Specifications

42
2.10.4 PLU LINK PROGRAMMING
This programming is used to link two or more PLUs.
The second PLU ( B ) will be automatically registered when the first PLU ( A ) is registered.
PLU NO. ( A ) PLU NO. ( B )
2.10.5 REMOVING OR DELETING A PLU
In order to “ de-activate” a PLU, or “ remove” its status and linked department.
Deleted or inactivated PLUs will not be allowed to register.
( 1 ) Enter the PLU number ( 1 ~ 1000 ), and press the “PLU” key.
( 2 ) Press the “VOID” key.
NOTE : PLUs with a total may not be removed ( or deleted ).
Issue the PLU report in “ Z” mode before removing any PLU with a total.
#/NS CASH/TEND PLU
VOID PLU
X X X X X X X X
X X X X