Instructions Getting to know your camera Use this camera in the following order. Set up the Software Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. (p.86~88) Thank you for buying a Samsung Digital Camera.
DANGER WARNING DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. z z z z z Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera.
CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. z z z z z z z z z Leaking, overheating, or burst battery could result in fire or injury. – Use battery with the correct specification for the camera. – Do not short circuit, heat or dispose of battery in fire. – Do not insert the battery with the polarities reversed. Remove the battery when not planning to use the camera for a long period of time.
Contents 026 027 028 028 030 030 032 034 036 036 Things to watch out for when taking pictures Focus lock Using the camera buttons to set the camera POWER button Shutter button ZOOM W / T button Function Description / Info / Up button Macro / Down button Flash / Left button Self-timer / Right button MENU / OK button Fn button 037 038 038 039 039 040 041 041 041 042 042 043 Fn button: Size Fn button: Quality / Frame rate Fn button: Metering Fn button: Drive mode Fn button: ISO Fn button: White balance Fn
Contents 058 058 058 059 060 060 061 061 061 062 062 062 062 SETUP 063 Left / Right / Menu / OK button Print button Delete button E (Effect) button: Resize E (Effect) button: Rotating an image E (Effect) button: Colour E (Effect) button: Image editing ACB Red eye removal Face Retouch Brightness control Contrast control Saturation control 064 Setting up the play back function using the LCD monitor Starting the slide show 067 Playback 064 065 065 066 066 067 067 068 068 071 072 Sound menu Sound 07
Contents SOFTWARE 084 084 085 086 089 091 092 095 095 Software notes System requirements About the software Setting up the application software Starting PC mode Removing the removable disk Samsung Master Setting up the USB Driver for MAC Using the USB Driver for MAC APPENDIX 096 098 100 101 103 105 106 Specifications Important notes Warning indicator Before contacting a service centre FAQ Correct Disposal of This Product Correct disposal of batteries in this product 006
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Package Contents Camera User manual (AD68-03145A), Product warranty Camera strap (Silver: AD63-02596A/ Black: AD63-02604A) Rechargeable battery (SLB-10A) (4302-001221) AC adapter (SAC-47) (AD44-00131A)/ USB cable (SUC-C3) (AD39-00147A) Software CD (see p.
Identification of features Front & Top Mode dial Speaker Shutter button POWER button AF sensor/ Self-timer lamp Flash Microphone Lens 008
Identification of features Back Zoom T button (Digital zoom) Zoom W button (Thumbnail) Camera status lamp LCD monitor Camera strap E (Effect) button Open Fn / Delete button 5-function button Close Play mode / Print button USB / AV / DC terminal OIS button 009
Identification of features Bottom 5 Function button Battery chamber Function Description/Information/Up button Flash/ Left button Self-timer/ Right button MENU/OK button Battery holder Battery chamber cover Tripod socket 010 Memory card slot Macro/Play & Pause/ Down button
Identification of features Self-timer lamp Icon Status Description Blinking – For the first 8 seconds, the lamp blinks at 1 second intervals. – For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking For the final 2 seconds, the lamp blinks quickly at 0.25-second intervals. Blinking A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
Connecting to a power source You should use the rechargeable battery SLB-10A supplied with the camera. Be sure to charge the battery before using the camera. SLB-10A rechargeable battery Specification Movie Model SLB-10A Type Lithium Ion Capacity 1050mAh Voltage 3.7V Charging time (When the camera is turned off) Approx. 150MIN ½ ½ Number of images and battery life: Using the SLB-10A Still image 012 Battery life /Number of images Conditions Approx. 120 MIN/ Approx.
Connecting to a power source You can charge the rechargeable battery (SLB-10A) by using the SAC-47 KIT which consists of the AC adapter (SAC-47) and the USB cable (SUC-C3). When the SAC-47 and SUC-C3 are combined, they can be used as an AC cable. z Using an AC cable: Connect the AC adapter (SAC-47) to the USB cable. It can be used as a power cable. z Using a USB cable: Remove the AC adapter (SAC-47). You can download stored images to your PC (p.
Connecting to a power source How to charge the rechargeable battery (SLB-10A) Charging LED of the AC Adapter Charging LED 014 Before inserting any cables or AC adapter, check the directions and do not insert using force. It may cause breakage of cable or camera. If the charging LED of the AC Charger does not turn on or blink after inserting the rechargeable battery, please check whether the battery is inserted correctly.
Inserting the battery Inserting the memory card Insert the battery as shown. Insert the memory card as shown. – If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+/-). – When the battery chamber cover is opened, do not force it. This may cause damage to the battery chamber cover. - Turn off the camera’s power before inserting the memory card.
Instructions on how to use the memory card z z z z z z z z z z z Be sure to format the memory card (see p.77) if you are using a newly purchased memory card for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance.
Instructions on how to use the memory card The camera can use SD/ SDHC Memory Cards and MMC (Multi Media Cards). When using a 1GB SD memory, the specified shooting capacity will be as follows. These figures are approximate as image capacities can be affected by variables such as subject matter and memory card type.
When using the camera for the first time z z Charge the rechargeable battery fully before using the camera for the first time. When the camera is turned on for the first time, a menu will be displayed in the LCD monitor to set date, time and language. This menu will not be displayed again after setting up the date, time and language. Set up the date, time and language before using this camera. Setting up the language Setting up the date, time and date type 1.
LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. 1 2 00005 X5.0 ) ( * F 2.8 e 1/20 & $ 7 Metering/Stabiliser 4 8 Drive mode p.39 5 9 ISO p.39 10 White Balance p.40 11 Exposure compensation 12 Date/Time 13 Saturation 14 Sharpness/Mic. off 0 15 Contrast p.44 ! 16 Macro p.30~31 17 Self-timer p.34~35 18 Flash p.32~33 19 Face Detection · Self Portrait · Smile Shot · Blink Detection /Colour p.46~47/ p.
Starting the Recording mode Selecting modes How to use the Auto mode You can select the shooting modes by using the mode dial on the upper of your camera. Select this mode for quick and easy picture taking with minimal user interaction. How to use the mode dial Select the shooting mode by turning the mode dial to the selection point. Scene mode Movie Clip mode Beauty Shot mode Select point Photo help guide mode Auto mode DUAL IS(Dual Image Stabilization) mode Program mode 1.
Starting the Recording mode How to use the Program mode How to use the DUAL IS(Dual Image Stabilization) mode Selecting the automatic mode will configure the camera with optimal settings and you can manually configure various functions. This mode will reduce the effect of camera shake and help you get a well exposed image in dim conditions. 1. Select the Program mode by using the Mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3.
Starting the Recording mode Using the Photo Help guide mode Available functions of the photo help guide z Function that can be used when focusing is difficult z Function that can be used when the image is blurred z Function that can be used when filming in the dark z Function that can be used when adjusting the picture brightness z Function that can be used when adjusting the picture colour Helps the user learn the correct picture taking method and includes solutions for potential problems that may occur.
Starting the Recording mode How to use the Beauty Shot mode How to use the Scene modes Take a photo of portraits by setting options to clear facial imperfections. Use the menu to easily configure optimal settings for a variety of shooting situations. (p. 51) 1. Select the Beauty Shot mode by using the Mode dial. (p.20) 00005 1. Select the Scene mode by using the Mode dial. (p.20) 2. Point the camera towards the subject and compose the image by using the LCD monitor. 3.
Starting the Recording mode How to use the Movie clip mode The scene modes are listed below. (p.51) Icons Scene modes Nightscene Use this for shooting still images at night or in other dark conditions. Portrait Selecting the portrait mode will confi gure the camera with optimal settings for portrait photography. Children To take a picture of fast moving objects, for example, children. Landscape Close up Text A movie clip can be recorded for up to 2hours.
Starting the Recording mode Recording the movie clip without sound Pausing while recording a movie clip (Successive Recording) You can record the movie clip without sound. This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips. Steps from 1-3 are the same as those for Movie clip mode. 4. Press the MENU button. 5.
Things to watch out for when taking pictures z Pressing the Shutter button down half way. Lightly press the Shutter button to confirm focus and flash battery charge. Press the Shutter button all way down to take the picture. z z z The available memory capacity may vary depending on shooting conditions and camera settings.
Focus lock To focus on a subject not positioned in the centre of the picture, use the focus lock function. The recording mode function can be set up by using the camera buttons. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the Shutter button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject. Be careful not to press the Shutter button all the way down to avoid taking an unwanted picture. 3.
Shutter button ZOOM W / T button Used for taking an image or recording voice in the Recording mode. If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. This camera has a 3.6X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 18X. z z In Movie clip mode Pressing the Shutter button down fully starts the process for recording a movie clip.
ZOOM W / T button WIDE Zoom z Optical zoom WIDE: Pressing the Zoom W button. This will zoom out from the subject i.e. the subject will appear further away. Pressing the Zoom W button continuously will set the camera to its minimum zoom setting i.e. the subject appears at its furthest from the camera.
Function Description / Info ( ) / Up button While the menu is showing, the Up button operates as a direction button. If the menu screen does not appear, information or function descriptions of the current filming image (filming mode) can be accessed through the liquid crystal monitor by pressing the Function description / Information ( ) button.
Macro ( ) / Down button Types of focus mode and focus range (W: Wide, T: Tele) (Unit: cm) Available focusing method, by Recording mode (z: Selectable, ∞: Infinity focus range) Mode Focus Type Focus range Auto ( Auto macro ( W: 5 ~ Infinity T: 50 ~ Infinity Focus range Mode Focus Type Focus range Normal ) W: 5 ~ 80 T: 50 ~ 80 DUAL IS mode ( Auto macro ( W: 5 ~ Infinity T: 50 ~ Infinity Auto macro ) Macro z W: 80 ~ Infinity T: 80 ~ Infinity Program ( Macro ( Mode ) Mode Focus Type ) )
Flash ( ) / Left button When the menu is displayed on the LCD monitor, pressing the Left button makes the cursor shift to the left tab. z When the menu is not displayed on the LCD monitor, the Left button operates as the Flash( ) button. z z Selecting the flash mode 1. Select a desired Recording mode, except the [Movie] mode and the [DUAL IS] mode. (p.20) 2. Press the Flash button until the desired flash mode indicator is displayed on the LCD monitor. 3.
Flash ( ) / Left button Flash mode indicator Icon Flash mode Auto flash Auto & Red eye reduction Fill in flash (z: Selectable) Description If the subject or background is dark, the camera flash will operate automatically. If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function. z z z z z Slow synchro Flash off The flash does not fire.
Self-timer ( ) / Right button When the menu is displayed on the LCD monitor, pressing the Self-timer ( ) / Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the Self-timer ( ) / Right button operates as the Self-timer ( ) button. This function is used when the photographer would also like to be in the image. z z z z 034 If you operate the Self-timer( ) button during the self-timer operation, the self-timer function is cancelled.
Self-timer ( ) / Right button Motion Timer Motion Icon & Self-timer lamp Pressing the Shutter button after setting the Motion Timer Blink (1 second interval) Detecting the subject’s movement Blink (0.25 second interval) No movement is detected Turn on and the image is taken after 2 seconds. The Motion Timer flows are as follows. (Movie Clip mode excluded) Selecting the Motion Timer l Pressing the Shutter button l Confirming the composition (Within 6 sec.
MENU / OK button Fn button MENU button You can use the Fn button to set the following menus. – When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. – A menu option can be displayed when the following are selected: [Movie], [Auto], [Program], [Manual], [DUAL IS], [Beauty Shot] and [Scene] mode. There is no menu available when the Voice recording or [Photo Help Guide] mode is selected.
Fn button Fn button: Size How to use the Fn menu You can select the image size appropriate for your application. 1. Press the Fn button in an available mode 2. Select a desired menu by pressing the Up/Down button. And then a sub menu will be displayed on the bottom left side of the LCD monitor.
Fn button: Quality / Frame rate Fn button: Metering You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures.
Fn button: Drive mode Fn button: ISO You can select continuous shot, and AEB (Auto Exposure Bracketing). You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. Single Icon Drive Mode Single Continuous AEB Motion Capture z z z z z z Description Icon Take one picture only. Images will be taken continuously until the Shutter button is released. Take three pictures in a series in different exposures: standard exposure (0.
Fn button: White balance The white balance control allows you to adjust the colours to appear more natural. Auto WB Icon White balance Mode Description Auto WB The camera automatically selects the appropriate white balance settings, depending on the prevailing lighting conditions. Daylight For taking images outside. Cloudy For taking images under a cloudy or overcast sky. Fluorescent_H For shooting under daylight fluorescent types of threeway fluorescent lighting.
Fn button: Exposure compensation Fn button: Aperture Value This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the Fn button. This mode will set the aperture value for automatic exposure in manual mode. Smaller aperture values make the object sharp but blur the background. Larger aperture values make both the object and background sharp. EV -2 Compensating Exposure -1 0 1 2 0 1.
Fn button: Movie clip frame stabiliser E (Effect) button This function helps stabilize images captured during movie recording. You can select this menu only in the Movie clip mode. If the memory card is not inserted, this function will not operate. It is possible to add special effects to your images by using this button. Off [Off]: Movie clip frame stabilizer function is disabled. [On]: Minimises camera shake during movie recording.
E (Effect) button: Image editing Press the E button in the [Auto], [Program], [Manual], [Movie] and some scene modes ([Portrait], [Children], [Landscope], [Close up]). Custom colour: You can change the R (Red), G (Green) and B (Blue) values of the image. Custom Color Colour 1. Select the desired sub menu by pressing the Left/Right button and press the OK button. 2. Press the Shutter button to take an image.
E (Effect) button: Image editing Press the E button in the [Program], [Manual] mode. Saturation Sharpness 1. Select the Sharpness( ) menu by pressing the Up/Down button and a bar for selecting the sharpness will be displayed. 2. Change the sharpness by pressing the Left/Right button and press the OK button. 3. Press the Shutter button to take an image. Sharpness Move OK Set Move OK Set Contrast 1.
OIS button: Optical image Stabilization The OIS function reduces blurring caused by camera shake when pressing the Shutter button. 1. Press the OIS button in the selectable mode. Using the LCD monitor to adjust the camera settings You can use the menu on the LCD monitor to set up recording functions. The items indicated by Menu 2. The OIS icon ( the left side. ) will be displayed on Face Detection 00005 3. Press the Shutter button halfway.
Face Detection If you use face detection options, your camera can detect a human face. When focusing on a human face, the brightness of the face is also adjusted. You can also capture natural facial expressions by using self portrait, smile shot or blink detection.
Face Detection ■ Self Portrait ■ Smile Shot When taking pictures of yourself, the area of your face is automatically detected so that you can take self portraits more easily and quickly. 1. For self-filming, set the camera lens towards the face of the object. It automatically detects the face of the object, and emits a guiding sound. 00005 - When locating the face in the center of the screen, it repeatedly emits a faster sound unlike the sounds that are emitted when the face is not in the center. 2.
Focus Area ACB You can select your preferred Focus Area according to the shooting conditions. RECORDING Face Detection Focus Area ACB Voice Memo Voice Record Back Focus Area Center AF Multi AF Center AF Multi AF This function is to adjust the contrast automatically when taking photos in an environment with big exposure difference i.e. backlight or contrast. This function adjusts the brightness automatically and allows the subject to be photographed clearly.
Voice Memo You can add your voice-over to a stored still image. (Max. 10 sec.) Voice recording RECORDING Face Detection Focus Area ACB Voice Memo Voice Record Back A voice can be recorded for as long as the available recording time (Max. 10 hour) allows. Press the Shutter button to record a voice. Off On OK Set – If the voice memo indicator is displayed on the LCD monitor, the setting is completed. 00005 – Press the Shutter button and take a picture. The picture is stored on the memory card.
Voice recording Recording the movie clip without voice Pausing while recording a voice 00:01:00 Using this function, you can record your favourite voice clips into a voice recording file without having to create multiple voice recording files. 00:00:06 SH Stop Pause 1. Press the Play & Pause ( ) button to pause recording. 2. Press the Play & Pause ( ) button again to resume the recording. 3. If you wish to stop recording, press the Shutter button again.
Scene mode Starting play mode Use the menu to easily confi gure optimal settings for a variety of shooting situations. Turn the camera on and select Play mode by pressing the Play mode ( ) button. The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory.
Starting play mode Playing back a movie clip 1. Select the recorded movie clip that 100-0010 you want to play back by using the Left/Right button. 2. Press the Play & Pause ( ) button to playback a movie clip file. – To pause a movie clip file while 00:00:16 playing it back, press the Play & E Capture Play Pause ( ) button again. – Pressing the Play & Pause ( ) button again will cause the movie clip file to restart. – To rewind the movie clip while it is playing, press the Left button.
Starting play mode On camera movie trimming Playing back a recorded voice You can extract desired frames of movie clip during the movie clip play back. If the running time is under 10 seconds, the movie clip can’t be trimmed. 1. Press the Play & Pause ( ) button at the point of the movie clip where you want to start extracting. 2. Press the T button. 3. Press the Play & Pause ( ) button and the extracted range will be displayed on the status bar. 4.
Starting play mode LCD monitor Indicator Playing back a voice memo The LCD monitor displays shooting information about the displayed image. 1 2 3 4 1. Select a still image that has the voice memo. 2. Press the Play & Pause ( ) button to play back the voice memo. – To pause the voice memo, while playing it back, press the Play & Pause ( ) button again. – To resume playback of the voice memo, press the Play & Pause ( ) button.
Using the camera buttons to set the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Play mode button Thumbnail( If you have turned on the camera by pressing the POWER button, you can press the Play mode button once to switch to Play mode and press it again to switch to Recording mode. You can turn the power on with the Play mode button. The camera is turned on in play mode. Press the Play mode button again to turn off the camera.
Using the camera buttons to set the camera Image enlargement 1. Select an image that you want to enlarge and press the Enlargement button. x 2.0 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the Thumbnail button will zoom back to the original full sized image. OK Trim – You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the top left of the LCD monitor.
Info ( ) / Up button Play & Pause ( When the menu is displayed on the LCD monitor, the Up button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info( ) button will display image information on the LCD monitor. 100-0010 100-0010 Info ( ) button ISO 80 AV 3.
Left / Right / Menu / OK button Delete ( ) button Left/Right/MENU/OK button activate the following. This deletes images stored on the memory card. By activating the Recycle Bin function (p.78) you can restore deleted photos. – Left button: While the menu is showing, the Left button operates as a direction button. While the menu is not showing, press the Left button to select the previous image. – Right button: While the menu is showing, the Right button operates as a direction button.
E (Effect) button: Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the Play mode button and press the E button. 2. Press the Left/Right button and select the [RESIZE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up/Down button and press the OK button. – Only JPEG images can be resized. Movie clip (AVI), Voice recording (WAV) files can’t be resized.
E (Effect) button: Rotating an image E (Effect) button: Colour You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. It is possible to add colour effects to your images by using this button. 1. Press the Play mode button and press the E button. 2. Press the Left/Right button and select the [ROTATE] ( ) menu tab. 3. Select a desired sub menu by pressing the Up/ Down button. 2.
E (Effect) button: Colour E (Effect) button: Image editing 1. Press the Play button and press the E button. Custom colour You can change the R(Red), G(Green) and B(Blue) values of the image. 2. Select ( Custom Color ◀▶ – OK button: Selects / sets up the Custom Colour – Up/Down button: Selects R, G, B – Left/Right button: Changes the values Move ACB OK Set Move You can automatically adjust the brightness of the dark area, caused by under exposure to the light source. 1.
E (Effect) button: Image editing Face Retouch Contrast control When you recorded a person, you can retouch the subject’s face. You can change the contrast of the image. 1. Select ( ) by pressing the Up/Down button and a bar for selecting the [Face Retouch] will be displayed. 2. Change the Face Retouch by pressing the Left/Right button. 3. Press the OK button and the image will be saved as a new file name.
Setting up the play back function using the LCD monitor Play mode functions can be changed by using the LCD monitor. In the Play mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the Play mode button or Shutter button.
Setting up the play back function using the LCD monitor Menu Tab Main Menu Type Quality Date Print File Name Reset Ú Sub Menu Auto - Plain - Photo - FastPhoto - Auto - Draft - Normal - Fine - Auto - Off - On - Auto - Off - On - No - Yes - Menus are subject to change without prior notice. 064 Sub Menu Starting the slide show ( ) Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor.
Starting the slide show ( ) Selecting Images Configure slide show effects You can select image to view. Unique screen effects can be used for the slide show. 1 Use the Up/Down button to select the [Images] menu and press the Right MULTI SLIDE SHOW Show Start button. All Images 2. Select a desired sub menu by pressing ▶ Date Effect Select ▶ Interval the Up/Down button. Music [All]: All images saved in the Memory are played back. OK Set Back [Date]: Images taken in a specified date are played back.
Starting the slide show ( ) Setting play interval Setting Background Music Set the slide show play interval. Set the slide show music. 1. Select the [Interval] sub menu by pressing the Up/Down button and press the Right button. 2. Use the Up/Down button to select the desired interval. 3. Press the OK button to save the configuration. z z z z 066 MULTI SLIDE SHOW Show Start Images Effect 1 sec Interval 3 sec Music 5 sec 10 sec Back OK Set The loading time depends on the image size and quality.
Playback ( ) Voice memo You can add your voice to a stored still image. 100-0010 PLAYBACK Voice Memo Protect Delete DPOF Copy To Card 100-0010 On Off 00:00:06 Back OK Set Start : Shutter SH Stop – Press the Shutter button to take a picture. The images are saved on the memory. After saving the image, the voice is recording for 10 seconds. – To stop the recording, press the Shutter button.
Playback ( ) Deleting images 3. After deletion, the screen will be changed to the play mode screen. This deletes images stored on the memory card. By activating the Recycle Bin function (p.78) you can restore deleted photos. 1. Press the Up/Down button and select the [Delete] menu tab. And then press the Right button. 2. Select a desired sub menu by pressing the Up/Down button and press the OK button. [Select]: Selection window for an image to delete is displayed.
Playback ( ) Standard 4. Press the OK button to confirm the setting. If an image carries DPOF instructions, the DPOF ( ) indicator will show. This function allows you to embed printing quantity information on a stored image. 1. Press the Up/Down button and select the [DPOF] menu tab. And then press the Right button. 2. Press the Right button again and [Standard] sub menu will be displayed.
Playback ( ) Print size You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. 1. Press the Up/Down button and select the [DPOF] menu tab. And then press PLAYBACK Select Standard the Right button. All Pics Index 2. Press the Right button again and select Size Cancel the [Size] sub menu will be displayed. 3. Select a desired sub menu by pressing the Up/Down button and press the OK OK Set Back button.
Playback ( ) Copy To Card This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [Copy To Card] menu tab by pressing the Up/Down button. And then PLAYBACK Voice Memo press the Right button. Protect 2. Select a desired sub menu by pressing Delete DPOF the Up/Down button and press the OK Copy To Card No button. Yes – [No]: Cancels [Copy To Card].
Sound menu Sound ( In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice recording mode. Volume The items indicated by Mode Menu are default settings. Sub Menu Available Mode Page Off Volume p.72 Sound 1 Back Sound 1 – Start Sound: [Off], [Sound 1], [Sound 2], [Sound 3] Off Sound 1 Sound 2 Sound 3 Self Portrait 072 OK Set You can select the sound that is activated whenever the camera is turned on.
Sound ( ) Shutter Sound AF Sound You can select the shutter sound. If you set AF sound to on, AF sound will be activated when the Shutter button is pressed down half way so that you can be aware of the camera operation status.
Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice recording mode.
Display ( ) Language Setting up the Date / Time / Date type There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. You can change the date and time that will be displayed on the captured images and set up the date type. If [World Time] is set in foreign countries, the date and time of the destination will be displayed on the LCD monitor.
Display ( ) Start up image Quick view You can select the image that is first displayed on the LCD monitor whenever the camera is turned on. If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Quick View] setup. Quick view is possible only with still images. – Sub menus: [Off], [Logo], [User Image] – Use a saved image for the start-up image with the [Start Image] in the [RESIZE] menu in the play mode.
Settings ( ) Formatting a memory Initialisation If you run [Format] on the memory, all files which are image, video clip and even protected images will be deleted. So be sure to download important files to your PC before formatting the memory. All camera menu and function settings will be restored to their default values. However, values for Date/Time, Language, and Video will not be changed. – Sub menus [No]: The memory will not be formatted. [Yes]: A window for confirming the selection displays.
Settings ( ) File name Recycle Bin You can activate the [Recycle Bin] function or restore photos saved in the recycle bin. By turning on this function, you can temporarily save photos up to a total 10MB capacity. You can also restore photos from the recycle bin. SETTINGS Format Reset Recycle Bin File Imprint Power Off Back This function allows the user to select the file naming format. Off On Recycle Folder OK Set – Sub menus [Off]: Do not want to use the Recycle Bin function.
Settings ( ) Imprinting the recording date Auto power off There is an option to include DATE/TIME on still images. This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage. – Sub menus [Off]: [Date]: The DATE & TIME will not be imprinted on the image file. Only the DATE will be imprinted on the image file.
Settings ( ) Selecting video out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. Yellow - Video White - Sound Connecting to an external monitor When the camera is connected to an external monitor, the image and menus on the LCD monitor will be visible on the external monitor and the LCD monitor of the camera.
Settings ( ) PictBridge Auto focus lamp You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. You can turn on and off the Auto Focus lamp. – Sub menus [Off]: The AF lamp will not light up in low light conditions. [On]: The AF lamp will light up in low light conditions.
PictBridge Ú PictBridge: Picture Selection If the [USB] menu is set to the [Computer], you cannot connect a Pictbridge compatible printer to the camera through USB cable with [Connecting Computer] message. In this case, remove the cable and do steps 1 and 2 again. Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. – Pressing the Left/Right button: Selects a previous / next image.
PictBridge: Print Setting PictBridge: Reset You can select the Paper Size, Print Format, Paper Type, Print Quality, Date Print, and File Name Print menus for printed pictures. Initialises user-changed configurations. 1. Press the MENU button and the PictBridge menu will be displayed. 2. Use the Up/Down button to select the desired menu, and then press the Right button. 3. Use the Up/Down button to select the desired sub menu value, and then press the OK button.
Software notes System requirements Please ensure that you read the instruction manual carefully before use. – Under no circumstances should all or part of either the software or the user manual be reproduced. – Copyrights for software are licensed only for use with a camera. – In the unlikely event of a manufacturing fault, we will repair or exchange your camera. We cannot, however, be held responsible in any way for damage caused by inappropriate use.
About the software After inserting the CD-ROM provided with this camera into the CDROM drive, the following window should automatically run. z z Be sure to check the system requirements. You should allow 5 ~ 10 seconds for running the automatic setup program according to the capability of your computer. If the frame does not appear, run the [Windows Explorer] and select [Installer.exe] in the CD-ROM Drive root directory.
Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. You can visit the Samsung web-site through the internet. http://www.samsung.com: English 1. The auto run frame will display. Click the [Samsung Digital Camera Installer] menu in the Auto run frame. 2.
Setting up the application software 4. Install the software by instructions on the monitor.
Setting up the application software 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. Ú If your OS is Windows XP/ Vista, an image viewer program will open. 088 z z PDF documents of user manual are included in the Software CD-ROM supplied with this camera. Search the PDF files with Windows explorer.
Starting PC mode If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to “computer connection mode”. In this mode, you can download stored images to your PC through the USB cable. Connecting the camera to a PC Ú If you selected [Printer] in Step 5, when you connect the camera to your computer, the [Connecting Printer] message will be displayed and the connection will not be established.
Starting PC mode Downloading stored images You can download the still images stored on the camera to your PC’s hard disk and print them or use a photo editing software to edit them. 5. Click a folder where you want to paste the file. 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 1. Connect the camera to your PC with the USB cable. 2. On your computer’s desktop display, select [My computer] and double click [Removable Disk DCIM 100SSCAM].
Removing the removable disk Windows 2000/XP/Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on. 2. Double-click the [Unplug or Eject Hardware] icon on the task bar. Double-click! 5. A [Safe to Remove Hardware] window will open. Click the [OK] button. 6. A [Unplug or Eject Hardware] window will open.
Samsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To run the Samsung Master, double click the Samsung Master icon on the desktop. Downloading images 1. Connect the camera to your PC. 2. A window for downloading images will display after connecting the camera to your PC. – To download the captured images, select the [Select All] button. – Select desired folder in the window and click the [Select All] button.
Samsung Master Image viewer: You can view the stored images. – Image viewer functions are listed below. 1 Menu bar: You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. 2 Image selection window: You can select the desired images in this window. 3 Media type selection menu: You can select image viewer, image edit and movie edit functions in this menu. 4 Preview window: You can preview an image or a movie clip and check the multi media information.
Samsung Master Movie edit: You can get the still image, movie clip, narration, music files together in a movie clip. Ú Ú – Movie clip edit functions are listed below. 1 Edit menu:You can select the following menus. [Add Media]: You can add other media elements to a movie. [Edit Clip]: You can change the brightness, contrast, colour and saturation. [Effects]: You can insert an effect. [Set Text]: You can insert texts. [Narrate]: You can insert a narration.
Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.3 or later. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. Using the USB Driver for MAC 1. Double click a new icon on the desktop and the folder in the memory will be displayed. 2.
Specifications Image Sensor – Type: 1/1.72” CCD – Effective Pixel: Approx. 13.6 Mega-pixel – Total Pixel: Approx. 13.9 Mega-pixel Lens – Focal Length: Samsung lens f = 6.0 ~ 21.6mm (35mm film equivalent: 28~102 mm) – F No.: F2.8(W) ~ F5.7(T) – Digital Zoom: Still Image mode: 1.0X ~ 5.0X Play mode: 1.0X ~ 13.2X (depends on image size) LCD Monitor – 2.
Specifications – Movie Clip • With Audio or without Audio (user selectable, recording time : Memory capacity dependent, max 2hours) • Size: 800x592(20FPS), 640x480 (30FPS,15FPS), 320x240(30FPS, 15FPS) • Frame rate: 15FPS, 20FPS, 30FPS • Optical Zoom up to 3.
Specifications Interface Power Source – Digital output connector: USB 2.0 High Speed 20 pin connector – Audio: Mono (Speaker), Stereo (Microphone) – Video output: NTSC, PAL (user selectable) – DC Adapter: 4.2V, 20 pin connector Important notes Be sure to observe the following precautions! z – Areas exposed to extremes of in temperature and humidity. – Areas exposed to dust and dirt. – Areas exposed to direct sunlight or the inside of a vehicle in hot weather.
Important notes – This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. – If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. z z Do not attempt to disassemble or modify the camera. z Under certain conditions, static electricity can cause the flash unit to fire.
Warning indicator There are several warnings that may appear on the LCD display. [ Card Error ! ] • Memory card error. Turn off the camera power and turn it on again. Insert the memory card again. Insert and format the memory card. (p.77) [ Card Locked! ] • The memory card is locked. SD/SDHC memory card: Slide the write protect switch to the top of the memory card. [ No Card! ] • A memory card is not inserted. Insert the memory card. Turn off the camera power and turn it on again.
Before contacting a service centre Please check the following. The camera doesn’t switch on. • There is low battery capacity. Insert fresh batteries. (p.15) • Battery is inserted incorrectly with the polarities reversed. Insert the battery according to the polarity marks (+, -). The camera power ceases while in use. • The battery is exhausted. Insert a fully charged battery. • The Camera is turned off automatically Turn on the camera power again.
Before contacting a service centre The flash does not fire. • Flash off mode has been selected. Dis-engage flash off mode. • The camera mode can’t use the flash. Refer to the FLASH instruction. (p.32-33) Incorrect date and time is displayed • The date and time have been set incorrectly or the camera has adopted the default settings. Reset the date and time correctly. A card error has occurred while the memory card is in the camera. • Incorrect memory card format. Re-format the memory card.
FAQ Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. Case 3 There is an unexpected error during file transfer.
FAQ When the movie clip doesn’t play back on the PC Ú [Installing codec for Mac OS] 1) Visit the following site for downloading the codec. (http://www.divx. com/divx/mac) 2) Click the [Free Download] menu on the top right side of the window then download windows appears. 3) Check the version of Mac OS and click the [Download] button to download the file and save it on a desired folder. 4) Run the downloaded file and the codec for playing back the movie clip will be installed.
FAQ If a PC connected with the camera stops responding while Windows is starting. In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus don’t have Legacy USB Support) If you can’t change the menu by yourself, contact to the PC manufacturer or BIOS manufacturer.
FCC notice NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
