User Manual

53
/ 78
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
Step Description Step Description
9
12
10
13
11
Remove two screws, and pull the tank to the front.
11. Disassemble/Assemble Procedures
※ Follow the reverse order when assembling.
Turn off the main water supply to the appliance.
11-2. Water Tank & Cover Vegetable Case & Pantry PCB Assembly
□ Remark :
• Remove any residual matter inside the water supply line after installation.
1) Turn on the main water supply to the refrigerator .
2) Dispense water using dispenser for approx.10min to clean water and remove air from the lines.
3) And then check there are no water leaks or drips coming out from the water tank and dispenser.
4) If necessary, run water through the dispenser more.
Remove two screws.
Take off the front cover from the water tank
assembly to see the water storage condition.
※ The water need to be removed from the water
line of refrigerator to replace new tank.
Unscrew the water valve assembly in machine
room. And separate the 5/16”(the big one) tube
from water valve.
Be careful not to be wet on the floor. Remove
the water inside water tank and water line.