User Manual

59
/ 78
!
WARNING
To avoid risk of electrical shock that can cause death or severe personal injury,
disconnect unit from power before servicing unless tests require power.
11-7. Cover Multi-duct Assembly
Step Description Step Description
1 5
2 6
3
4
□ Remark :
11. Disassemble/Assemble Procedures
Remove vegetable cases,
vegetable cover.
※ Follow the reverse order when assembling.
• Do not use the small screw in the upper side of Multi-duct Assembly. The screw could be loose.
Disconnect one sensor connectors and the
motor Connectors from back wall.
Remove one caps with a thin flat tool.
Loosen the upper
screw(big one; outside
diameter of thread 5mm)
and lower screw(small
one; outside diameter of
thread 4mm)
Hold the low side of the Cover Multi-duct and then
pull it to release hooks.
Remove Cover with a thin flat tool.