Upgrade guide

Updating the firmware
Before upgrading the firmwareBefore upgrading the firmware
Before
upgrading
the
firmwareBefore
upgrading
the
firmware
1. Make sure you use fully charged batteries. If fully charged batteries are not used, or the power is cut during a
firmware upgrade, the main board may be seriously damaged, resulting in camera malfunction.
If camera malfunction is caused during a firmware upgrade for the reasons given above the main board may
If
camera
malfunction
is
caused
during
a
firmware
upgrade
for
the
reasons
given
above
,
the
main
board
may
have to be serviced by a Samsung service center, which may result in major repair charges.
2. Before upgrading the firmware, make sure that you format the memory card on your PC or camera and then
download the necessar
y
firmware file.
y
3. To upgrade firmware there should be sufficient free space on the memory card for the size of the firmware file.
If the firmware upgrade is not completed because of insufficient memory space, delete some of the files saved
on the memory to secure more free space and then try again. (over 100MB recommended)
4. Do not operate the camera, remove the batteries, or cut the power while upgrading firmware.
Operate the camera only after the firmware upgrade is complete.
.
nce
e
rmware
s upgra
e
,
s no
poss
e
o res
ore
e ear
er vers
on o
e
rmware.
When the firmware is upgraded, all the camera settings are set to their default values.
Since all the files stored in the internal memory(not Memory card) will be deleted, ensure that files are copied
to other storage devices before upgrading firmware.
6. Before upgrading the firmware, ensure that the PC is connected to a network.
Should you need further detailed information, or if you experience difficulty in upgrading firmware, do not
proceed with the process on your own. Visit a Samsung service center near you.
proceed
with
the
process
on
your
own.
Visit
a
Samsung
service
center
near
you.