Specifications

15
Indicates that a clerk must be signed on for operating in the ‘ X’ or ‘ Z’ mode.
Indicates that the maximum slip lines is reached.
Please insert the new slip into the slip printer and press the “ CHECK TENDER” key.
Indicates an error condition.
Press the “ CLEAR” key to clear this condition.
Indicates that the cash drawer must be closed.
Indicates that NON-ADD NUMBER should be entered.
Indicates that the ADD CHECK operation must be performed.
Indicates that the cash declaration operation must be performed.
Indicates that EAT-IN / TAKE-OUT / DRIVE-THRU procedure must be performed
before tendering.
Indicates that now a table is open.
Indicates that all the open tables or clerks must be finalized.
Indicates that the sale data is too big.
Please issue all Z report. ( ‘100’ – ‘SUBTL’ in Z mode )
Indicates that the scale runtime over.
Indicates that the scale is not measurable things on the scale.
Indicates that the open drawer warning tone sounds by the open drawer alarm.
Please close the cash drawer.
Indicates that the slip printer is disconnected.
Please check if the slip printer is connective.
Indicates that the paper run out on the EPSON TM-290 ?.
C L
S E
E 1
E 2
E 4
E 5
E 6
E 7
E 8
E 9
E 1 0
E 1 1
E 1 2
E 1 3
E 1 4
no PAP