User Manual

133
Wireless network
Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC
wirelessly.
Installing the program for Auto Backup on
your PC
1
Install i-Launcher on the PC. (p. 163)
2
Connect the camera to the PC with the USB cable.
3
When the Auto Backup program icon appears, click it.
 The Auto Backup program is installed on the PC and the
information about the PC will be stored to the camera. Follow the
on-screen instructions to complete the installation.
 You can also save the information about the PC to the camera by
connecting the PC and the camera via Wi-Fi.
4
Remove the USB cable.
Before installing the program, ensure that the PC is connected to a network.
If no internet connection is available, you must install the program from the
provided CD.
Sending photos or videos to a PC
1
Rotate the mode dial to B.
2
Select .
 If the pop-up message that prompts you to download the
application appears, select Next.
 You must congure the backup PC information to use the Auto
Backup feature. For more details, refer to "Installing the program
for Auto Backup on your PC". (p. 133) If the Auto Backup program is
installed on your PC, save the PC information via USB cable or Wi-Fi
connection.
 The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
 If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 123)