User Manual

Table Of Contents
143
Wireless network > Using Samsung Link to send les

You can share up to 1,000 recent les.

On a Samsung Link device, you can view only photos or videos captured with
your camera.

The range of the wireless connection between your camera and a Samsung
Link device may vary depending on the specications of the AP.

If the camera is connected to 2 Samsung Link devices, playback may be
slower.

Photos or videos will be shared in their original sizes.

You can use this feature only with devices that support Samsung Link.

Shared photos or videos will not be stored on the Samsung Link device, but
they can be stored in the camera to meet the device's specications.

Transferring photos or videos to the Samsung Link device may take some
time depending on the network connection, the number of les to be shared,
or the sizes of the les.

If you power o the camera abnormally while viewing photos or videos on
a Samsung Link device (for example, by removing the battery), the device
considers the camera to still be connected.

The order of photos or videos on the camera may be dierent than on the
Samsung Link device.

Depending on the number of photos or videos you want to share, it may
take some time to load your photos or videos and complete the initial set-up
process.

While viewing photos or videos on the Samsung Link device, continuously
using the device's remote or performing additional operations on the device
may prevent this feature from working properly.

If you reorder or sort les on the camera while viewing them on a Samsung
Link device, you must repeat the initial set-up process to update the list of
les on the device.

When there are no les in the camera memory, you cannot use this feature.

We recommend you use a network cable to connect your Samsung
Link device to your AP. This will minimize any video ‘Stuttering’ you may
experience when streaming content.

To view les on a Samsung Link device using the Nearby devices feature,
enable multicast mode on your AP.

1920X1080 (60 fps) videos can be played only on full HDTVs capable of
playback at 60 fps.

You can view 3D les only on 3D-compatible TVs or monitors.