User Manual (ver.1.0)

Shooting options 38
Using the timer
6
Pose for your photo while the AF-assist light/timer lamp
is blinking.
• The AF-assist light/timer lamp stops blinking just before the
camera automatically takes a photo.
The motion timer may not work when:
• you are more than 10 ft. (3 m) away from the camera
• your movements are too subtle
• there is too much light or backlight
Using the motion timer
1
In Shooting mode, press [ ].
2
Select .
3
Press [Shutter].
4
Stand within 10 ft. (3 m) of the camera within 6 seconds
after pressing [Shutter].
5
Make a motion, such as waving your arms, to activate
the timer.
• The AF-assist light/timer lamp starts to blink rapidly when the
camera detects you.
The detection range of
the motion timer