User Manual

137
Wireless network > Sending photos or videos via email
Changing the email password
1
Rotate the mode dial to B.
2
Select .
 The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
 If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 123)
3
Press [m].
4
Select Change Password.
5
Enter your current 4-digit password.
6
Enter a new 4-digit password.
7
Enter the new password again.
8
When the pop-up appears, select OK.
Sending photos or videos via email
You can send photos or videos stored on the camera via email. For
information about entering text, refer to "Entering text". (p. 127)
1
Rotate the mode dial to B.
2
Select .
 The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
 If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 123)
3
Select the Sender box, enter your email address, and then
touch
.
 If you have previously saved your information, it will be inserted
automatically. (p. 135)
 To use an address from the list of previous senders, select ĺ
an address.