This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Prevent damage to subjects’ eyesight Warning—situations that could cause injury to yourself or others Do not use the flash in close proximity (closer than 1 m/3 ft) to people or animals. Using the flash too close to your subject’s eyes can cause temporary or permanent damage.
Health and safety information t Do not insert foreign objects into any of your camera’s compartments, slots, or access points. Damage due to improper use may not be covered by your warranty. t Do not swing your camera by the strap. This may cause injury to yourself or others. t Do not paint your camera, as paint can clog moving parts and prevent proper operation. t Paint or metal on the outside of the camera may cause allergies, itchy skin, eczema, or swelling for people with sensitive skin.
Health and safety information t Turn off the camera when inserting or removing the memory card. t Do not bend, drop, or subject memory cards to heavy impact or pressure. t Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera. t Never use a damaged charger, battery, or memory card. Turn off the camera near medical equipment Your camera can interfere with medical equipment in hospitals or health care facilities.
Health and safety information Important usage information Check that the camera is operating properly before use The manufacturer takes no responsibility for any loss of files or damage that may result from camera malfunction or improper use. Allow only qualified personnel to service your camera Do not allow unqualified personnel to service the camera or attempt to service the camera yourself. Any damage that results from unqualified service is not covered by your warranty.
Organization of the user manual Basic functions Copyright information 13 Learn about your camera’s layout, icons, and basic functions for shooting. t Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. t Mac is a registered trademark of the Apple Corporation. t HDMI, the HDMI logo and the term “High Definition Multimedia Interface” are trademarks or registered trademarks of HDMI Licensing LLC.
Indications used in this manual Icons used in this manual Shooting mode Indication Smart Auto S Icon Function Additional information Auto a Safety warnings and precautions Program p Scene s [ ] Camera buttons; for example: [Shutter] (represents the shutter button) DUAL IS d ( ) Page number of related information Smart Scene Detection D Movie v The order of options or menus you must select to perform a step; for example: Select > (represents Select >, and then ) * Annotation
Expressions used in this manual Pressing the shutter Exposure (Brightness) t Half-press [Shutter]: press the shutter halfway down t Press [Shutter]: press the shutter all the way down The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO speed. By altering the exposure, your photos will be darker or lighter.
Common questions You can get answers to common questions. Solve problems easily by setting shooting options. The subject's eyes appear red. This is caused by a reflection from the camera flash. t Set the flash option to Red-eye or Red-eye Fix. (p. 47) Red-eye Fix in the edit menu. (p. 82) t If the photo has already been taken, select Photos have dust spots. Dust particles floating in the air may be captured in photos when using the flash. t Turn off the flash or avoid taking photos in a dusty place.
Quick reference Taking photos of people t s mode > Beauty Shot, Portrait, Children f 34 t Red-eye, Red-eye Fix (to prevent or correct red-eye) f 47 t Face Detection f 52 Taking photos at night or in the dark t s mode > Night, Dawn, Fireworks f 34 t Flash options f 47 t ISO speed (to adjust the sensitivity to light) f 48 Taking action photos Adjusting the exposure (brightness) t ISO speed (to adjust the sensitivity to light) f 48 t EV (to adjust exposure) f 57 t ACB (to compensate for subjects ag
Contents Basic functions ............................................................... Unpacking ......................................................................... Camera layout ................................................................... Inserting the battery and memory card .............................. Charging the battery and turning your camera on ............. Charging the battery ............................................................ Turning on your camera .....................
Contents Shooting in the dark .......................................................... Preventing red-eye .............................................................. Using the flash .................................................................... Adjusting the ISO speed ...................................................... Changing the camera’s focus ............................................ Using macro ....................................................................... Using auto focus ....
Contents Transferring files to your computer (for Windows) .............. Transferring files using Intelli-studio ........................................ Transferring files by connecting the camera as a removable disk .................................................................................... Disconnecting the camera (for Windows XP) .......................... Transferring files to your computer (for Mac) ...................... Printing photos with a photo printer (PictBridge) ...............
Basic functions Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking Check your product box for the following items. Camera AC adapter/USB cable Rechargeable battery Strap User Manual CD-ROM (AD44-00143A)/(AD39-00165A) (4302-001226) (Sliver: AD63-02596A/ Black: AD63-02604A) (AD46-00309A) Quick Start Manual Cradle Touch pen (AD68-04779A) (AD97-18838A) (AD75-00070A) The illustrations may differ from your actual items.
Camera layout Before you start, familiarize yourself with your camera's parts and their functions. POWER button Shutter button Microphone Flash AF-assist light/timer lamp Internal antenna* Lens * Avoid contact with the internal antenna while using the wireless network.
Camera layout Status lamp t Blinking: When saving a photo or video, being read by a computer or printer, out of focus, connecting to a WLAN, sending a photo, or turning on the Bluetooth feature t Steady: When connecting to a computer or in focus Playback button Zoom button t Zoom in or out t Zoom in on part of a photo or view files as thumbnails HDMI port Accepts HDMI cable USB and A/V port Accepts USB cable or A/V cable 1 Touch screen 2 Basic functions 16
Inserting the battery and memory card Learn to insert the battery and an optional microSDTM memory card into the camera. Removing the battery and memory card Push gently until the card disengages from the camera and then pull it out of the slot. Memory card Insert a memory card with the gold-colored contacts facing up. Push the lock up to release the battery. Battery lock Battery Insert the battery with the Samsung logo facing down.
Charging the battery and turning your camera on Charging the battery Turning on your camera Before using the camera for the first time, you must charge the battery. Attach the USB cable to the AC adapter and then plug the end of cable with the indicator light into your camera. Press [POWER] to turn your camera on or off. t The initial setup screen appears when you turn on the camera for the first time. (p. 19) Turning on your camera in Playback mode Press [Playback].
Performing the initial setup The initial setup screen appears to allow you to configure the camera's basic settings. 1 Select Language. 2 3 Select a language. Select Time Zone (Time Zone). 4 5 6 Basic functions Select a time zone and select . t To set the daylight-saving time, select . Select Date & Time (Date & Time). Set the date and time, select a date format, and select .
Performing the initial setup 7 8 Select Calibration (Calibration). Tap the target on the screen with your touch pen. Calibration Tap directly in the center of the target for optimal performance. 9 Select to switch to the Shooting mode.
Learning icons The icons displayed will change according to the mode you select or the options you set. Icon A Description Icon Photo styles Smart filter effect l Available number of photos Available recording time Internal memory Memory card inserted B t t t A.
Using the touch screen Learn basic actions to use the touch screen. Use the supplied touch pen to touch or drag on the screen. Do not use other sharp objects, such as pens or pencils, to touch the screen. Doing so may damage the screen. Touching Touch an icon to select a menu or option. t When you touch or drag on the screen, discolorations will occur. It is not a malfunction but a characteristic of the touch screen. Touch or drag lightly to reduce these annoying effects.
Using the touch screen Using gestures Perform certain functions by drawing commands on the touch screen. Gesture Description Draw a horizontal bar to right or left to view the next or previous file. Draw an X to delete a photo. Draw a circle to rotate a photo.
Selecting a shooting mode Learn how to select a shooting mode. Your camera provides you with various modes for shooting. 1 2 Select the mode icon. Mode Select a mode. Basic functions 24 Description S Smart Auto: Take a photo by letting the camera select a scene mode as it detects. (p. 33) a Auto: Take a photo quickly and easily with minimal settings. (p. 27) p Program: Take a photo by setting options. (p. 38) s Scene: Take a photo with options preset for a specific scene. (p.
Selecting a shooting mode Selecting a shooting mode using motion recognition Your camera features a built-in motion sensor that allows you to quickly switch the shooting mode by tilting the camera. In Shooting mode, tilt the camera while touching and holding . Access the Movie mode (p. 38) Access the Smart Auto mode (p. 33) Motion recognition may not work well if you hold the camera parallel to the ground, as shown below. Access the Program mode (p.
Setting the touch screen and sound Learn how to change the basic settings for the touch screen and sound according to your preferences. Setting the display type for the touch screen Setting the sound 1 Set whether your camera emits a specified sound when you operate your camera. 2 In Shooting mode, select (In Playback mode, select . .) 1 2 3 Select an option. In Shooting or Playback mode, select M. Select Select an option.
Taking photos Learn basic actions to take photos easily and quickly in the Auto mode. 1 Make sure that the camera is in the a mode (Auto), the camera’s default shooting mode. 3 Half-press [Shutter] to focus. t A green frame means the subject in focus. t If not, select the mode icon a. 2 4 Press [Shutter] to take a photo. Align your subject in the frame. See page 30 for tips to get clearer photos.
Taking photos Digital zoom Zooming If the zoom indicator is in the digital range, your camera is using the digital zoom. The picture quality may deteriorate when you use the digital zoom. You can shoot close-up photos by adjusting the zoom. Your camera has a 7X optical zoom and 5X digital zoom. By using both, you can zoom in up to 35 times. Rotate [Zoom] right to zoom in on your subject. Rotate [Zoom] left to zoom out.
Taking photos Reducing camera shake (OIS) apsvD t OIS may not function properly when: - you move your camera to follow a moving subject - you use digital zoom - there is too much camera shake - the shutter speed is slow (e.g., when you select Night in the s mode) - the battery is low - you take a close-up shot t If you use the OIS function with a tripod, your images may be blurred by the vibration of the OIS sensor. Deactivate the OIS function when you use a tripod.
Tips for getting a clearer photo Holding your camera correctly Reducing camera shake t Set the Optical Image Stabilization option to reduce camera shake optically. (p. 29) t Select the d mode to reduce camera shake both optically and digitally. (p. 37) Make sure nothing is blocking the lens. When h is displayed Half-pressing the shutter button Half-press [Shutter] and adjust the focus. Focus and exposure will be adjusted automatically.
Preventing your subject from being out of focus t When you take photos in low light It may be difficult to get your subject in focus when: - there is little contrast between the subject and background - Turn on the flash. (p.
Extended functions Learn how to take a photo by selecting a mode and how to record a video or voice memo.
Shooting modes Take photos or record videos by selecting the best shooting mode for the conditions. Using the Smart Auto mode Icon In this mode, your camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes. 1 2 Description Appears when taking portraits at night. Appears when taking photos of landscapes with backlighting. Appears when taking portraits with backlighting.
Shooting modes 3 4 Half-press [Shutter] to focus. Using the Scene mode Press [Shutter] to take the photo. Take a photo with options preset for a specific scene. t If the camera does not recognize a proper scene mode, S will not change and the default settings will be used. t Even if there is a face detected, the camera may not select a portrait mode depending on the subject's position or lighting.
Shooting modes 3 Using the Beauty Shot mode Take a photo of a person with options to hide facial imperfections. 1 2 In Shooting mode, select a s To hide facial imperfections, select f option. an t Select a higher setting to hide a greater number of imperfections. . To make the subject's skin tone appear lighter (face only), select f an option. t Select a higher setting to make skin tone appear lighter.
Shooting modes Using the frame guide Adjusting the exposure in the Night mode When you want another person to take a photo of you, you can compose the scene with the frame guide feature. The frame guide will help the other person take a photo of you by showing the part of the pre-composed scene. In the Night mode, you can catch brief flashes of light as curved streaks by extending the exposure. Use a slow shutter speed to extend the time until the shutter closes.
Shooting modes 4 Select f Shutter Speed. Using the DUAL IS mode Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions. Aperture 1.0 2.0 Shutter Speed 4.0 8.0 16.0 Before correction 5 6 7 Select a value to adjust the shutter speed and select Align your subject in the frame and half-press [Shutter] to focus. . 1 2 Press [Shutter] to take the photo. 3 After correction In Shooting mode, select a d.
Shooting modes Using the Program mode Recording a video Set various options (except for shutter speed and aperture value) in the Program mode. Record videos of up to 20 minutes in length in high definition. The recorded video is saved as an H.264 (MPEG-4.AVC) file. 1 2 In Shooting mode, select a p. t H.264 (MPEG-4 part10/AVC) is a high-compression video format established by international standard organizations ISO/IEC and ITU-T.
Shooting modes 3 Select > Option To pause recording a sound option. Off: Record a video without sound. The camera allows you to pause temporarily while recording a video. With this function, you can record your favorite scenes as a single video. On: Record a video with sound. Select Description to pause while recording. Select Zoom Mute: Record a video without sound while zooming. 4 5 6 Set other options as desired. (For options, refer to “Shooting options.
Shooting modes Using the Smart Scene Detection mode In this mode, your camera automatically chooses the appropriate camera settings based on a detected type of scene. 1 2 3 4 Press [Shutter] to start recording. Press [Shutter] again to stop recording. t If the camera does not recognize a proper scene mode, D will not change and the default settings will be used. t The camera may not select the correct scene depending on shooting environments, such as camera shake, lighting and distance to the subject.
Recording voice memos apsd Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of shooting conditions. You will get the best sound quality when recording 40 cm away from the camera. Recording a voice memo 1 In Shooting mode, select f modes, select f > (repeatedly) Adding a voice memo to a photo 1 . (In some .
Shooting options Learn about the options you can set in Shooting mode.
Selecting a resolution and quality Learn how to change the image resolution and quality settings. Selecting a resolution SapsdvD Option As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase. 4320 X 3240: Print on A1 paper. 4000 X 3000: Print on A1 paper. 3984 X 2656: Print on A2 paper in wide ratio (3:2).
Selecting a resolution and quality When recording a video: 1 2 In the v and D modes, select f Selecting image quality . Select an option. 1280 X 720 HQ Photos you take are compressed and saved in JPEG format. Higher quality images will result in larger sizes. 1 In Shooting mode, select f > (In some modes, select f .) 2 Select an option. Fine Option apsd Description 1280 X 720 HQ: Play back high-quality files on an HDTV. 1280 X 720: Play back on an HDTV.
Using the timer SapsdvD Learn how to set the timer to delay shooting. 1 2 In Shooting mode, select 3 . Select an option. Press [Shutter] to start the timer. t The AF-assist light/timer lamp blinks. The camera will automatically take a photo at the specified time. t Select the timer icon or press [Shutter] to cancel the timer. t Depending on the selected face defection option, the timer is not available or some timer options are not available.
Using the timer 5 Using the motion timer 1 2 3 4 In Shooting mode, select . Pose for your photo while the AF-assist light/timer lamp is blinking. t The AF-assist light/timer lamp will stop blinking just before the camera automatically takes a photo. Press [Shutter]. Stand within 3 m from the camera within 6 seconds after pressing [Shutter]. Make a motion, such as waving your arms, to activate the timer. t The AF-assist light/timer lamp will start to blink rapidly when the camera detects you.
Shooting in the dark Learn how to take photos at night or in low light conditions. Preventing red-eye Using the flash aps If the flash fires when you take a photo of a person in the dark, a red glow may appear in the eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to flash options in “Using the flash.” Saps Use the flash when taking photos in the dark or when you need more light on your photos. 1 2 In Shooting mode, select . Select an option.
Shooting in the dark Option Description Adjusting the ISO speed Red-eye*: t The flash fires when the subject or background is dark. t The camera reduces red-eyes. The ISO speed is the measure of a film’s sensitivity to light as defined by the International Organization for Standardization (ISO). The higher ISO speed you select, the more sensitive to light your camera becomes. With a higher ISO speed, you can get a better photo without using the flash. Fill in: t The flash always fires.
Changing the camera’s focus Learn how to adjust the camera's focus according to your subjects. Using macro Using auto focus apdvD Use macro to take close-up photos of subjects, such as flowers or insects. Refer to macro options in “Using auto focus.” apdvD To take sharp photos, select the appropriate focus according to your distance from the subject. 1 2 In Shooting mode, select . Select an option.
Changing the camera’s focus Using smart touch focus apsd t If you do not touch any area on the screen, the focus frame will appear in the center of the screen. t Tracking a subject may fail when: - the subject is too small or the subject moves - the subject is backlit or you are shooting in a dark place - colors or patterns on the subject and the background are the same - the camera shakes excessively In these cases, the focus frame will appear as a white single-line frame.
Changing the camera’s focus Using one touch shooting Adjusting the focus area apsd apsd You can focus on your subject and take a photo with a touch of your finger. You can get clearer photos by selecting an appropriate focus area according to your subject’s location in the scene. 1 2 3 1 2 In Shooting mode, select f . Touch a subject to focus. In Shooting mode, select f . Select an option. Touch and hold the subject to take the photo. t Touch and hold until the level indicator fills up.
Using face detection apsd If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them. t In some scene modes, face detection is unavailable.
Using face detection Taking a self portrait shot Taking a smile shot Take photos of yourself. The focus distance will be set to closeup and your camera will emit a beep. The camera automatically releases the shutter when it detects a smiling face. In Shooting mode, select f . When your subject smiles broadly, your camera can detect the smile more easily. 1 2 In Shooting mode, select f . When you hear a quick beep, press [Shutter].
Using face detection Detecting eye blinking Using smart face recognition If your camera detects closed eyes, it will automatically take 2 photos in succession. The camera automatically registers faces that you frequently photograph. This feature will automatically prioritize the focus on those faces and favorite faces. This feature is available only when you use a memory card. In Shooting mode, select f . t Hold your camera still while “Capturing” is displayed on the screen.
Using face detection t The camera may recognize and register faces incorrectly depending on lighting conditions, remarkable changes in the subject's pose or face, and whether or not the subject is wearing glasses. t The camera can automatically register up to 14 faces. If the camera recognizes a new face when there are 14 registered faces, it will replace the face in the lowest priority with the new one. t The camera can detect up to 10 faces in one scene.
Using face detection 3 Select when the face list appears. t Your favorite faces are indicated with a on the face list. t You can register up to 6 favorite faces. t The flash option will be set to Off. t If you register the same face twice, you can delete one of the faces in the face list. Viewing your favorite faces In Shooting mode, select f > (In some modes, select f .) t Select . to change the ranking of your favorite faces. See page 69 for more information about the face list.
Adjusting brightness and color Learn how to adjust the brightness and color for better image quality. Adjusting the exposure manually (EV) 3 pdvD Select . t The adjusted exposure value will appear as shown below. Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo. Darker (-) 1 2 Neutral (0) t Once you adjust the exposure, the setting will remain the same.
Adjusting brightness and color Compensating for backlighting (ACB) p Option When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. In this case, set the Auto Contrast Balance (ACB) option. Description Off: ACB is off. On: ACB is on. t The ACB feature is always on in the a mode. t This feature is not available when Continuous, Motion Capture, or AEB is in use.
Adjusting brightness and color Changing the metering option pdvD Option The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select. 1 2 In Shooting mode, select f > . (In the v and D modes, select f Spot: t Your camera measures only the light intensity of the very center of the frame. t If a subject is not in the center of the scene, your photo may be improperly exposed.
Adjusting brightness and color Selecting a light source (White balance) pdvD Auto WB The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select an appropriate lighting condition to calibrate the white balance, such as Auto WB, Daylight, Cloudy, or Tungsten. Option Description Auto WB: Use automatic settings depending on the lighting conditions. Auto WB Daylight: Select when taking outdoor photos on a sunny day.
Adjusting brightness and color Defining your own white balance You can customize the white balance by taking photos of a white surface, such as a piece of paper. This will help you to match the colors in your photo with the actual scene according to your lighting condition. 1 2 In Shooting mode, select f 3 Press [Shutter]. . Aim the lens at a piece of white paper.
Using burst modes ps It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In these cases, select one of the burst modes. Option Description Motion Capture: While you are pressing [Shutter], the camera takes VGA photos (6 photos per second; maximum of 30 photos). 1 2 In Shooting mode, select f > (once or twice) AEB: t Take 3 photos with different exposures: normal, underexposed, and overexposed.
Improving your photos Learn how to improve your photos by applying photo styles, colors, or smart filter effects, or make some adjustments. Applying photo styles Defining your own RGB tone apdv Apply different styles to your photos, such as Soft, Vivid, or Forest. Soft 1 2 Vivid 1 In Shooting mode, select f > (once or twice) . 2 3 Select a color (R: Red, G: Green, B: Blue). Adjust the amount of the selected color. Forest Custom RGB In Shooting mode, select f > (once or twice) .
Improving your photos Applying smart filter effects apdv Apply various filter effects to your photos to create unique images. 1 2 In Shooting mode, select f > (once or twice) Select an effect. Option Description Normal: No effect Miniature Miniature: Make a photo of a life-size location or object look like a photo of a miniature scale model. Blurring parts of the photo makes the scene seem much smaller than it actually is.
Improving your photos Adjusting your photos p Contrast option Description Adjust the sharpness, saturation, and contrast of your photos. - Decrease the color and brightness. 1 2 + Increase the color and brightness. 3 In Shooting mode, select f > (twice) . Saturation option Select an adjustment option. t t t : Sharpness : Contrast : Saturation Select a value to adjust the selected item. -1 Sharpness option 0 +1 Decrease the saturation. + Increase the saturation.
Playback/Editing Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your photo printer, TV, or HDTV.
Playing back Learn actions to play back photos, videos, or voice memos, and managing files. Viewing files using motion recognition Starting Playback mode You can view files by tilting the camera. View photos or play videos and voice memos stored in your camera. 1 Press [Playback]. t The most recent file you have taken or recorded will be displayed. t If the camera is off, it will turn on. 2 Draw a horizontal bar left or right to scroll through files. t Select < to view the previous file.
Playing back Selecting a menu using motion recognition Your camera features a built-in motion sensor that allows you to quickly select a menu by tilting the camera. In Playback mode, tilt the camera while touching and holding . Set the current photo as your favorite photo* ( will appear on the top of the file.) Start a slide show (p. 74) Motion recognition may not work well if you hold the camera parallel to the ground, as shown below. ( Lock or unlock the current file will appear on the top of the file.
Playing back Display in Playback mode Icon Description Select a menu using motion recognition (p. 68) N M Information Use network menus and the Bluetooth feature (p. 94) Playback and settings menus Playback time of videos or voice memos Play videos or voice memos (Video p. 75/Voice memo p. 76) Icon Description Ranking your favorite faces Photo includes a voice memo v You can change the ranking of your favorite faces or delete them. This feature is available only when you use a memory card.
Playing back 2 a face. Select Option Description Type View files by the file type. Date View files by the date they were saved. Color View files by the dominant color of the image. 2 Week View files by the weekday they were saved. 3 Favorite View your favorite files. Face View files by recognized faces and favorite faces. (Up to 20 people) Edit Ranking 1 3 4 Select , or . to change the ranking of the face and select .
Playing back Protecting files Viewing files as thumbnails Scan thumbnails of files. Protect your files from accidental deletion. In Playback mode, rotate [Zoom] left to display 9 or 16 thumbnails (rotate [Zoom] right to return to the previous mode). 29 1 6 7 To select and protect files, 1 2 3 In Playback mode, select M. Select Protect Select. Select files you want to protect. t Select t Select to select all files. to cancel your selection. 20 To Do this Scroll through files Select < or >.
Playing back To protect all files, To delete all files, 1 2 1 2 In Playback mode, select M. Select Protect All Lock. In Playback mode, select M. Select Delete All Yes. Alternate way to delete a file Deleting files Delete single files or all files at once. You cannot delete protected files. While viewing a file in Playback mode, draw an X on the screen. To delete a single file, 1 2 In Playback mode, select a file . Select Yes to delete the file.
Playing back Using the recycle bin Copying files to the memory card If you activate the recycle bin, files you delete will be sent to the recycle bin instead of being deleted permanently. This applies to single files or selected files only–if you choose to delete all files, those files will not be sent to the recycle bin. To activate the recycle bin, 1 2 You can copy files from the internal memory to a memory card. 1 2 3 In Playback mode, select M. Select . Copy to Card. Select Yes to copy files.
Playing back Enlarging a photo Starting a slide show You can apply effects and audio to your slide show. This function does not work for videos or voice memos. In Playback mode, rotate [Zoom] right to enlarge a photo (rotate [Zoom] left to reduce a photo). The enlarged area and zoom ratio are indicated on the top of the screen. The maximum zoom ratio may vary depending on the resolution. Select arrows to move the enlarged area. 1 2 In Playback mode, select . Set a slide show effect.
Playing back Option Description Playing a video Music: Select background audio. You can play a video, capture an image from a video, or crop a video. Effect: t Select a transition effect. t Select for no effects. 3 Select 1 2 In Playback mode, select a video Use the following icons to control playback. to start the slide show. t Touch on the screen (except for option icons) to pause the slide show. t Select to adjust the volume of background audio or to mute the sound.
Playing back Trimming a video during playback Playing a voice memo 1 Select at the point where you want the new video to begin and select . 2 3 Select 4 to resume playback. Select at the point where you want the new video to end and select . Playing a voice memo 1 2 In Playback mode, select a voice memo Use the following icons to control playback. Select Yes. t The original video should be at least 10 seconds long. t The edited video will be saved as a new file.
Playing back Adding a voice memo to a photo 1 2 3 In Playback mode, select a photo M. Select Voice Memo On. Press [Shutter] to record a short voice memo (10 seconds maximum). Playing a voice memo added to a photo 1 In Playback mode, select a photo that includes a voice memo . 2 Use the following icons to control playback. t Press [Shutter] to stop recording a voice memo. Icon / Description Pause or resume playback. Stop playback. Adjust volume or mute sound.
Editing a photo Perform photo editing tasks, such as rotating, resizing, eliminating red-eyes, and adjusting brightness, contrast, or saturation. t Edited photos will be saved as new files. t When you edit photos that are or larger, they will be automatically resized to a lower resolution (except when rotating or resizing photos). Rotating a photo 1 2 In Playback mode, select a photo Select an option. Resizing photos . 1 2 In Playback mode, select a photo Select . an option.
Editing a photo Defining your own RGB tone Applying photo styles Apply a different color tone to the photo, such as Soft, Vivid, or Forest. 1 2 3 In Playback mode, select a photo Select a color (R: Red, G: Green, B: Blue). Adjust the amount of the color. Custom RGB Soft 1 2 Vivid Forest In Playback mode, select a photo Select . an option. t Select to define your own RGB tone. 4 Select Soft 3 Select . Playback/Editing 79 . .
Editing a photo Applying smart filter effects Apply various filter effects to your photos to create unique images. 1 2 In Playback mode, select a photo an effect. Select Miniature Miniature Vignetting 3 Fish-eye 1 Select Fish-eye 2 Playback/Editing 80 . .
Editing a photo Applying a special effect Correcting exposure problems Apply special effects to the photo, such as color filters or noise effects. Adjust ACB (Auto Contrast Balance), brightness, contrast, or saturation. 1 2 In Playback mode, select a photo Select . Adjusting brightness/contrast/saturation an option. 1 2 Elegant Option Description Add Noise: Add noise to the photo to give it an aged look. 3 Select . Select t t t . an adjustment option.
Editing a photo Editing photos of portraits Creating a print order (DPOF) You can improve your photos by hiding facial imperfections and removing red-eye. Select photos to be printed and set options, such as number of copies or paper size. t The memory card can be taken to a print shop that supports DPOF (Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home.
Editing a photo 5 Set DPOF options. Option Description Select whether to print the photos as thumbnails. (Select to print photos as thumbnails.) Specify the size of the print. 6 7 Select , or . to set the number of copies. Select . If you specify the print size, you can print photos only with DPOF 1.1-compatible printers.
Viewing files on a TV or HDTV Play back photos or videos by connecting your camera to a TV using the A/V cable. 1 2 3 4 5 In Shooting or Playback mode, select M 8 . Select . (twice) Video Out. Select a video signal output according to your country or region. (p. 115) Turn off your camera and TV. View photos or play videos using the touch screen on your camera. t The touch screen will function as the controller for the TV screen.
Viewing files on a TV or HDTV Viewing files on an HDTV You can view high-quality and uncompressed photos or videos on an HDTV using the optional HDMI cable. HDMI (High Definition Multimedia Interface) is supported by most HDTVs. 1 2 3 4 5 In Shooting or Playback mode, select M → . 6 7 Turn on your camera. • The HDTV will be powered on automatically and the camera screen will be displayed. View files using a remote control of your camera or HDTV. Select . (twice) → HDMI Size.
Transferring files to your computer (for Windows) Transfer files to your computer using the built-in Intelli-studio program. You can also edit files or upload files to your favorite websites. Requirements for Intelli-studio t Intelli-studio may not perform correctly on some computers, even when the computer meets the requirements. t If your computer does not meet the requirements, videos may not play correctly or it may take longer to edit videos. t Install DirectX 9.0c or above before you use the program.
Transferring files to your computer (for Windows) 5 Transferring files using Intelli-studio Intelli-studio will start automatically when you connect the camera to your computer with the USB cable. Turn on the camera. t The computer recognizes the camera automatically. If you set the USB option to Select Mode, select Computer from the pop-up window. The battery will be charged while the camera is connected to a computer with the USB cable. 6 1 2 3 4 In Shooting or Playback mode, select M . Select .
Transferring files to your computer (for Windows) Using Intelli-studio Intelli-studio is a built-in program that allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube. For details, select Help Help in the program. t If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool Install Intelli-studio on PC. t You cannot edit files directly on the camera.
Transferring files to your computer (for Windows) Icon Transferring files by connecting the camera as a removable disk Description 1 Open menus 2 Display files in the selected folder 3 Change to the Photo edit mode 4 Change to the Video edit mode 5 Change to the Sharing mode (You can send files by email or upload files to websites, such as Flickr or YouTube.
Transferring files to your computer (for Windows) 4 Turn on the camera. Disconnecting the camera (for Windows XP) t The computer recognizes the camera automatically. The way to disconnect the USB cable for Windows Vista/7 is similar. If you set the USB option to Select Mode, select Computer from the pop-up window. 5 On your computer, select My computer Removable Disk DCIM 100PHOTO. 6 Select the files you want and drag or save them to your computer.
Transferring files to your computer (for Mac) When you connect the camera to a Macintosh computer, the computer will recognize the device automatically. You can transfer files directly from the camera to the computer without installing any programs. Mac OS 10.4 or later is supported. 1 Connect your camera to a Macintosh computer with the USB cable. 2 Turn on the camera. t The computer recognizes the camera automatically and a removable disk icon will be displayed.
Printing photos with a photo printer (PictBridge) Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer. 1 2 3 4 In Shooting or Playback mode, select M 5 . Select . (twice) USB Printer. Select to print. t Select to set printing options. See “Configuring print settings” on page 93. With the printer on, connect your camera to the printer with the USB cable. Turn on your camera. 6 Select an option.
Printing photos with a photo printer (PictBridge) 7 8 9 Select < or > to scroll to a photo to print. Option Description Select , or . to set the number of copies and select . Date: Set to print the date. t If you selected to print the photos you want, repeat steps 7-8 for all photos to print. Reset: Reset the print options. File Name: Set to print the name of the file. Select Yes to confirm. Some options are not supported by some printers. t Printing starts. Select Cancel to cancel printing.
Wireless network/Bluetooth Learn to use several functions using wireless local area networks (WLANs) and the Bluetooth feature.
Connecting to a WLAN and configuring network settings Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings and learn how to enter text. This camera uses non-harmonised frequencies and is intended for use in all European countries. The WLAN can be operated indoors in the EU without restriction, but cannot be operated outdoors in France.
Connecting to a WLAN and configuring network settings 4 5 6 7 Select network profiles and options. Option Description Authentication Select a network authentication. Data Encryption Select an encryption type. Connecting to a WLAN manually 1 2 Select the password input field. Enter a password and select OK. t For information about entering text, refer to page 100. Select OK. 3 4 5 Select AP Setting. t The camera will search for and display available AP devices. Select an AP device.
Connecting to a WLAN and configuring network settings Network connection tips t Some AP devices will not allow your camera to connect to the network. t If you are far from the AP device, it may take long to connect to the network. t If there is any electronic equipment nearby that uses the same radio frequency (RF) signals, the camera may not connect to the AP device. t If the AP device has a non-English name, it may not appear in the search list or the name may appear jumbled or incomplete.
Connecting to a WLAN and configuring network settings Storing your information Storing email addresses Store your name and email address to send emails or to find out your camera on another device. Store up to 10 email addresses in your camera. You can use them when you send your photos via email. 1 2 3 1 2 4 5 6 7 In Shooting or Playback mode, select N n. Select User Setting. In Shooting or Playback mode, select N n. Select Email Address. Select the name input field and enter your name.
Connecting to a WLAN and configuring network settings Setting the file size to share Setting a password Set the file size you will share with other DLNA-authorised . devices. You can select either the original size or Restrict sending emails and configuring network settings by setting a password. 1 2 3 1 2 3 4 In Shooting or Playback mode, select N n. Select DLNA -Image Size. Select a size. In Shooting or Playback mode, select N n. Select . Setting Password On Confirm.
Connecting to a WLAN and configuring network settings Changing the password Entering text Change the password if necessary. To enter text when storing your information or email addresses, select the appropriate letters, symbols, and numbers. 1 2 3 4 5 In Shooting or Playback mode, select N n. User Setting: Name Select . Change Password. Enter the current password (4 digits). Enter a new password (4 digits). Enter the new password (4 digits) again.
Using photo or video sharing websites Upload your photos or videos to file sharing websites (available websites will be displayed on your camera). Icons on a website Accessing a website 1 In Shooting or Playback mode, select N . t The camera automatically connects to the WLAN via the last connected AP device. t If the camera has not connected to the WLAN, it automatically searches for available AP devices. (p. 95) 2 3 Select a website. Enter your login ID and password, and select Login.
Using photo or video sharing websites Uploading photos or videos 1 2 3 Select t The maximum photo resolution you can upload is , and the longest video you can upload is 30 seconds at 320 X 240 resolution or the video recorded using For Sharing. . Select < or > to scroll through files. Drag photos or videos to the selection area or select photos or videos, and select OK. Date t If the selected photo resolution is higher than , it will be automatically resized to a lower resolution.
Sending photos via email 1 In Shooting or Playback mode, select N . t The camera automatically connects to the WLAN via the last connected AP device. t If the camera has not connected to the WLAN, it automatically searches for available AP devices. (p. 95) 2 Enter email addresses for the sender and receiver. Sender/ Receiver Samsung 3 4 5 Select OK. Select Text Input and enter your email text. Select photos, or drag photos to the selection area and select OK.
Viewing photos or videos on the DLNA devices The Digital Living Network Alliance (DLNA) is an international technology standard for sharing media files between networked devices in your home. With this technology, you can view your photos or videos on a widescreen TV or another device. You cannot send or receive voice memos. Viewing photos or videos on a TV screen View your photos or videos on a TV that supports the DLNAauthorized Digital Media Player (DMP). 1 In Shooting or Playback mode, select N .
Viewing photos or videos on the DLNA devices t On a TV screen, you can view only photos or videos captured with your camera. t The distance between the camera and TV may be affected by the AP device. t If the camera is connected to 2 TVs, playback may be slowed. t The photos will be shared according to the size you set. (p. 99) The videos will be shared in their original sizes. t You can use this feature only with a DLNA-authorised Digital Media Players (DMPs).
Viewing photos or videos on the DLNA devices t When searching for DLNA-authorised devices on the network, the camera may not find all devices on the network. t If you power off the device abnormally while viewing photos or videos on a device, the camera considers the device to still be connected. t The photos will be shared according to the size you set. (p. 99) The videos will be shared in their original sizes. t You can use this feature only with a DLNA-authorised renderer.
Sending or receiving photos or videos with a camera Learn to send or receive photos or videos to or from camera of the same model. You cannot send or receive voice memos. Sending photos or videos to another camera 1 2 3 In Shooting or Playback mode, select N . Select Send. t The camera generates a password and displays it on the screen while waiting for a connection with the receiving camera. On the receiving camera, select the name of the sending camera.
Sending or receiving photos or videos with a camera t This feature uses an ad hoc wireless network. t You cannot send and receive files at the same time. Once you have received files, end the connection with the camera and then reconnect to the camera to send photos or videos. t The distance between two cameras may be affected by the efficiency of the ad hoc wireless network.
Sending photos via Bluetooth Bluetooth is a wireless protocol for exchanging data over short distances. With Bluetooth, you can send photos to other mobile phones or PDAs. However, you cannot receive photos from other devices and you cannot send videos or voice memos. 1 In Shooting or Playback mode, select N 4 . t The Bluetooth feature turns on. However, other Bluetoothenabled devices cannot find your camera. 2 To search for and display Bluetooth-enabled devices, select Yes.
Sending photos via Bluetooth 7 After sending is complete, select Yes. t The camera and the device are disconnected and the Bluetooth feature turns off. t You can send photos only to Bluetooth-enabled phones or PDAs that support the Object Push Profile (OPP). For details about OPP, visit http://gadgetguide.bluetooth.com. t The camera may not search for a specific Bluetooth-enabled device and send a photo to it depending on the device type.
Appendixes Refer to settings, error messages, specifications, and maintenance tips.
Settings menu Learn about various options to configure your camera's settings. 3 Accessing the settings menu 1 2 In Shooting or Playback mode, select M. Select a menu. Volume Off Beep Sound Low Shutter Sound Medium High Volume : Medium Start Sound Beep Sound : On AF Sound Shutter Sound :1 Start Sound : Off 1/2 4 : On AF Sound 1/2 Icon Select an option and save your settings. Description Sound settings: Set various camera sounds and volume. (p.
Settings menu Sound settings Display settings * Default * Default Item Description Item Description Volume Adjust the volume of any sound. (Off, Low, Medium*, High) Function Description Display a brief description of an option or menu. (Off, On*) Beep Sound Select a sound to be emitted when touching on the screen or switching modes. (Off, On*) Shutter Sound Select a sound to be emitted when pressing the shutter button.
Settings menu * Default * Default Item Description Item Description Set the duration for reviewing a captured image before returning to Shooting mode. (Off, 0.5 sec*, 1 sec, 3 sec) Language Select a language for the display text. Quick View Date & Time Set the date and time and select a date format. (Off*, yyyy/mm/dd, mm/dd/yyyy, dd/mm/yyyy) Time Zone Select a region and set the daylight-saving time (DST).
Settings menu * Default Item Description * Default Item Set whether to display the date and time on your photos when printing. (Off*, Date, Date & Time) Imprint t The date and time will be displayed on the bottomright corner of the photo in yellow. t The date and time may not be printed on some printer models. t If you select Text in the s mode, the date and time will not be displayed. Select the resolution of photos when playing back files on an HDTV with the HDMI cable.
Settings menu * Default Item Description USB Set the function to use via a USB connection with a computer or printer. t Computer*: Connect your camera to a computer for transferring files. t Printer: Connect your camera to a printer for printing files. t Select Mode: Select a USB mode when you connect your camera to another device. PC Software Set Intelli-studio to start automatically when you connect your camera to your computer.
Error messages When the following error messages appear, try these remedies. Error message Suggested remedies Error message Suggested remedies Low Battery Insert a charged battery or recharge the battery. Card Error t Turn off your camera and then turn it on again. t Remove your memory card and insert it again. t Format your memory card. (p. 114) Memory Full Delete unnecessary files or insert a new memory card. Card not supported. The inserted memory card is not available with your camera.
Camera maintenance Camera body Cleaning your camera Wipe gently with a soft, dry cloth. Camera lens and touch screen Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of cleaning paper and wipe gently. t Never use benzene, thinners, or alcohol to clean the device. These solutions can damage the camera or cause it to malfunction. t Do not press on the lens cover or use a blower brush on the lens cover.
Camera maintenance Memory card capacity About memory cards The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 1 GB microSDTM card: Memory cards you can use You can use microSDTM (Secure Digital) memory cards.
Camera maintenance About the battery Battery life Use only Samsung-approved batteries. Average time / Number of photos Battery specifications Mode SLB-11A Type Lithium-ion battery Cell capacity 1130 mAh Voltage 3.8 V Charging time (when the camera is switched off) Approx. 190 min Test conditions (when the battery is fully charged) This is measured under the following conditions: in the a mode, 14M resolution, Fine quality, OIS on. 1.
Camera maintenance Notes about charging the battery Notes about charging with a computer connected t If the indicator light is off, make sure that the battery is inserted correctly. t Turn off your camera when charging. t Turn on your camera after charging the battery for more than 10 minutes. t Using the flash or recording videos depletes the battery quickly. Charge the battery until the indicator light turns green.
Camera maintenance t Do not disassemble or puncture the battery with any sharp object. t Avoid exposing the battery to high pressure or crushing forces. t Avoid exposing the battery to major impacts, such as dropping it from high places. t Do not expose the battery to temperatures of 60° C (140° F) or above. t Do not allow the battery to come in contact with moisture or liquids. t Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Before contacting a service center If you are having trouble with your camera, try these troubleshooting procedures before contacting a service center. If you have attempted the troubleshooting solution and are still having problems with your device, contact your local dealer or service center. Situation Suggested remedies Cannot turn on the camera t Make sure that the battery is inserted. t Make sure that the battery is inserted correctly. t Charge the battery.
Before contacting a service center Situation Suggested remedies The camera screen works poorly If you use your camera at very low temperatures, it may cause the camera screen to malfunction or discolor. For better performance of your camera screen, use your camera in moderate temperatures. The memory card has an error The memory card has not been reset. Format the card. (p.
Before contacting a service center Situation Suggested remedies Your camera cannot play videos t You can play videos only with the Intellistudio program. Install the program on your computer. (p. 88) t Make sure that the USB cable is connected correctly. Intelli-studio is not functioning properly t End Intelli-studio and restart the program. t You cannot use Intelli-studio on Macintosh computers. t Make sure that the PC Software is set to On in the settings menu. (p.
Camera specifications Image sensor Shutter speed Type 1/2.3" (Approx. 7.76 mm) CCD Effective pixels Approx. 14.2 mega-pixels Total pixels Approx. 14.5 mega-pixels t Auto: 1/8 - 1/2,000 sec. t Program: 1 - 1/2,000 sec. t Night: 8 - 1/2,000 sec. t Fireworks: 2 sec. Lens Exposure Schneider-KREUZNACH lens f = 5.6 - 39.2 mm (35 mm film equivalent: 31 - 217 mm) Control Program AE Metering Multi, Spot, Center-weighted F-stop range F3.3 (W) - F5.
Camera specifications t Modes: Smart Scene Detection (Landscape, Effect Blue Sky, Natural Green, Sunset Sky), Movie t Photo Style Selector: Normal, Soft, Vivid, Forest, Shooting mode t Format: H.
Camera specifications t Photo Style Selector: Normal, Soft, Vivid, Forest, For 1GB microSDTM Retro, Cool, Calm, Classic, Negative, Sketch, Defog, Custom RGB Image Adjust: ACB, Brightness, Contrast, Saturation Smart Filter: Normal, Miniature, Vignetting, Fish-eye 1, Fish-eye 2 Special Effect: Color Filter, Elegant, Add Noise Face Effect: Face Retouch, Red-eye Fix Super Fine Fine Normal 4320 X 3240 122 240 353 4000 X 3000 142 278 409 3984 X 2656 160 312 454 3840 X 2160 206 401 588 3264
Camera specifications Interface Digital output connector USB 2.0 Audio output Mono (Internal speaker), Stereo (Microphone) Video output t A/V: NTSC, PAL (selectable) t HDMI 1.4: NTSC, PAL (selectable) DC power input connector 20 pin, 4.4V Power source Rechargeable battery Lithium-ion battery (SLB-11A, 1130 mAh) The power source may differ depending on your region. Dimensions (W x H x D) 103.8 x 58.3 x 19.6 mm Weight 161.
FCC notice t Declaration of Conformity FCC ID:A3LCL80 Trade Name Caution: Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Model No. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Index A B D Enlarging 74 ACB Battery in Playback mode 81 in Shooting mode 58 Adjusting Brightness 81 Contrast in Playback mode 81 in Shooting mode 65 Saturation in Playback mode 81 in Shooting mode 65 Sharpness 65 AF Lamp 115 Date and time 114 Entering text 100 Charging 121 Life 120 Specifications 120 Deleting files 72 Error messages 117 Digital Image Stabilization 37 Exposure 57 Beauty Shot mode 35 Digital zoom 28 Blink detection 54 Disconnecting the device 90 F Bluetooth 109 Display
Index Focus area Center AF 51 Multi AF 51 One touch shooting 51 Smart Touch AF 51 H Memory card Capacity 119 microSD 119 Half-pressing 7 HDMI size 115 Metering HDTV 85 Center 59 Multi 59 Spot 59 Focus distance Auto macro 49 Macro 49 Normal (AF) 49 I Icons 21 Motion recognition in Playback mode 68 in Shooting mode 25 O One touch shooting 51 Optical Image Stabilization (OIS) 29 P Photo quality 44 Photo styles Format 114 Imprint 115 Frame guide 36 Intelli-studio 88 Motion timer 46 Frame rate 3
Index R Service center 123 Recording Settings Video 38 Voice memo 41 Recycle bin 73 Red-eye in Playback mode 82 in Shooting mode 47 Reset 114 Resizing 78 Resolution Photo 43 Video 44 RGB tone in Playback mode 79 in Shooting mode 63 Rotating 73, 78 S Scene mode 34 Smart Scene Detection mode 40 Smart Touch AF 50 Accessing 112 Camera 114 Display 113 Sound 113 Smile shot 53 Special effects Add noise 81 Color filter 81 Elegant 81 Shooting mode Auto 27 DUAL IS 37 Movie 38 Program 38 Scene 34 Smart Au
Please refer to the warranty that came with your product or visit our website http://www.samsung.com/ for after-sales service or inquiries.