User Manual

123
Wireless network
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a
WLAN. You can also congure network settings.
Connecting to a WLAN
1
Rotate the mode dial to B.
2
Select , , , or .
3
Press [m], and then select Wi-Fi Setting.
 In some modes, follow the on-screen instructions until the Wi-Fi
Setting screen appears.
 The camera automatically searches for available AP devices.
4
Select an AP.
Back
Refresh
Samsung1
Samsung2
Samsung3
Samsung4
 Select Refresh to refresh the list of connectable APs.
 Select Add wireless network to add an AP manually. The AP name
must be in English to add the AP manually.
Icon/Option Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [F] or touch to open network setting options.
 When you select a secured AP, a pop-up window appears. Enter the
required passwords to connect to the WLAN. For information about
entering text, refer to "Entering text". (p. 127)
 When a login page appears, refer to "Using the login browser".
(p. 125)
 When you select an unsecured AP, the camera will connect to the
WLAN.
 If you select a WPS prole supported AP, select ĺ WPS PIN
connection, and then enter a PIN on the AP device. You can also
connect to a WPS prole supported AP by selecting
ĺ WPS
button connection on the camera, and then pushing the WPS
button on the AP device.
 The same AP may be listed twice, with dierent frequencies,
because your camera supports the dual band function.