User Manual

6
Connecting to other devices
You can connect the Bluetooth speaker to other Bluetooth-
enabled devices, such as smartphones or computers. Also, if
you have devices that support the near field communication
(NFC) feature, you can control the Bluetooth feature to
connect the devices to the speaker.
When connecting for the first time, pair the speaker with the
other Bluetooth-enabled device. Keep the devices close to
each other while pairing or using the speaker.
Instructions for Bluetooth connection or Bluetooth
connection via NFC may vary by device. Refer to the
device’s user manual for additional information.
Turning the Bluetooth speaker on or off
Press and hold the Power button to turn the Bluetooth speaker
on or off. When you turn on the speaker for the first time, it
enters the Bluetooth pairing mode.
• When the speaker is turned on, the Power button flashes
blue three times.
• When the speaker is turned off, the Power button flashes red
three times before turning off.
• To check that the speaker is on, press the Power
button. The Power button flashes three times in
different colors to indicate the remaining battery
power.
• If the speaker freezes, press and hold the Power
button for more than 10 seconds. The speaker will
reset and restart.