protected, you cannot record it.
I forgot the password
for parental lock.
Press the PROG ( / ) buttons of your DVD Recorder & VCR at the same time when
the power is on, and then press the STANDBY/ON button.
All settings including password will revert to factory settings.
Do not use it if not absolutely required.
(Note that this function is available only when there is no disc inserted.)
Cannot play the disc.
• Check whether the disc is inserted correctly with the label facing up.
• Check the regional code of your DVD disc.
• This DVD Recorder & VCR cannot playback some types of disc.
No sound.
• Are you watching a programme in slow or skip mode?
If you are playing a programme at a speed other than normal speed, sound is not
output. (except for forward search Playback (Fast 1) and you cannot also hear during
scanning MPEG4 in all mode.)
• Check the connections and initial settings.
• Check whether the disc is damaged.
Clean up the disc, if necessary.
• Check whether the disc is inserted correctly with the label facing up.
01293C-VR350,355-XEB-ENG.indb 8001293C-VR350,355-XEB-ENG.indb 80 2007-03-16 오후 5:17:382007-03-16 오후 5:17:38