<< a >>
Instructions Getting to Know your camera Use this camera in the following order. Thank you for buying a Samsung Digital Camera. Set up the camera driver Take a picture Insert the USB cable Check the camera’s power Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.81) Take a picture. (p.
Danger Warning DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. ● Do not attempt to modify this camera in any way. To do so may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre.
Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. ● Leaking, overheating, or damaged battery could result in fire or injury. - Use battery with the correct specification for the camera. - Do not short circuit, heat or dispose of battery in fire. - Do not insert the battery with the polarities reversed. ● Remove the battery when not planning to use the camera for a long period of time.
Contents 24 24 25 25 25 26 27 27 27 27 28 30 31 32 33 34 36 36 37 37 37 37 << 04 >> How to use the MOVIE mode Recording the HD (High Definition) movie clips Recording the movie clip without sound Pausing while recording a movie clip (Successive Recording) Using Photo Style Selector Mode Things to Watch Out for When Taking Pictures Using the camera buttons to set the camera POWER button SHUTTER button OIS (Optical Image Stabilization) button ZOOM W / T button Using the AMOLED monitor to set the camera
Contents 49 50 51 52 52 53 53 54 54 55 55 56 57 Thumbnail/Enlargement button Playing Images Starting the slide show Protecting images Deleting images DPOF DPOF : IMAGES DPOF : Print size DPOF : Index Rotating an image Resize Effect Special Colour 57 57 57 57 Colour Filter Shaded Elegant Noise effect 58 Image Adjust 58 58 58 58 59 59 60 Red eye removal ACB Brightness control Contrast control Saturation control Anynet+(CEC) PictBridge SETUP 62 64 Setup menu Setup menu ( 64 64 64 65 OSD set Dis
Contents SOFTWARE 74 75 77 Warning indicator Before contacting a service centre Specifications 80 Software Notes 80 80 81 82 84 85 86 87 87 87 88 91 93 93 << 06 >> System Requirements QuickTime Player 7.4 : H.264(MPEG4.
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre.
Identification of features Front & Top Shutter button Power button Mode dial Speaker Flash Self-timer lamp Remote control sensor AF sensor [When Using the flash] Lens << 08 >> Instructions for the Built-in flash ● The flash opens automatically when you press the shutter button down half way. ● Do not open the flash by force. It may cause breakage of camera. ● When you don’t use the flash, close the flash to prevent breakage.
Identification of features Rear Camera status lamp Photo style selector dial Zoom W button (Thumbnail)/ Zoom T button (Digital zoom) Microphone AMOLED monitor Smart buttons Eyelet for camera strap BACK button / OIS button Play mode button << 09 >>
Identification of features Bottom Cradle (Optional) You can recharge your rechargeable battery, transfer a captured image to print, and download images with the cradle (optional). Tripod socket Battery cover lever Camera connection terminal USB port/AV connection terminal To open the battery chamber cover, slide it in the direction shown above.
Identification of features ■ Self-timer lamp Icon Status Description Blinking - For the first 7 seconds, the lamp blinks at 1 second intervals. - For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking For 2 seconds, the lamp blinks quickly at 0.25second intervals before taking a picture. Blinking A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a Power Source You should use the rechargeable battery (SLB-1137D) supplied with the camera. Be sure to charge the battery before using the camera. ■ SLB-1137D rechargeable battery specification Model SLB-1137D Type Lithium Ion Capacity 1100mAh Voltage 3.7V Charging time (When the camera is turned off) About 150 Min. ■ Number of images and battery life : Using the SLB-1137D Battery life / Number of images Still image << 12 >> Approx. 100 MIN / Approx.
Connecting to a Power Source You can charge the rechargeable battery (SLB-1137D) by using an SAC-47 KIT. The SAC-47 KIT consists of the AC adapter (SAC-47) and the USB cable (SUC-C4). When the AC adapter and the USB cable are assembled, it can be used as an AC cable. ● Using the SAC-47 as an AC charger : Insert the AC adapter into the USB connector. When the AC adapter is inserted, it can be used as an AC charger. In the following cases, the battery may not be charged.
Connecting to a Power Source ■ You can charge the rechargeable battery (SLB-1137D) by using the ■ Charging LED of the AC Adapter cradle. Charging LED ■ How to charge the rechargeable battery (SLB-1137D) When using the cradle Being Charged Red LED is on Charging is complete Green LED is on Charging error Red LED is off or blinking Being discharged (Using the AC adapter) Orange coloured LED is on or ● Before inserting any cables or AC adapter, check the directions and do not insert by force.
Inserting the Battery Inserting the memory card Insert the battery as shown Insert the memory card as shown. - If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ / -). - Do not use force to open the battery chamber. This may damage the battery chamber cover. - Turn off the camera’s power before inserting the memory card.
Instructions on using the memory card ● Be sure to format the memory card (see p.69) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ● Turn off the camera power whenever the memory card is being inserted or removed. ● Repeated use of the memory card will eventually reduce its performance. Should this be the case, you will need to purchase a new memory card.
Instructions on using the memory card The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards). When using a 256MB MMC memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
When Using the Camera for the First Time : Smart button This button is used for shifting the menu cursor to select or for confirming the selected menu. To select a sub menu, in some menus, touch the button and slide your finger to the left / right. 3648x2056 3072x2304 3648x2432 SIZE [Selecting the main menu : Touching the button] 3648x2736 [Confirming the main menu : Pressing the button] Slow Fast [e.g.
When Using the Camera for the First Time : Setting up the Date / Time and Language When the camera is turned on for the first time, a menu will be displayed in the AMOLED monitor to set date, time and language. This menu will not be displayed again after setting up the date, time and language. Set up the date, time and language before using this camera. ■ Setting up the date, time and date type 1. Press the [Date & Time] menu button. 2. Select a desired date type by pressing the vertical smart button.
AMOLED monitor indicator The AMOLED monitor displays information about the shooting functions and selections. 1 26 25 24 23 22 2 21 3 27 20 4 19 6 7 8 9 10 18 5 11 12 13 14 15 16 17 No. Description 9 Shooting mode Page p.36 10 Metering p.36 11 Image adjust p.37 12 Effect 13 Image quality / Frame rate 14 Self-timer 15 Voice recording / Voice memo / Without Sound Description Icons Page 1 Recording mode p.21~24 2 Photo Style Selector p.25 3 Battery p.
Starting the recording mode How to use the AUTO mode How to use the PROGRAM mode Please select this mode for quick and easy picture taking with minimal user interaction. Selecting the program mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Insert the battery (p.15) taking note of the correct polarity (+ / -). 2. Insert the memory card (p.15).
Starting the recording mode How to use the MANUAL mode How to use the DUAL IS (Dual Image Stabilization) mode The user can manually set both the aperture value and the shutter speed. This mode will reduce the effect of camera shake and help you get a well-exposed image in dim conditions. 1. Select the MANUAL mode by rotating the mode dial. 2. Select the desired shutter speed and aperture value by using the smart button. 3.
Starting the recording mode Night, Portrait scene mode How to use the SCENE mode Select a desired mode by rotating the mode dial. Use the menu to easily configure optimal settings for a variety of shooting situations. - NIGHT : Use this for shooting still images at night or in other dark conditions. - PORTRAIT : To take a picture of a person. 1. Select the SCENE mode by rotating the mode dial. 2. Select the required Scene mode by pressing the smart button. (p. 44) 3.
Starting the recording mode How to use the MOVIE mode Recording HD (High Definition) movie clips A movie clip can be recorded for as long as the available recording time (maximum of 25 minutes) of the memory capacity allows. You can record HD (High Definition) movie clips. (1280X720, 30 fps) H.264(MPEG4.AVC) is a standard for the digital video codec. It supports a high quality movie clip in a small file size.
Starting the recording mode Recording the movie clip without sound Using Photo Style Selector Mode You can record the movie clip without sound. By using the photo style selector dial located on the top of the camera, you can create photos that have various effects applied to them without using an image correction program. 1. Press the extension menu button. 2. Select the [VOICE] → [OFF] menu. 3.
Things to Watch Out for When Taking Pictures ● Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge. Press the shutter button all the way down to take the picture. [Lightly press the shutter button] [Press the shutter button] ● The available recording time may vary depending on shooting conditions and camera settings.
Using the camera buttons to set the camera The recording mode function can be set up by using the camera buttons. OIS (Optical Image Stabilization) button POWER button Minimize camera-shake during shooting by pressing the OIS button in Shooting Mode. Used for turning the camera’s power on / off. If there is no operation during the specified time, the camera’s power will be turned off automatically to save battery life. Refer to page 72 for more information about the auto power off function.
Using the camera buttons to set the camera ● If you operate OIS function using a tripod, the image can be blurred by the vibration of the sensor of the OIS. Turn off the OIS function when you use a tripod. ● If the camera is subjected to an impact the AMOLED monitor can be affected. To make the camera function properly again, turn it on and off. ● Operate the OIS function when the battery is sufficiently charged ( , ). ● If the low battery level ( ) is showing, OIS can still be set but will not work.
Using the camera buttons to set the camera ZOOM W / T button ■ WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject will appear farther away. Pressing the ZOOM W button continuously will set the camera to its minimum zoom setting i.e. the subject appears to be far from the camera.
Using the AMOLED monitor to set the camera You can use the menu on the AMOLED monitor to set up recording functions. MENU (● : Selectable, - : Partly selectable) MENU NORMAL (AF) FOCUS AUTO MACRO Page z z z z AUTO z z z z z z - z z z z z z z z RED EYE FIX SIZE FOCUS AREA z z z z z z z - z z z z z z z - SELF PORTRAIT z z z z z - z z z z METERING - z CENTER AF z CONTINUOUS z z HIGH SPEED z z MOTION CAPTURE z z z z p.
Using the AMOLED monitor to set the camera MENU z z z z z z z OFF z z z z z z z z 10SEC z z z z z z - z 2SEC z z z z z z - DOUBLE z z z z z z - REMOTE z z z z z z - z OFF z z z z z z z z MEMO z z z z z z z RECORD z z z z z z z TIMER VOICE Page z QUALITY / FRAME RATE WB z ISO z z EV z ACB z MACRO NORMAL (AF) p.39 p.40 z p.25 z z p.41 z z VOICE z p.
Flash You can select the flash type in accordance with the subject distance. The distance ranges are show below. ■ When using the [DUAL IS], [CONTINUOUS], [HIGH SPEED], [M.CAPTURE], [AEB], [MOVIE], [LANDSCAPE], [CLOSE UP], [TEXT], [SUNSET], [DAWN], [FIREWORK], [SELF SHOT], [FOOD], [CAFÉ] mode, the flash will not operate. ■ Flash range (W : Wide, T : Tele) ISO FILL IN RED EYE AUTO OFF (Unit : m) Normal Macro Auto macro W: 0.4 - 5.6 W: 0.4 - 0.8 W: 0.4 - 5.6 T: 0.5 - 2.8 T: 0.5 - 1.5 T: 0.5 - 2.
Flash Size ■ Flash mode indicator You can select the image size appropriate for your application. Icon Flash mode Description Mode Icon OFF The flash does not fire. Select this mode when capturing images in a place or situation where flash photography is prohibited. When you capture an image in a poorly lit condition, the ) will display camera shake warning indicator ( on the AMOLED monitor. AUTO If the subject or background is dark, the camera flash will operate automatically.
Focus Area You can select your preferred Focus Area according to the shooting conditions. MULTI AF CENTER AF SELF PORTRAIT FACE DETECTION [FACE DETECTION] : This mode detects the face position of the subject automatically and then sets the focus and exposure. Select this mode for quick and easy portraits. ※ Selectable modes : AUTO, PROGRAM, MANUAL, DUAL IS, PORTRAIT, SCENE (SMILE SHOT, BLINK DETECTION, CHILDREN, BEACH&SNOW, SELF SHOT, CAFÉ) 1.
Focus Area [SELF PORTRAIT] : When taking pictures of yourself, your face is automatically detected so that you can take self portraits more easily and quickly. [CENTER AF] : The rectangular area in the center of the AMOLED monitor will be focused. [MULTI AF] : This camera selects all of available AF point from the 9 AF points. ※ Selectable modes : AUTO, PROGRAM, MANUAL, DUAL IS, PORTRAIT, SCENE (SMILE SHOT, BLINK DETECTION, CHILDREN, BEACH&SNOW, SELF SHOT, CAFÉ) 1.
Continuous shot Metering You can select the type of shooting and the number of continuous shots. If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [SINGLE] : Take one picture only AEB M. CAPTURE [CONTINUOUS] : Images will be taken HIGH SPEED continuously until the shutter CONTINUOUS button is released. SINGLE The shooting capacity depends on the memory.
Image Adjust Pictures can be adjusted prior to shooting. is selected on the photo It can only be set if style selector dial. Saturation control CONTRAST You can change the saturation of the image. SATURATION SHARPNESS + direction : High saturation (The colour will be deep) - direction : Low saturation (The colour will be subtle) Sharpness Contrast You can adjust the sharpness of the picture you want to take.
Effect Quality / Frame rate By using the camera’s digital processor, it is possible to add special effects to your images. Pictures can be adjusted prior to shooting. It can only be set if is selected on the photo style selector dial. You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. BLUE SEPIA B&W NORMAL Mode Still image mode Movie clip mode Icon : No effect is added to the image.
Self-timer / Remote control This function is used when the photographer would also like to be in the picture. - Selecting a self-timer : When you press the ‘shutter’ button, the picture will be taken after the specified time has elapsed and the self-timer function will stay on.
Voice recording / Voice memo A voice can be recorded for as long as the available recording time (Max 10 hours) of the memory capacity allows. And you can add your voice-over to a stored still image. ■ Voice recording 1. Select a recording mode with the exception of the Movie clip mode by rotating the mode dial. 2. Select the Voice recording menu by using the smart button. 3. Press the shutter button to record a voice.
White balance The white balance control allows you to adjust the colours to appear more natural. When a menu except the AWB (Auto White Balance) is selected, you can only select the negative colour effect. White Balance menu is available in the Program, Manual and DUAL IS, Movie clip mode. Icon Mode AUTO DAYLIGHT Description The camera automatically selects the appropriate white balance settings, depending on the prevailing lighting conditions. For taking images outside.
ISO Exposure compensation You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated in ISO numbers. ISO menu is available in the Program and Manual mode. This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value in the compensating exposure menu. Exposure compensation menu is available in the Program and DUAL IS, Movie mode.
ACB (Auto Contrast Balance) Shutter Speed When this option is selected, the contrast is automatically adjusted. That is, when pictures are taken in backlight conditions where the exposure varies considerably or where there is wide variation in brightness, the brightness is automatically adjusted to obtain clear picture quality. This mode will set the shutter speed for automatic exposure in manual mode.
Scene menu Use the menu to easily configure optimal settings for a variety of shooting situations. Icon Scene mode SMILE SHOT*1 Description When taking a picture of smiling faces. When taking pictures by detecting blinking BLINK DETECTION*2 eyes it archives a successful shot. CHILDREN LANDSCAPE CLOSE UP TEXT SUNSET DAWN BACKLIGHT FIREWORK BEACH&SNOW << 44 >> To take a picture of fast moving objects, for example, children. To take pictures of distant scenery.
Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. ● Manner mode : To select the Manner mode, press the Play mode button for more than 3 seconds.
Starting play mode Movie clip capture function Playing back a recorded voice 1. Select the recorded voice that you want to play back by using the smart button. Capture still images from the movie clip. 1. Press the II menu button while playing back a movie file. 2. Press the Play button; menus for voice will be displayed. 2. Press the Capture menu button. The captured image is saved under a new file name. 3. Press the ※ The captured movie clip file is the same size as the original movie clip.
AMOLED monitor indicator The AMOLED monitor displays shooting information about the displayed image. a 1 2 3 4 5 6 7 8 9 0 ! @ ) ( * ISO : 160 AV : F2.8 TV : 1/40 FLASH : OFF 3648x2736 2008.01.01 Icon Page Flash ON/OFF p.32~33 10 Image size 3648x2736 ~ 320x240 p.33 11 Recording date 2008.01.01 p.70 12 Slide Bar 13 Press the smart button Edit / Play - & 14 Setup menu ^ 15 DPOF menu p.53 16 Delete menu p.52 17 Protect menu p.52 $ 18 Slide show menu p.
Using the camera buttons to adjust the camera Using the remote control in play mode In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. You can play the movie clip and images by remote control. Play mode button ■ If you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switch to Play mode and press it again to switch to Recording mode. Button for moving up : move to the previous thumbnail page.
Thumbnail ( ) / Enlargement ( ) button You can view multiple pictures, enlarge a selected picture, crop and use Image enlargement to save a selected area of an image. ■ Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by using the smart button. ■ Thumbnail display 3. Pressing the thumbnail button will zoom back to the original full sized image. 1.
Thumbnail ( ) / Enlargement ( ) button ■ Trimming : You can extract part of the image that you want and save it Playing Images separately. Images for a specific date or all images can be played. 1. Enlarge the image by using the Zoom button. To move the image, use the Smart button. 2. Press the smart button to display a confirmation window. 3. Press the [Yes] button. The trimmed image will be saved as a new file name, and appear on the AMOLED monitor.
Starting the slide show Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. To start the slide show, press the Start menu button. While the slide show is playing, the movie file and the voice recording file will not be displayed. SLIDE SHOW PLAY ■ Setting play interval Set the slide show play interval to the number of seconds preferred. 10 sec [1 sec] : Playback interval is 1 sec. [3 sec] : Playback interval is 3 sec.
Protecting images Deleting images This is used to protect (Lock) specific shots from being accidentally erased. It also unprotects (Unlocks) images that have been previously protected. This is used to delete the displayed image. [ONE] : Protect / release displayed image. [ALL] [YES] : Deletes displayed or checked ( ) image. [NO] : Cancels deleting displayed image or checked ( ) image. : Protect / release all saved images. Delete ONE ALL - The protected images can’t be deleted.
DPOF DPOF : IMAGES ■ DPOF (Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. This function allows you to embed print quantity information on a stored image. ■ The DPOF indicator will appear on the AMOLED monitor when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs.
DPOF : Print size DPOF : Index You can specify the print size when printing images stored on the memory card. The [SIZE] menu is available only for DPOF 1.1 compatible printers. Images (except for movie clips and voice file) are printed as index type. 1. Select the [INDEX] menu by pressing the smart button. ■ Setting the Print Size 2. Select a desired sub menu by pressing the smart button. 1. Select the [SIZE] menu by pressing the smart button. 2.
Rotating an image Resize You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will be saved in its rotated state. Change the resolution (size) of pictures taken. Select [START IMAGE] to save an image to be the start-up image. The resized image will have a new file name. RESIZE ROTATE 1. Press the Edit button. 1. Press the Edit button. 2. Press the [ROTATE] menu button. 2. Press the [RESIZE] menu button. 3.
Resize ● You can change the resolution of only those files compressed in the JPEG 4:2:2 format. ● The resized image will have a new file name. The [START IMAGE] image is stored not on the memory card but on the internal memory. ● Only one [START IMAGE] image can be saved. If you save a new [START IMAGE], the existing startup image will be deleted.
Special Colour Elegant 1. Press the Edit button during playback. 2. Use the Smart button to select the ( ) menu. This effect makes the photo’s colours bright and rich for an elegant feel. Colour Filter With this menu, you can change the colour information of the image (excluding Red, Blue, Green and Yellow) to Black and White. ADD NOISE ELEGANT 1. Press the [ELEGANT] menu button. ADD NOISE SHADED COLOR FILTER 2. After the message [Processing!] is displayed, the corresponding effect is applied.
Image Adjust Brightness control 1. Press the Edit button during playback. 2. Use the Smart button to select the ( ) menu. You can change the brightness of the image. SATURATION CONTRAST Red eye removal Red eye effect can be removed from the captured image. 1. Press the [BRIGHTNESS] menu button. SATURATION ACB RED EYE FIX CONTRAST BRIGHTNESS 1. Press the [RED EYE FIX] menu button. 2. Use the Smart button to adjust brightness as desired. BRIGHTNESS ACB RED EYE FIX 2.
Image Adjust Anynet+(CEC) Saturation control You can change the saturation of the image. 4. Press the Anynet+ button on the TV remote control. SATURATION 5. Playback menu appears in the TV screen when you press the menu button on the TV remote control. (Or the playback button on the camera’s remote control). CONTRAST 1. Press the [SATURATION] menu button. 2. Use the Smart button to adjust Saturation as desired. BRIGHTNESS ACB RED EYE FIX 3.
PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly Movie clips and voice files cannot be printed. ※ If you selected [Computer], when you connected the camera to your printer, the [Connecting Computer] message be displayed and the connection will not be established. Select [Printer] menu, when you connect the camera to your printer.
PictBridge ■ Custom Set You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. ※ Some menu options are not supported on all printers. If not supported, the menus are not displayed in the AMOLED. ※ If the setting values are not changed in the automatic / manual setting, the setting values are automatically kept. ■ Printing images (Custom mode) Images will be printed with changed printer setting. 1.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. ■ The items indicated by Menu tab Main menu OSD set (Recording mode) OSD set (Playback mode) Display Bright HDMI Size Start Image Sound Volume Beep Sound Shutter Sound Start Sound AF Sound << 62 >> are default settings. Sub menu Page Full Basic Func. Desc.
Setup menu Menu tab ■ How to select the setup menu Main menu Sub menu Page World time available cities Date & Time London Cape Verde Mid-Atlantic Buenos Aires Newfoundland Caracas, La Paz New York, Miami Chicago, Dallas Denver, Phoenix LA, San Francisco Alaska Honolulu, Hawaii Samoa, Midway Wellington, Auckland Okhotsk Guam, Sydney Darwin, Adelaide Seoul, Tokyo Beijing, Hong Kong Bangkok, Jakarta Yangon Almaty Kathmandu Mumbai, New Delhi Tashkent Kabul Abu Dhabi Teheran Mos
Setup menu ( ) OSD set Display Bright You can check shooting (Recording mode) and displayed image (Play back mode) information. You can adjust the AMOLED brightness. Full OSD set Basic OSD set Basic OSD set Display Bright Hide Display Bright Hide HDMI Size HDMI Size Display Save Start Image Start Image Exit:BACK [Basic] OSD set Func. Desc.
Setup menu ( ) Setup menu ( ● HDMI (High Definition Multimedia Interface) is a function that allows transferring the recorded images without compression by using the HDMI cable. You can see the images in a high resolution in the HDTV. ● When Anynet+(CEC) is used and HDMI resolution is set to [480p](NTSC) or [576p](PAL), it is only available to play back the image, movie clip, voice. ● If the selected HDMI resolution is not supported by HDTV, the clear image can not be shown in the screen.
Setup menu ( ) Setup menu ( Shutter sound File name You can select the shutter sound. - Sub menus : [Off], [Sound 1], [Sound 2], [Sound 3] This function allows the user to select the file naming format.
Setup menu ( ) Self Portrait Quick view This feature automatically detects the location of the face and optimises the camera settings to ensure a great self portrait. If you enable Quick View before capturing an image, you can view the image you just captured on the AMOLED monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. - This feature can be set by using the [Off] and [On] buttons.
Setup menu ( ) Setup menu ( ) Imprinting the recording date Copy To Card There is an option to include DATE / TIME on still images. This enables you to copy image files, movie clips and voice recording files to the memory card. - Sub menus [Off] [Date] : The DATE & TIME will not be imprinted on the image file. : Only the DATE will be imprinted on the image file. [Date&Time] : The DATE & TIME will be imprinted on the image file.
Setup menu ( ) Delete All Formatting a memory Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. [No] : Cancel the [Delete All]. [Yes] : A confirmation window will be displayed. Select the [Yes] menu by pressing the smart button.
Setup menu ( ) Language ■ World Time The date and time selected in the [Date&Time] serve as the date and time of your present location. Setting World Time enables you to display the local date and time on the AMOLED monitor when travelling overseas. There is a choice of languages that can be displayed on the AMOLED monitor. Even if the battery and AC charger are removed and inserted again, the language setting will be preserved. - LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S.
Setup menu ( ) Initialisation ■ Connecting to an external monitor All camera menu and function settings will be restored to their default values. However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be changed. - Sub menus [No] : Settings will not be restored to their defaults. [Yes] : A confirmation window will be displayed. Select the [Yes] menu by pressing the smart button. All settings will be restored to their defaults.
Setup menu ( ) - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico etc. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway etc. - When using a TV as an external monitor, you will need to select the external or AV channel of the TV. - There will be a digital noise on the external monitor, but it is not a malfunction.
Important notes Be sure to observe the following precautions! ● This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Environments where there is high magnetism or excessive vibration. - Areas with high explosives or highly flammable materials.
Important notes Warning indicator ● Camera Maintenance. There are several warnings that may appear on the AMOLED display - Use a soft brush (available from photo stores) to gently clean the lens and AMOLED assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide, thinners etc.
Warning indicator Before contacting a service centre [Low Battery!] The camera doesn’t switch on • There is low battery capacity • There is low battery capacity Insert a fully charged battery. [Low Light!] • When taking pictures in dark places Take pictures in Flash Photography mode. Insert a fully charged battery. (p.15) • Battery is inserted incorrectly with the polarities reversed. Insert the battery according to the polarity marks (+, -).
Before contacting a service centre Camera does not take images when pressing the Shutter button The flash does not fire • There is insufficient memory capacity Delete unnecessary image files. • Flash off mode has been selected • The memory card has not been formatted Format the memory card. (p.69) • The camera mode can’t use flash • The memory card is exhausted Insert a new memory card. Incorrect date and time is displayed • The memory card is locked Refer to [Card Locked!] error message.
Before contacting a service centre Specifications Image distortion appears in the picture. Image Sensor - Type : 1/2.3″ CCD - Effective Pixel : Approx. 10.20 Mega-pixel - Total Pixel : Approx. 10.30 Mega-pixel Lens - Focal Length : Schneider Lens f = 4.3 ~ 15.5mm (35mm film equivalent : 24~86.5mm) - F No. : F2.8(W) ~ F5.9(T) - Digital Zoom : · Still Image mode : 1.0X ~ 5.0X · Play mode : 1.0X ~ 11.
Specifications Flash - Modes : RED EYE FIX, SLOW SYNC, FILL IN, RED EYE, AUTO, OFF - Range : Wide : 0.4m~5.6m, Tele : 0.5m~2.8m (ISO Auto) - Recharging Time : Approx. 5 sec.
Specifications - Image Size and Capacity (256 MB Size) 3648x2736 3648x2432 3072X2304 3648x2056 2592x1944 2048x1536 1024x768 SUPER FINE 49 55 68 64 93 143 418 FINE 94 105 129 122 173 255 617 NORMAL 136 151 183 174 242 345 732 ※ These figures are measured under Samsung’s standard conditions and may vary depending on shooting conditions and camera settings. Image Play Interface Dimensions (WxHxD) - 98.5 x 61 x 18.95mm Weight - 145.
Software Notes Please ensure that you read this instruction manual carefully before use. • The attached software is a camera driver and image editing software tool for Windows. • Under no circumstances should all or part of either the software or the user manual be reproduced. • Copyrights for software are licensed only for use with a camera. • In the unlikely event of a manufacturing fault, we will repair or exchange your camera.
About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. ■ QuickTime Player 7.4 : The movie viewing program QuickTime Player is a movie viewing program and is provided for the Windows OS only. Before connecting the camera to the PC, you should first install the camera driver. ■ Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the camera driver.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. ■ You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean 1. The auto run frame will be displayed. Click the [Samsung Digital Camera Installer] menu in the Auto run frame. 2.
Setting up the application software 4. Install the QuickTime Player 7.4 in the order shown. 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn on the camera power. The [Found New Hardware Wizard] will open and the computer will recognise the camera. ※ If your OS is Windows XP / Vista, an image viewer program will open. If the download window of Samsung Master opens after starting Samsung Master, the camera driver was set up successfully.
Starting PC mode • In this mode, you can download stored images to your PC through the USB cable. • The AMOLED monitor is always turned off in PC mode. When the cradle is not used ■ Connecting the camera to a PC 1. Connect the PC to the camera with the USB cable. 2. Select the [USB]-[Computer] menu by using the smart button.
Using Removable Disk ■ Downloading stored images You can download the still images stored on the camera to your PC’s hard disk and print them or use a photo editing software to edit them. 5. Click a folder where you want to paste the file. 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 1. Connect the camera to your PC with the USB cable. 2. On your computer’s desktop display, select [My computer] and double click [Removable Disk p DCIM p 100SSCAM].
Removing the removable disk ■ Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Unplug the USB cable. ■ Windows 2000/ME/XP/Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2.
Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.2 or later. 3. Connect the camera to the Macintosh and turn the camera power on. Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1. Connect the camera to your PC and turn them on. 2.
Samsung Master You can download, view, edit and save your images and movies with this software. It does not support H.264(MPEG4.AVC) movie clip. This software is only compatible with Windows. To start the program, click [Start Programs Samsung Samsung Master Samsung Master]. ■ Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will be displayed after connecting the camera to your PC. - To download the captured images, select the [Select All] button.
Samsung Master Image viewer : You can view the stored images. Image edit : You can edit the still image. - Image viewer functions are listed below. 1 Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. 2 Image selection window : You can select the desired images in this window. 3 Media type selection menu : You can select image viewer, image edit and movie edit functions in this menu.
Samsung Master Movie edit : You can get the still image, movie clip, narration, music files together in a movie clip. ※ Some movie clips that were compressed with a codec that is not compatible with the Samsung Master can’t play back in the Samsung Master. ※ Refer to the [Help] menu in Samsung Master for further information. ※ Samsung Master does not support the playback and editing for the H.264(MPEG4.AVC) movie clip. - Movie clip edit functions are listed below.
FAQ ■ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer.
FAQ ● When you can not playback the recorded movie clip on your computer. ※ When you can not playback the recorded movie clip on your computer, it is mostly caused by the video codec installed on the computer. [How to playback the H.264(MPEG4.AVC) movie clips] • Using the QuickTime Player 7.4 Install the “QuickTime Player 7.4” provided in the CD. (The QuickTime Player 7.4 supports the H.264(MPEG4.AVC) compression for videos.) → Plays back using the “QuickTime Player 7.4”.
Correct Disposal of This Product Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
MEMO << 95 >>
