User Manual

English 29
Operations
10 Delay Start
Delay a cycle for up to 24 hours in one-hour increments.
To increase the delay start time, press or hold the Delay Start
button. The hour displayed indicates the time at which the
wash will start.
- After setting the delay time, press the START button, and
then close the door to start the cycle.
- To change the delay time after the dishwasher has started,
rst turn the dishwasher off and turn it back on. Then,
select a new cycle and change the delay time settings.
11 START
To start a cycle, press the START button before closing the
door.
Cancel & Drain: To cancel a currently running cycle and drain
the dishwasher, press and hold the START button for three (3)
seconds.
Once the dishwasher is reset, select a cycle and option, and
then press START to restart the dishwasher.
Indicators
Control Lock indicator
Lights up if Control Lock is activated, and blinks if
any button except for the POWER button is pressed.
Self Clean indicator
Lights up if Self Clean is activated, and blinks for
5 seconds every 20-22 cycles. The cycle counter
disappears when the Self Clean cycle is complete,
or the dishwasher reaches the 23rd cycle.
Rinse Rell indicator Lights up if the dishwasher runs out of rinse aid.
Smart Control Lights up if SmartThings is activated.
DW7000B_DW80B7070_AA_DD68-00243A-00_EN.indd 29 2021-11-11  12:43:26