This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Keep your camera away from small children and pets. Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well.
Health and safety information Do not touch the flash while it fires. The flash is very hot when fired and may burn your skin. Caution—situations that could cause damage to your camera or other equipment When you use AC charger, turn off the camera before you disconnect the power to the AC charger. Failing to do so may result in fire or electric shock. Remove the batteries from your camera when storing it for an extended period of time.
Health and safety information Exercise caution when you connect cables or adapters and install batteries and memory cards. If you force the connectors, improperly connect cables, or improperly install batteries and memory cards, you can damage ports, connectors, and accessories. Check that the camera is operating properly before use. The manufacturer takes no responsibility for any loss of files or damages that may result from camera malfunction or improper use.
Outline of the User Manual Basic functions Copyright information • Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. • Mac is a registered trademark of the Apple Corporation. • microSD™, microSDHC™ are registered trademarks of the SD Association. • Trademarks and trade names used in this manual are the property of their respective owners. 12 Learn about your camera’s layout, icons, and basic functions for shooting.
Icons used in this manual Indicators used in this manual Shooting mode Indicator Smart Auto Program Scene Movie Icon S p s v Function Additional information Safety warnings and precautions Shooting mode icons These icons appear in the text when a function is available in a mode. See the example below. Note: The s mode may not support functions for all scenes. For example: [ ] Camera buttons. For example, [Shutter] represents the shutter button.
Expressions used in this manual Pressing the shutter • Half-press [Shutter]: press the shutter halfway down • Press [Shutter]: press the shutter all the way down Half-press [Shutter] Exposure (Brightness) The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO sensitivity. By altering the exposure, your photos will be darker or lighter.
Basic troubleshooting Learn to solve common problems by setting shooting options. The subject’s eyes appear red. • Set the flash option to Photos have dust spots. • Turn off the flash or avoid capturing photos in a dusty place. Red eye is caused by the eyes reflecting light from the camera flash. Red-eye or Red-eye Fix. (p. 51) • If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 82) If dust particles are present in the air, you may capture them in photos when you use the flash.
Quick reference Capturing photos of people s mode > Beauty Shot f 35 Self-Shot f 43 Children f 44 Red-eye/Red-eye Fix (to prevent or correct red-eye) f 51 • Face Detection f 56 • • • • Capturing photos at night or in the dark • s mode > Dawn, Night, Sunset f 34 • Flash options f 51 • ISO sensitivity (to adjust the sensitivity to light) f 52 Capturing action photos Capturing photos of text, insects, or flowers • s mode > Text f 34 • Macro f 53 Applying effects to photos • • • • s mode > Magic Frame f 34 s
Contents Basic functions ................................................................. 12 Extended functions .......................................................... 31 Unpacking ................................................................... Camera layout ............................................................. Inserting the battery and memory card ....................... Charging the battery and turning on your camera ...... Charging the battery ...........................................
Contents Using burst modes ...................................................... Applying effects/Adjusting images .............................. Applying Smart Filter effects ........................................ Adjusting your photos ................................................. Shooting options .............................................................. 47 Selecting a resolution and quality ............................... Selecting a resolution ................................................
Contents Settings ............................................................................. 94 Settings menu ............................................................. Accessing the settings menu ...................................... Sound ....................................................................... Front Display Settings ................................................. Display ...................................................................... Settings ...............................
Basic functions Learn about your camera’s layout, icons, and basic functions for shooting.
Unpacking The following items are included in your product box. Optional accessories Camera Rechargeable battery User Manual CD-ROM AC adapter/USB cable Camera case A/V cable Battery charger Memory card/Memory card adapter Strap Quick Start Manual The illustrations may differ slightly from the items shipped with your product.
Camera layout Before you start, familiarize yourself with your camera’s parts and their functions.
Camera layout Zoom button • In Shooting mode: Zoom in or out • In Playback mode: Zoom in on part of a photo or view files as thumbnails, or adjust volume Status lamp • Blinking: When the camera is saving a photo or video, being read by a computer or printer, or out of focus • Steady: When the camera is connecting to a computer or in focus Attaching the strap x y Main display Refer to the table at the bottom Button Description Button Description Access options or menus.
Inserting the battery and memory card Learn how to insert the battery and an optional memory card into the camera. Removing the battery and memory card Push the card gently until it disengages from the camera, and then pull it out of the slot. Memory card Insert a memory card with the gold-colored contacts facing up. Battery lock Memory card Insert the battery with the Samsung logo facing up. Slide the lock up to release the battery.
Charging the battery and turning on your camera Charging the battery Turning on your camera Before you use the camera for the first time, you must charge the battery. Attach the USB cable to the AC adapter, and then plug the end of cable with the indicator light into your camera. Press [POWER] to turn your camera on or off. • The initial setup screen appears when you turn on the camera for the first time. (p. 18) Turning on your camera in Playback mode Press [P].
Performing the initial setup When the initial setup screen appears, follow the steps below to configure the camera’s basic settings. 1 Press [t] to select Language, and then press [t] or [o]. 4 Press [F] or [t] to select a time zone, and then press [o]. • To set the daylight-saving time, press [D]. Time Zone London Back 2 Press [D] or [c] to select a language, and then press [o]. 3 Press [D] or [c] to select Time Zone, and then press [t] or [o].
Performing the initial setup 7 Press [D] or [c] to set the date and time, and then press [o]. 8 Press [D] or [c] to select Date Type, and then press [t] or [o]. English London Time Zone Date/Time Set Date Type Back YYYY/MM/DD MM/DD/YYYY DD/MM/YYYY Off Set 9 Press [D] or [c] to set a date format, and then press [o]. 10 Press [m] to switch to the Shooting mode.
Learning icons The icons the camera displays on the screen change according to the mode you select or the options you set.
Selecting options or menus You can select options by pressing [m], and then pressing [D], [c], [F], or [t]. Press [o] to confirm. You can also access shooting options by pressing [f], but some options may not be available. 1 2 Going back to the previous menu In Shooting mode, press [m]. Press [m] again to go back to the previous menu. Select an option or menu. • To move up or down, press [D] or [c]. • To move left or right, press [F] or [t]. 3 Half-press [Shutter] to return to the Shooting mode.
Selecting options or menus For example, selecting a White Balance option in Program mode 1 2 3 5 Press [D] or [c] to select White Balance, and then press [t] or [o]. In Shooting mode, press [M]. Select p. Photo Size Press [m]. EV Quality ISO White Balance Photo Size Shooting Quality Sound Front Display Settings EV Display White Balance Settings Smart Filter Face Detection Exit ISO 6 Smart Filter Face Detection Exit 4 Back Press [F] or [t] to select a White Balance option.
Setting the display and sound Learn how to change the basic display information and the sound settings. Setting the display type Setting the sound You can select a display type for the Shooting or Playback mode. Each type displays different shooting or playback information. See the table below. Set the sound your camera emits when you perform functions. Press [D] repeatedly to change the display type. 1 2 3 In Shooting or Playback mode, press [m]. Select Sound Beep Sound. Select an option.
Capturing photos Learn how to capture photos easily and quickly in Smart Auto mode. 1 2 3 In Shooting mode, press [M]. 4 Half-press [Shutter] to focus. • A green frame means the subject is in focus. • A red frame means the subject is out of focus. Select S. Align your subject in the frame. 5 Press [Shutter] to capture a photo. See page 29 for tips to get clearer photos.
Capturing photos Turning on the front display Icon Description The front display helps you capture self-portraits, or photos of children, or photos of people jumping. If you use the Children mode, you can play a short animation on the front display to attract a child’s attention. (p. 44) Front On: Turn on the front display. 1 Children: Show a short animation on the front display to attract the attention of children. (p. 44) In Shooting mode, press the front LCD button.
Capturing photos Digital zoom Zooming You can capture close-up photos by adjusting the zoom. Your camera has a 5X Optical zoom, 2X Intelli zoom, and 5X Digital zoom. The Intelli zoom and Digital zoom cannot be used at the same time. ps If the zoom indicator is in the digital range, your camera is using the Digital zoom. By using both the Optical zoom and Digital zoom, you can zoom in up to 25 times.
Capturing photos Intelli zoom Sps Setting Intelli zoom If the zoom indicator is in the Intelli range, your camera is using the Intelli zoom. Photo resolution varies by how much you have zoomed in if you use the Intelli zoom. By using both the Optical zoom and Intelli zoom, you can zoom in up to 10 times. 1 2 3 In Shooting mode, press [m]. Select Shooting Intelli Zoom. Select an option. Icon Photo resolution when the Intelli zoom is on Optical range Description Off: The Intelli zoom is deactivated.
Capturing photos Reducing camera shake (DIS) ps • DIS may not function properly when: - you move your camera to follow a moving subject you use the Digital zoom there is too much camera shake the shutter speed is slow (for example, when you capture night scenes) - the battery is low - you capture a close-up shot • If the camera is hit or dropped, the display will be blurry. If this occurs, turn off the camera, and then turn it on again. Reduce camera shake digitally in Shooting mode.
Tips for getting a clearer photo Holding your camera correctly Reducing camera shake Ensure nothing is blocking the lens. Set the Digital Image Stabilization option to reduce camera shake. (p. 28) When is displayed Half-pressing the shutter button Half-press [Shutter] to adjust the focus. The camera adjusts the focus and exposure automatically. The camera sets the aperture value and shutter speed automatically. Focus frame • Press [Shutter] to capture the photo if the focus frame appears in green.
Preventing your subject from being out of focus It may be difficult to get your subject in focus when: - there is little contrast between the subject and background (for example, when your subject is wearing clothing that is similar in color to the background) - the light source behind the subject is too bright - the subject is shiny or reflective - the subject includes horizontal patterns, such as blinds - the subject is not positioned in the center of the frame • When you capture photos in low light Turn
Extended functions Learn how to capture a photo, record a video, and record a voice memo by selecting a mode.
Using the Smart Auto mode In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects. The Smart Auto mode is helpful if you are not familiar with the camera settings for various scenes. 1 2 3 In Shooting mode, press [M]. Icon Description Landscapes with backlighting Select S. Portraits with backlighting Align your subject in the frame. • The camera automatically selects a scene.
Using the Smart Auto mode 4 Half-press [Shutter] to focus. • In several scenes, the camera automatically captures a photo when you half-press [Shutter]. 5 Press [Shutter] to capture the photo. • If the camera does not recognize an appropriate scene mode, it uses the default settings for the S mode. • Even if it detects a face, the camera may not select a portrait mode depending on the subject's position or lighting.
Using the Scene mode In Scene mode, you can capture a photo with options that are preset for a specific scene. 1 2 3 In Shooting mode, press [M]. Select s. Select a scene. 4 Align your subject in the frame, and then half-press [Shutter] to focus. 5 Press [Shutter] to capture the photo. Magic Frame Beauty Shot Using the Magic Frame mode Object Highlight In Magic Frame mode, you can apply various frame effects to your photos.
Using the Scene mode 5 Select an option. Using the Beauty Shot mode In Beauty Shot mode, you can capture a portrait with options to hide facial imperfections. Old Film Back 1 2 3 4 5 Move 6 Align your subject in the frame, and then half-press [Shutter] to focus. 7 Press [Shutter] to capture the photo. In Shooting mode, press [M]. Select s Beauty Shot. Press [m]. Select Shooting Face Tone. Select an option. • For example, increase the face tone setting to make skin appear lighter.
Using the Scene mode 6 7 8 Press [m]. Using the Object Highlight mode Select Shooting Face Retouch. The Object Highlight mode makes the subject more discernible by adjusting the depth of field. Select an option. 1 2 3 • For example, increase the Face Retouch setting to hide more imperfections. Level 2 In Shooting mode, press [M]. Select s Object Highlight. Position the camera according to the optimum distance displayed on the screen.
Using the Scene mode 6 Select an option to adjust Blur or Tone. • Blur: The higher the value, the more intense the blur effect in the photo. • Available resolution in Object Highlight mode is . • If the shooting distance is not within the optimum range, you can capture a photo but the Object Highlight effect will not be applied. • Tone: The higher the value, the brighter the photo. • The Object Highlight effect cannot be used in dark places.
Using the Scene mode 6 Using the Night mode In Night mode, you can use a slow shutter speed to extend the time the shutter stays open. Increase the aperture value to prevent overexposure. 1 2 3 4 5 • If you select AUTO, the aperture value or shutter speed will be adjusted automatically. 7 Align your subject in the frame, and then half-press [Shutter] to focus. 8 Press [Shutter] to capture the photo. In Shooting mode, press [M]. Select s Night. Select an option. Press [m].
Using the Program mode In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically. 1 2 3 In Shooting mode, press [M]. 4 Align your subject in the frame, and then half-press [Shutter] to focus. 5 Press [Shutter] to capture the photo. Select p. Set desired options. (For a list of options, refer to page 47.
Using the Movie mode In Movie mode, you can record high-definition videos in 1280 X 720 resolution. You can record up to 4 GB (approximately 11 minutes) at 1280 X 720 resolution and the camera saves recorded videos as MJPEG files. • Some memory cards may not support high definition recording. In this case, set a lower resolution. • Memory cards with slow writing speeds will not support high-resolution videos and high-speed videos.
Using the Movie mode Pause recording Using the Smart Scene Detection mode The camera allows you to temporarily pause a video while recording. With this function, you can record separate scenes as a single video. In Smart Scene Detection mode, your camera automatically chooses the appropriate camera settings based on the scene it has detected. 1 2 3 In Shooting mode, press [m]. Select Movie Smart Scene Detection On. Align your subject in the frame.
Using the Movie mode 4 5 Press [Shutter] to start recording. Press [Shutter] again to stop recording. • If the camera does not recognize an appropriate scene mode, it uses the default settings for the Smart Scene Detection mode. • The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, and distance to the subject. • In Smart Scene Detection mode, you cannot set smart filter effects.
Capturing photos with the front display The front display helps you capture self-portraits or photos of children. You can also use the Jump Shot Timer with the front display. Using the Self-portrait mode Capturing an Easy Self Shot Sps Conveniently capture photos of yourself with the front display. 1 2 In Shooting mode, press the front LCD button. Select Self-Shot. • Your camera will automatically detect your face and display a frame to indicate the detected face.
Capturing photos with the front display Using the Children mode Using the Jump Shot Timer Sps The Children mode attracts children by showing a short animation on the front display. 1 2 Sps Capture a photo of people jumping. An icon will appear on the front display to tell your subjects when to jump. In Shooting mode, press the front LCD button. Select Children. • The camera will display an animation. 3 4 Half-press [Shutter] to focus. Press [Shutter] to capture the photo.
Capturing photos with the front display 4 Jump when the jump icon appears on the front display. Recording a video with the front display • The camera will capture 2 photos in succession. Recording a video in Self-portrait mode 1 2 3 4 If you are capturing photos using the jump shot timer in low light conditions or indoors, photos may appear dark. In Shooting mode, press the front LCD button. Select Front On. Press [Shutter] to start recording. Press [Shutter] again to stop recording.
Recording voice memos ps Learn how to record a voice memo that you can play back later. You can also add a voice memo to a photo to remind you of shooting conditions. You will get the best sound quality when you speak 16 in (40 cm) away from the camera. Recording a voice memo Adding a voice memo to a photo 1 2 3 1 2 3 In Shooting mode, press [m]. Select Shooting Voice Record. Press [Shutter]. • Press [o] to pause or press [o] to resume.
Shooting options Learn how to set the options in Shooting mode.
Selecting a resolution and quality Learn how to change the image resolution and quality settings. Selecting a resolution Icon As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase. Description 1984 X 1488: Print on A5 paper. 1920 X 1080: Print on A5 paper in panorama ratio (16:9) or play back on an HDTV. 1024 X 768: Attach to an email.
Selecting a resolution and quality Selecting a photo quality ps The camera compresses and saves the photos you capture in the JPEG format. Higher image quality settings will result in larger file sizes. 1 2 3 In Shooting mode, press [m]. Select Shooting Quality. Select an option. Icon Description Super Fine: Capture photos in super high quality. Fine: Capture photos in high quality. Normal: Capture photos in normal quality.
Using the timer Spsv Learn how to set the timer to delay shooting. 1 3 In Shooting mode, press [t]. Press [Shutter] to start the timer. • The AF-assist light/timer lamp blinks. The camera will automatically capture a photo at the specified time. • The front display will start a countdown a few seconds before shooting. Off 2 Select an option. Icon Description Off: The timer is not active. 10 Sec: Capture a photo after a 10-second delay. 2 Sec: Capture a photo after a 2-second delay.
Shooting in the dark Learn how to capture photos at night or in low light conditions. Preventing red-eye Using the flash ps If the flash fires when you capture a photo of a person in the dark, a red glow may appear in the person’s eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to flash options in “Using the flash.” Sps Use the flash when you capture photos in the dark or when you need more light on your photos. 1 In Shooting mode, press [F]. Auto 2 Select an option.
Shooting in the dark Icon Description • Flash options are not available if you set burst options or select Slow Sync: • The flash fires and the shutter stays open longer. • This option is recommended when you want to capture ambient light to reveal more details in the background. • Use a tripod to prevent your photos from blurring. • The camera will display the shake warning when you are shooting in low light. Fill in: • The flash always fires. • The camera automatically adjusts the flash's intensity.
Changing the camera’s focus Learn how to adjust the camera’s focus to suit the subject and the shooting conditions. Using macro Using auto focus pv Use macro to capture close-up photos of subjects, such as flowers or insects. pv To capture sharp photos, select the appropriate focus according to your distance from the subject. 1 In Shooting mode, press [c]. Normal (AF) 2 Select an option. Icon • Try to hold the camera firmly to prevent blurry photos.
Changing the camera’s focus Using tracking auto focus ps • If you do not select a focus area, the focus frame will appear in the Tracking AF allows you to track and auto focus on your subject, even when you are moving. 1 2 3 center of the screen. • Tracking a subject may fail when: In Shooting mode, press [m]. Select Shooting Focus Area Tracking AF. Focus on the subject you want to track and press [o]. • • • • • The white frame means that your camera is tracking the subject.
Changing the camera’s focus Adjusting the focus area ps You can get clearer photos by selecting an appropriate focus area according to your subject’s location in the scene. 1 2 3 In Shooting mode, press [m]. Select Shooting Focus Area. Select an option. Icon Description Center AF: Focus on the center of the frame (suitable when subjects are located at or near the center). Multi AF: Focus on one or more of 9 possible areas. Tracking AF: Focus on and track the subject. (p.
Using Face Detection ps If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them. Detecting faces • The camera automatically tracks the registered face.
Using Face Detection Capturing a smile shot Detecting eye blinking The camera automatically releases the shutter when it detects a smiling face. If your camera detects closed eyes, it will automatically capture 2 photos in succession. 1 2 3 1 2 In Shooting mode, press [m]. Select Shooting Face Detection Smile Shot. In Shooting mode, press [m]. Select Shooting Face Detection Blink Detection. Compose your shot. • The camera automatically releases the shutter when it detects a smiling face.
Using Face Detection Using Smart Face Recognition • The camera may recognize and register faces incorrectly depending The camera automatically registers faces that you frequently photograph. The Smart Face Recognition feature will automatically prioritize the focus on those faces and on favorite faces. The Smart Face Recognition feature is available only when you use a memory card. on lighting conditions, drastic changes in the subject's pose or face, and whether or not the subject is wearing glasses.
Using Face Detection Registering faces as your favorites (My Star) 4 You can register your favorite faces to prioritize the focus and exposure on those faces. This feature is available only when you use a memory card. 1 2 3 When you are finished capturing the photos, the face list appears. • Your favorite faces are indicated with a on the face list. • You can register up to 8 favorite faces. • The flash will not fire when you register a favorite face.
Adjusting brightness and color Learn how to adjust the brightness and color for better image quality. Adjusting the exposure manually (EV) pv Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo. Darker (-) 1 2 Neutral (0) 3 Select a value to adjust the exposure. • The photo will be brighter as exposure increases. • When you adjust the exposure value, the icon will appear as shown below.
Adjusting brightness and color Compensating for backlighting (ACB) Changing the metering option p When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. In this case, set the Auto Contrast Balance (ACB) option. 1 2 3 In Shooting mode, press [m]. Select Shooting or Movie Metering. Select an option.
Adjusting brightness and color Selecting a light source (White balance) pv The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select a White Balance setting that is appropriate for the lighting conditions, such as Auto WB, Daylight, Cloudy, or Tungsten. 1 2 3 In Shooting mode, press [m]. Select Shooting or Movie White Balance. Select an option.
Adjusting brightness and color Defining your own White Balance You can customize the White Balance by capturing a photo of a white surface, such as a piece of paper, under the lighting conditions in which you intend to capture a photo. The White Balance feature will help your camera reproduce the colors that are in the scene accurately in your photo. 1 2 3 4 In Shooting mode, press [m]. Select Shooting or Movie White Balance. Select Measure: Shutter.
Using burst modes p It can be difficult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In these cases, select one of the burst modes to rapidly capture multiple photos. Icon Description Motion Capture: While you are pressing [Shutter], the camera captures VGA photos (6 photos per second; maximum of 30 photos). 1 2 3 AEB: • Capture 3 consecutive photos, each with a different exposure: normal, underexposed, and overexposed.
Applying effects/Adjusting images Applying Smart Filter effects Available filters in Program mode pv Apply various filter effects to your photos and videos to create unique images. Icon Description Normal: No effect Miniature: Apply a tilt-shift effect to make the subject appear in miniature. Vignetting: Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras. Half Tone Dot: Apply a halftone effect. Miniature Vignetting Sketch: Apply a pen sketch effect.
Applying effects/Adjusting images Available filters in Movie mode Icon Icon Description Description Classic: Apply a black and white effect. Normal: No effect Retro: Apply a sepia tone effect. Palette Effect 1: Create a vivid look with sharp contrast and strong color. Negative: Apply a negative film effect. Palette Effect 2: Make scenes clean and clear. Custom RGB: Customize a color value. Palette Effect 3: Apply a soft brown tone. Palette Effect 4: Create a cold and monotone effect.
Applying effects/Adjusting images Defining your own RGB tone 1 2 3 4 the video will increase. In Shooting mode, press [m]. • If you select Miniature when you are recording a video, the camera Select Shooting or Movie Smart Filter. • If you select a Miniature, Vignetting, Fish-eye, or Defog while recording will not record sound. a video, the recording speed will be set to and the recording resolution will be set to less than .
Applying effects/Adjusting images Adjusting your photos p Saturation Description Adjust the sharpness, saturation, or contrast of your photos. - Decrease the saturation. 1 2 3 + Increase the saturation. In Shooting mode, press [m]. Select Shooting Image Adjust. • Select 0 if you do not want to apply any effects (suitable for printing). • If you set any adjustment functions, you cannot use the Face Select an option. Recognition and Smart Filter options.
Playback/Editing Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, or TV.
Viewing photos or videos in Playback mode Learn how to play back photos, videos, or voice memos and how to manage files. Photo file information Starting Playback mode View photos or play videos and voice memos stored in your camera. 1 Press [P]. • The most recent file will be displayed. • If the camera is off, it will turn on and display the most recent File Information file. 2 Press [F] or [t] to scroll through files. Play • Press and hold [F] or [t] to scroll through files quickly.
Viewing photos or videos in Playback mode Video file information Ranking your favorite faces You can rank your favorite faces. The favorite face feature is available only when you insert a memory card into the camera. 1 2 3 Select File Options Face List Edit Edit Ranking. Select a face from the list, and then press [o]. Capture Play Icon In Playback mode, press [m].
Viewing photos or videos in Playback mode Canceling your favorite faces Viewing files by category in Smart Album You can delete your favorite faces. The favorite face feature is available only when you insert a memory card into the camera. 1 2 3 4 5 In Playback mode, press [m]. Select File Options Face List Edit Delete. Select a face, and then press [o]. View files by category, such as date, face, or file type. 1 2 3 In Playback mode, push [Zoom] down. Press [m]. Select a category. Press [f].
Viewing photos or videos in Playback mode 4 Viewing files as thumbnails Press [F] or [t] to scroll through files. • Press and hold [F] or [t] to scroll through files quickly. 5 Scan thumbnails of files. Press [o] to return to the normal view. In Playback mode, push [Zoom] down to view thumbnails (9 at a time). Push [Zoom] down once or twice more to display more thumbnails (20 at a time). Push [Zoom] up to return to the previous view.
Viewing photos or videos in Playback mode Protecting files Deleting files Protect your files from accidental deletion. Select files to delete in Playback mode. 1 2 Deleting a single file You can select one file, and then delete it. In Playback mode, press [m]. Select File Options Protect Select. • To protect all files, select All Lock. 3 Select the file you want to protect, and then press [o]. • Press [o] again to cancel your selection.
Viewing photos or videos in Playback mode Deleting all files You can select all files, and then delete them at once. 1 2 3 In Playback mode, press [m]. Viewing photos Enlarge part of a photo or view photos as a slide show. Enlarging a photo Select File Options Delete All. When the pop-up message appears, select Yes. In Playback mode, push [Zoom] up to enlarge a portion of the photo. Push [Zoom] down to zoom out. Copying files to a memory card Copy files from the internal memory to a memory card.
Viewing photos or videos in Playback mode 3 To Description Move the enlarged area Press [D], [c], [F], or [t]. Trim the enlarged photo Press [o] (it will be saved as a new file). Select a slide show effect option. • Skip to step 4 to start a slide show with no effects. When you view photos that were captured by another camera, the zoom ratio may differ. * Default Option Description Start To start the slide show. You can select single play or repeat.
Viewing photos or videos in Playback mode 4 5 Select Start Play. Playing a video • Select Repeat to loop the slide show. In Playback mode, you can view a video, and then capture parts of the playing video. You can save the captured segments as new files. View the slide show. • Press [o] to pause the slide show. • Press [o] again to resume the slide show. Press [o], and then press [F] or [t] to stop the slide show and switch to Playback mode. 1 2 In Playback mode, select a video, and then press [o].
Viewing photos or videos in Playback mode Capturing an image from video Playing a voice memo 1 While viewing a video, press [o] at the point where you want to capture an image. 2 Press [c]. • The resolution of the captured image will be the same as the original video. • The captured image is saved as a new file. Listening to a voice memo 1 In Playback mode, select a voice memo, and then press [o]. 2 Listen to the voice memo. To Description Scan backward Press [F].
Viewing photos or videos in Playback mode Adding a voice memo to a photo 1 In Playback mode, select a photo, and then press [m]. 2 3 Select File Options Voice Memo On. Press [Shutter] to record a short voice memo. • Maximum recording time is 10 seconds. • Press [Shutter] to stop recording a voice memo. Playing voice memos that are attached to photos 1 In Playback mode, select a photo that includes a voice memo, and then press [o]. 2 Listen to a voice memo. • Press [o] to pause playback.
Editing a photo Learn how to edit photos. • The camera will save edited photos as new files. Rotated photos overwrite the original files. • When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to a lower resolution. Rotated photos overwrite the original files. Resizing photos Rotating a photo Change the size of a photo and save it as a new file.
Editing a photo Applying Smart Filter effects Icon 1 In Playback mode, select a photo, and then press [m]. 2 3 Select Edit Smart Filter. Description Soft-Focus: Hide facial imperfections or apply dreamy effects. Apply special effects to your photos. Old Film 1: Apply a vintage film effect 1. Old Film 2: Apply a vintage film effect 2. Half Tone Dot: Apply a halftone effect. Select an effect. Sketch: Apply a pen sketch effect.
Editing a photo Defining your own RGB tone 1 In Playback mode, select a photo, and then press [m]. 2 3 4 Select Edit Smart Filter. Select Custom RGB. Select a color (R: Red, G: Green, B: Blue). Adjusting your photos Learn how to adjust the brightness, contrast, or saturation and how to correct the red-eye effect. If the center of a photo is dark, you can adjust it to be brighter. The camera will save an edited photo as a new file, but may convert it to a lower resolution.
Editing a photo Retouching faces Adjusting brightness, contrast, or saturation 1 In Playback mode, select a photo, and then press [m]. 1 In Playback mode, select a photo, and then press [m]. 2 3 Select Edit Image Adjust Face Retouch. 2 3 Select Edit Image Adjust. Select a level. • As the number increases, the skin tone becomes brighter. 4 Select an adjusting option. Icon Description Brightness Press [o] to save. Contrast Saturation 4 5 Adjust the option. Press [o] to save.
Editing a photo 5 Adding noise to the photo Select File Options DPOF Size Select. • Select All to choose the print size for all photos. 1 In Playback mode, select a photo, and then press [m]. 2 3 Select Edit Image Adjust Add Noise. 6 Select a photo to print, push [Zoom] up or down to select the print size, and then press [f]. • If you select All, press [D] or [c] to select the print size, and then press [o]. Press [o] to save.
Editing a photo Printing photos as thumbnails Print photos as thumbnails to check all the photos at once. 1 2 3 In Playback mode, press [m]. Select File Options DPOF Index. When the pop-up message appears, select Yes. • You can take the memory card to a print shop that supports DPOF (Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home. • Photos with dimensions that are wider than the paper may be cut off on the left and right edges.
Viewing files on a TV Play back photos or videos by connecting your camera to a TV with the A/V cable. 1 2 3 4 5 In Shooting or Playback mode, press [m]. Select Settings Video Out. Select the appropriate video signal output for your country or region. (p. 99) 6 Turn on your TV, and then select a video output mode with the TV remote control. 7 8 Turn on your camera. View photos or play videos using the camera buttons. Turn off your camera and TV.
Transferring files to your Windows computer Transfer files to your Windows computer, edit them with Intelli-studio, and upload them to the web. Requirements • The requirements are recommendation only. It may not work properly Item Requirements CPU Intel Pentium 4, 3.2 GHz or higher/ AMD Athlon™ FX 2.
Transferring files to your Windows computer 5 Transferring files with Intelli-studio Turn on the camera. • The computer recognizes the camera automatically and Intelli-studio will start automatically when you connect the camera to your computer with the USB cable. Intelli-studio launches automatically. If you set the USB option to Select Mode, select Computer in the pop-up window. The battery will charge while the camera is connected to a computer with the USB cable.
Transferring files to your Windows computer Using Intelli-studio Intelli-studio is a built-in program that allows you to play back and edit files. For details, select Help Help from the program toolbar. • To enjoy more features, such as creating slide shows with templates, install the full version of Intelli-studio by selecting Web Support Update Intelli-studio Start Update from the program toolbar.
Transferring files to your Windows computer 1 Open menus. Transferring files by connecting the camera as a removable disk 2 Display files in the selected folder. Connect the camera to your computer as a removable disk. 3 Switch to the Photo edit mode. 4 Switch to the Video edit mode. 5 Switch to the Sharing mode (to send files by email or upload files to websites, such as Flickr or YouTube). 6 Download short animations for use in Children mode. 7 Enlarge or reduce the thumbnails in the list.
Transferring files to your Windows computer 5 Turn on the camera. Disconnecting the camera (for Windows XP) • The computer recognizes the camera automatically. With Windows Vista and Windows 7, the methods for disconnecting the camera are similar. If you set the USB option to Select Mode, select Computer in the pop-up window. 6 On your computer, select My Computer Removable Disk DCIM 100PHOTO. 7 Drag or save files to your computer.
Transferring files to your Mac computer When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer files directly from the camera to the computer without installing any programs. Mac OS 10.4 or later is supported. 1 Connect your camera to a Macintosh computer with the USB cable. 2 Turn on the camera. • The computer recognizes the camera automatically and displays a removable disk icon.
Printing photos with a PictBridge photo printer Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer. 1 2 3 Configuring print settings In Shooting or Playback mode, press [m]. Select Settings USB Printer. Press [m] to configure print settings. Turn on the printer, and then connect your camera to the printer with the USB cable.
Settings Refer to options to configure your camera’s settings.
Settings menu Learn to configure your camera's settings. 3 Accessing the settings menu 1 2 In Shooting or Playback mode, press [m]. Select an item. Volume Select a menu. Start Sound Medium Off Shutter Sound 1 Beep Sound 1 On AF Sound Shooting Volume Sound Front Display Settings Display Start Sound Shutter Sound Exit Beep Sound AF Sound 4 Settings Exit Select an option. Change Volume Option Sound Back Start Sound Description Shutter Sound Set various camera sounds and the volume.
Settings menu Sound Front Display Settings * Default * Default Item Description Item Volume Set the volume of any sound. (Off, Low, Medium*, High) Front Smile Shot when it detects a smiling face in Self Shot mode. Start Sound Set the sound the camera emits when you turn on your camera. (Off*, 1, 2, 3) Shutter Sound Set the sound the camera emits when you press the shutter button. (Off, 1*, 2, 3) Beep Sound Set the sound the camera emits when you press the buttons or switch modes.
Settings menu Display * Default * Default Item Description Item Description Function Description Display a brief description of an option or menu. (Off, On*) Quick View Start Image Set a start image to display when the camera turns on. • Off*: Display no start image. • Logo: Display a default image stored in the internal memory. • User Image: Display a custom image. (p. 80) Set the duration for reviewing a captured image before returning to the Shooting mode. (Off, 0.
Settings menu Settings * Default Item Description * Default Item Format the internal memory and the memory card Formatting will delete all files, including protected files. (Yes, No) Format Reset Specify how to name files. • Reset: Set the file number to start from 0001 when you insert a new memory card, format a memory card, or delete all files. • Series*: Set the file number to resume from the previous file number when you insert a new memory card, format a memory card, or delete all files.
Settings menu * Default Item Description * Default Item Description Video Out Set the video signal output for your region. • NTSC*: USA, Canada, Japan, Korea, Taiwan, Mexico • PAL (supports only BDGHI): Australia, Austria, Belgium, China, Denmark, England, Finland, Germany, Italy, Kuwait, Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain, Sweden, Switzerland, Thailand AF Lamp Set a light to turn on automatically in dark places to help the camera focus.
Appendixes Get information about error messages, specifications, and maintenance.
Error messages When the following error messages appear, try these remedies. Error message Suggested remedies • Turn off your camera, and then turn it on again. Card Error • Remove your memory card, and then insert it again. • Format your memory card. Card not supported. The inserted memory card is not supported by your camera. Insert a microSD or microSDHC memory card. DCF Full Error File names do not match the DCF standard.
Camera maintenance Camera body Cleaning your camera Wipe gently with a soft, dry cloth. Camera lens and display Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe gently. • Never use benzene, thinners, or alcohol to clean the device. These solutions can damage the camera or cause it to malfunction. • Do not press on the lens cover or use a blower brush on the lens cover.
Camera maintenance Using on beaches or shores Using or storing the camera • Protect your camera from sand and dirt when you use it on beaches or in other similar areas. Inappropriate places to use or store the camera • Your camera is not waterproof. Do not handle the battery, • Avoid exposing the camera to very cold or very hot temperatures. • Avoid using your camera in areas with extremely high humidity, adapter, or memory card with wet hands.
Camera maintenance • Paint or metal on the outside of the camera may cause Other cautions • Do not swing your camera by the strap. This may cause injury • • • • • • • • • to yourself or others or damage to your camera. Do not paint your camera, as paint can clog moving parts and prevent proper operation. Turn off the camera while not in use. Your camera consists of delicate parts. Avoid impacts to the camera. Protect the display from external force by keeping it in the case when not in use.
Camera maintenance Memory card capacity Cautions when using memory cards The memory capacity may differ from the the capacities listed below depending on the scenes you shoot or the shooting conditions.
Camera maintenance • When you carry a memory card, use a case to protect the card from electrostatic discharges. • Transfer important data to other media, such as a hard disk, CD, or DVD. • When you use the camera for an extended period, the memory card may become warm. This is normal and does not indicate a malfunction. The manufacturer is not responsible for any loss of data.
Camera maintenance Cautions about using the battery Low battery message When the battery charge has fully discharged, the battery icon will turn red and the "Low Battery" message will appear. Notes about using the battery • Avoid exposing batteries or memory cards to very cold or very • • • • hot temperatures (below 0 ºC/32 ºF or above 40 ºC/104 ºF). Extreme temperatures can reduce the charging capacity of your batteries and can cause memory cards to malfunction.
Camera maintenance • Using the flash or recording videos depletes the battery quickly. • • • • Charge the battery until the indicator light turns green. If the indicator light blinks in orange or does not illuminate, reconnect the cable, or remove the battery and insert it again. If you charge the battery when the cable is overheated or the temperature is too high, the indicator light may turn orange. Charging will start when the battery cools down. Overcharging batteries may shorten battery life.
Camera maintenance Personal injury or death can occur if the battery is handled carelessly or improperly. For your safety, follow these instructions for proper battery handling: • The battery can ignite or explode if not handled properly. If you notice any deformities, cracks, or other abnormalities in the battery, immediately discontinue use of the battery and contact a service center.
Before contacting a service center If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still having problems with your device, contact your local dealer or service center. When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Before contacting a service center Situation Suggested remedies The flash fires unexpectedly The flash may fire due to static electricity. The camera is not malfunctioning. Situation The date and time are incorrect Set the date and time in the display settings. (p. 98) is suitable for close-up shots. (p. 53) Remove the battery and insert it again. The camera display responds poorly If you use your camera at very low temperatures, it may cause the camera screen to malfunction or discolor.
Before contacting a service center Situation Suggested remedies Situation • Make sure that the camera is correctly The TV does not display your photos connected to the TV with the A/V cable. • You cannot use Intelli-studio on • Make sure that your memory card Macintosh computers. contains photos. • Make sure that PC Software is turned • Make sure that the USB cable is Your computer does not recognize your camera Suggested remedies • End Intelli-studio and restart the program.
Camera specifications Image sensor Focusing Type 1/2.3" (Approximately 7.76 mm) CCD Effective pixels Approximately 14.2 mega-pixels Total pixels Approximately 14.4 mega-pixels Type Range Lens Focal length Samsung Lens f = 4.7 mm-23.5 mm (35 mm film equivalent: 26 mm-130 mm) F-stop range F3.3 (W)-F5.9 (T) Digital zoom • Still image mode: 1.0X-5.0X (Optical zoom X Digital zoom: 25.0X) • Playback mode: 1.0X-13.
Camera specifications Flash Date Imprinting Mode Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix Date & Time, Date, Off Range • Wide: 0.2 m-3.4 m (ISO Auto) • Tele: 1.0 m-1.9 m (ISO Auto) Shooting Recharging time Approximately 4 sec.
Camera specifications Playback Type Single image, Thumbnails, Multi Slide Show with Music and Effect, Movie clip, Smart Album* * Smart Album category: Type, Date, Color, Week, Face Edit Resize, Rotate, Image Adjust, Smart Filter, Trim Effect • Image Adjust: Red-eye Fix, ACB, Face Retouch, Brightness, Contrast, Saturation, Add Noise • Smart Filter: Normal, Miniature, Vignetting, SoftFocus, Old Film 1, Old Film 2, Half Tone Dot, Sketch, Fish-eye, Defog, Classic, Retro, Negative, Custom RGB File format
Camera specifications Interface Digital output connector Operating Temperature 0-40° C / 32-104° F USB 2.0 Operating Humidity Audio input/output Internal speaker (Mono), Microphone (Mono) Video output A/V: NTSC, PAL (selectable) DC power input connector 20 pin, 4.2 V 5-85 % Software Intelli-studio Specifications may change without notice to improve performance. Power source Rechargeable battery Lithium-ion battery (BP70A, 740 mAh: Min 700 mAh) The power source may differ depending on your region.
Glossary ACB (Auto Contrast Balance) This feature automatically improves the contrast of your images when the subject is backlit or when there is a high contrast between your subject and the background. Composition Composition in photography means arranging objects in a photo. Usually, abiding by the rule of thirds leads to a good composition.
Glossary EV (Exposure Value) All the combinations of the camera’s shutter speed and lens aperture that result in the same exposure. EV Compensation This feature allows you to quickly adjust the exposure value measured by the camera, in limited increments, to improve the exposure of your photos. Set the EV compensation to -1.0 EV to adjust the value one step darker and 1.0 EV to one step brighter.
Glossary LCD (Liquid Crystal Display) A visual display commonly used in consumer electronics. This display needs a separate backlight, such as CCFL or LED, to reproduce colors. Optical zoom This is a general zoom which can enlarge images with a lens and does not degrade image quality. Macro This feature allows you to capture close-up photos of very small objects. When using the macro feature, the camera can maintain a sharp focus on small objects at a near life-size ratio (1:1).
Glossary Vignetting A reduction of an image’s brightness or saturation at the periphery (outer edges) compared to the center of the image. Vignetting can draw interest to subjects positioned in the center of an image. White balance (color balance) An adjustment of the intensities of colors (typically the primary colors red, green, and blue), in an image. The goal of adjusting the white balance, or color balance, is to correctly render the colors in an image.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
FCC notice • NOTE: • Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Index A AF-assist light location 14 settings 99 AF Sound 96 Aperture value 38 Brightness Connecting to a computer Playback mode 83 Shooting mode 60 Mac 92 Windows 87 Burst modes Contrast Auto Exposure Bracket 64 Continuous 64 Motion Capture 64 C Date/Time set 98 Camera maintenance 102 Deleting files 73 Auto Exposure Bracket (AEB) 64 Camera specifications 113 A/V port 14 Charging 17 Digital Image Stabilization (DIS) 28 Children mode Digital Print Order Format 84 B Battery caution 107 chargi
Index H Intelli zoom 27 Motion Capture 64 Printing photos 93 Half-press shutter 29 ISO sensitivity 52 My star Program mode 39 cancelling 72 ranking 71 registering 59 J I Icons Playback mode 70 Shooting mode 20 Image Adjustment Add Noise 84 Brightness Playback mode 83 Shooting mode 60 Contrast Playback mode 83 Shooting mode 68 Red-eye 82 Saturation Playback mode 83 Shooting mode 68 Sharpness 68 Image quality 49 Imprint 99 Intelli-studio 89 Q Jump shot 44 N L Protecting files 74 Quick view
Index S Saturation Playback mode 83 Shooting mode 68 Scene mode 34 Smart Album 72 Mac 92 Windows 87 Smart Auto mode 32 Smart Face Recognition 58 Tripod mount 14 Smart Filter Playback mode 81 Shooting mode 65 Self portrait mode 43 photo 43 video 45 Transferring files U Unpacking 13 Smart Scene Detection mode 41 USB port 14 Service center 110 Smile Shot 57 Settings 98 Sound settings 23 V Sharpness 68 Start Image 97 Video Shooting portraits Status lamp 15 Beauty Shot mode 35 Blink Detecti
Please refer to the warranty that came with your product or visit our website http://www.samsung.com/ for after-sales service or inquiries.
