User Manual

English
English 39
04 Temp.
Temperature can only be adjusted in TIME DRY cycle. Press to change the
temperature of the current cycle. You can select from 5 different options
(Low to High). Please select the appropriate temperature depending on the
items in the load.
• High: For sturdy cottons or those labeled Tumble Dry.
• Medium: For permanent press, synthetics, lightweight cottons, or items
labeled Tumble Dry Medium.
• Low: For heat sensitive items labeled Tumble Dry Low or Tumble Dry
Warm. Provides the lowest heated drying temperature possible.
05 Time
Press Time to select a drying time for the selected cycle. This is available
only with TIME DRY, QUICK DRY, and AIR FLUFF. This button is not available
for Sensor Dry cycles because exact drying times are determined by
fluctuating humidity levels.
06 Wrinkle Prevent
Wrinkle Prevent provides approximately 180 minutes of intermittent
tumbling in unheated air at the end of the cycle to reduce wrinkling. Press
Wrinkle Prevent to activate this feature. The load is dry and can be removed
at any time during the Wrinkle Prevent cycle.
07 Eco Dry
This function is available with NORMAL and TIME DRY. With the Eco Dry
activated, drying takes a longer time but power consumption is reduced.
The drying time can be extended by up to 3 times normal depending on the
temperature and load. The Eco Dry function is enabled by default.
08 Damp Alert
This alert is available for all Sensor Dry cycles. Available dry levels are Less,
Normal, More, and Extra.
If a load contains mixed fabrics, the Damp Alert indicator blinks when
average dryness of the items in the load is 80 % dry. This lets you take items
that you don’t want fully dried or that dry quickly out of the dryer early while
letting others continue to dry.
09 Drum Light
Press to turn the interior lamp on or off. The lamp stays lit for 2 minutes after
it has turned on, regardless of whether the power is on or off or the door is
open or closed, and then turns off automatically.
10 Adjust Time
You can change the set time for the selected cycle. This is available only
with TIME DRY, QUICK DRY, and AIR FLUFF. To change the cycle time, press
Adjust Time or Adjust Time until the desired time is displayed.
11 Smart Care
The Smart Care function helps you diagnose and troubleshoot your dryer if it
has an issue.
12 Power Press to turn on/turn off the dryer.
13 Start/Pause (Hold to
Start)
Press and hold to start operation or press to stop operation.
Untitled-18 39 2023-06-29()  3:23:50