Specifications

48 • Advanced Programming Instructions ER-290 Electronic Cash Register

System Option Programming

Nineteen system options are provided so that you can configure the ER-290 to your exact

requirements. Refer to the “System Option Table” on page 50 to review the system options. Read

each option carefully to determine if you wish to make any changes.

NOTE: Because after clearing memory all options settings are automatically

set to 0, and because your most likely option selections require a status setting

of 0, you do not need to program this section unless you wish to change the

default status.

Programming a System Option:

1. Turn the control lock to the PGM position.

2. Enter the option number of the system option you wish to change. Press the RECD

ACCT key.

3. Enter the number representing the status you have selected. Press the PAID OUT key.

4. Repeat from step 3 for each system option you wish to change.

5. Press the CASH/TEND key to end programming.

System Option Flowchart

PAID

OUT

RECD

CCT

Status

CASH/

TEND

Repeat for each

System Option

Option #