User Manual
Table Of Contents
- Copyright information
- Health and safety information
- Indications used in this manual
- Contents
- Tips
- Chapter 1
- My Camera
- Getting started
- Camera layout
- Inserting the battery and memory card
- Charging the battery and turning on your camera
- Performing the initial setup
- Selecting functions (options)
- Display icons
- Lenses
- Accessories
- Shooting modes
- My Camera
- Chapter 2
- Chapter 3
- Chapter 4
- Wireless network
- Connecting to a WLAN and configuring network settings
- Saving files to a smart phone automatically
- Sending photos or videos to a smart phone
- Using a smart phone as a remote shutter release
- Using Auto Backup to send photos or videos
- Sending photos or videos via email
- Using photo or video sharing websites
- Using Samsung Link to send files
- Sending photos using Wi-Fi Direct
- Wireless network
- Chapter 5
- Chapter 6
- Chapter 7
134
Wireless network > Using Auto Backup to send photos or videos
3
Select a backup PC.
If you have performed a backup before, move to step 4.
4
Select OK.
To cancel sending, select Cancel.
You cannot select individual les to backup. This function backs up
only new les on the camera.
The backup's progress will be shown on the PC monitor.
When the transfer is completed, the camera will turn o
automatically in approximately 30 seconds. Select Cancel to return
to the previous screen and prevent the camera from turning o
automatically.
To turn o your PC automatically after the transfer is complete,
select Shut down PC after backup.
To change the backup PC, select .
When you connect the camera to the WLAN, select the AP that is connected
to the PC.
The camera will search for available access points even if you are connecting
to the same access point again.
If you turn o the camera or remove the battery while sending les, the le
transfer will be interrupted.
While you are using this feature, the shutter control is disabled on your
camera.
You can connect only one camera to the PC at a time for sending les.
The backup may be canceled due to network conditions.
Photos or videos can be sent to a PC one time only. Files cannot be sent again
even if you reconnect your camera to another PC.
When there are no les in the camera memory, you cannot use this feature.
You must turn o Windows Firewall and any other rewalls before using this
feature.
You can send up to 1,000 recent les.
On the PC software, the server name must be entered in the Latin alphabet
and can contain no more than 48 characters.
When multiple le types are created at once, only the image les (JPG) will be
sent to the PC with this feature.