User Manual

35
/ 78
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
9. How to Service
9-2. Freezing Failure . (Foods are not frozen/cold.)
Refer to error display
in operation and function
Start
Change the
Comp.
Change Temp-Fuse
Y
N
N
Y
N
Y
Y
N
Y
N
Change the Controller
Change the
defective motor
Change Main PCB
Check lead wire
Change the
Defrost heater.
Check ice formation on Eva.
and if refrigerant leak
is found, repair it.
N
N
Y
Y
Y
N
N
■ How to check Defrost heater :
Measure resistance of the heater
∴ 35~42Ω → Good
※ Left & Right side of evaporator
Inverter Controller
is OK?
Does Comp.
work?
Any error code
on Front PCB?
F-Fan & C-Fan
work ok?
F-Fan & C-Fan
motor is ok?
Wiring connection
is ok?
Temp-Fuse is ok?
(on the evaporator)
Defrost heater
Is ok?
Ice formation on Eva.
is ok?
Y
■ How to check the inverter controller :
1) Empty the ice in the ice maker bucket
2) Run “Accella Ice” function in condition of icemaker on.
The M-PCB will send the signal “comp on” to controller.
3) Disconnect the connector(1,3pin) of controller from cabinet.
4) Measure voltage of connector on cabinet.
∴ DC5.4~6.6V → Good