User Manual
Before you start
English 35
Before you start
Here are a few things you should know before starting your dryer.
Sort and load
• Put one wash load in the dryer at a
time.
• Do not mix heavy and lightweight items
together.
• To improve drying efciency for one or
two items, add a dry towel to the load.
• For best results, untangle items before
inserting them into the dryer.
• Overloading causes uneven drying and
wrinkling.
• Unless recommended on the care label,
do not dry woolens or berglass items.
• Avoid drying unwashed items.
• Do not dry items soiled with oil, alcohol,
gasoline, or other ammable materials.
Lint lter
A
To prevent a risk of re, make sure to
clean the lint lter before or after every
load.
1. Turn the dryer off.
2. Open the door, and then pull out the
lint lter (A) from inside the drum.
3. Open the lint lter by separating it at
the top. Remove the lint and any other
debris that has accumulated in the
lter.
4. Close the lint lter, reinsert the lint
lter into the dryer, and then close the
dryer door.
CAUTION
• Do not operate the dryer without the
lint lter in place.
• Do not use a damaged or broken lint
lter. This may reduce performance
and/or cause a re.
FlexDry_DM9600M_DC68-03381H-07_EN.indd 35 2019-06-03 2:57:19