User Manual

142
Wireless network > Using Samsung Link to send les
Viewing photos or videos on devices that
support Samsung Link
1
Rotate the mode dial to B.
2
Select ĺ Nearby devices.
 If the guide message appears, select Ye s .
 The camera will automatically attempt to connect to a WLAN via
the most recently connected AP device.
 If the camera has not previously been connected to a WLAN, it will
search for available AP devices. (p. 123)
 You can set to allow only selected devices or all devices to connect
by pressing [m], and then selecting DLNA Access Control on
the screen.
 A sharing le list is created. Wait until other devices can nd your
camera.
3
Connect the Samsung Link device to a network, and then turn
on the Samsung Link feature.
 Refer to your device's user manual for more information.
4
On the camera, allow the Samsung Link device to connect to
your camera.
5
On the Samsung Link device, select a camera to connect to.
6
On the Samsung Link device, browse the shared photos or
videos.
 For information about searching for the camera and browsing the
photos or videos on the Samsung Link device, refer to the device's
user manual.
 Videos may not play smoothly depending on the type of Samsung
Link device or the network condition. For smooth playback, use a
5 GHz dual-band AP device.
AP
S
The camera is connected to a TV that supports Samsung Link via WLAN.