User Manual
Table Of Contents
- Copyright information
- Health and safety information
- Indications used in this manual
- Contents
- Tips
- Chapter 1
- My Camera
- Getting started
- Camera layout
- Inserting the battery and memory card
- Charging the battery and turning on your camera
- Performing the initial setup
- Selecting functions (options)
- Display icons
- Lenses
- Accessories
- Shooting modes
- My Camera
- Chapter 2
- Chapter 3
- Chapter 4
- Wireless network
- Connecting to a WLAN and configuring network settings
- Saving files to a smart phone automatically
- Sending photos or videos to a smart phone
- Using a smart phone as a remote shutter release
- Using Auto Backup to send photos or videos
- Sending photos or videos via email
- Using photo or video sharing websites
- Using Samsung Link to send files
- Sending photos using Wi-Fi Direct
- Wireless network
- Chapter 5
- Chapter 6
- Chapter 7
155
Camera settings menu > Setting
* Default
Item Description
Format
Format the memory card. Formatting deletes all existing
les including protected les. (Ye s , No)
Errors can occur if you use a memory card formatted by
another brand of camera, a memory card reader, or a
computer. Please format memory cards in the camera
before using them to capture photos.
Device
Information
View the rmware version of the body and the lens, Mac
address, and network certication number, or update the
rmware.
Firmware Update: Update the rmware of the camera
body or lens. (Body Firmware, Lens Firmware)
You can download rmware upgrades from
www.samsung.com.
You cannot run a rmware upgrade without a fully
charged battery. Recharge the battery fully before
running a rmware upgrade.
If you update the rmware, user settings and values will
be reset. (Date, time, language, and video out will not
change.)
Do not turn the camera o while the update is in
progress.
* Default
Item Description
Dual-band
Mobile AP
Set a frequency for using the camera as an AP for the
AutoShare, MobileLink, or Remote Viewnder feature.
(5 GHz, 2.4 GHz*)
If you use the camera in a country other than the one
where it was purchased, the 5 GHz Wi-Fi feature may not
function properly, due to dierences in radio frequencies.
In this case, use the 2.4 GHz Wi-Fi feature instead.
GPS
Geotagging: Set to capture photos with location
information using the Global Positioning System (GPS).
Location information is added to the Exif data associated
with the photo. (O, On*)
GPS Valid Time Settings: Set the time to use the last
location information when the camera fails to receive
GPS signals. If the camera fails to receive GPS signals after
the specified time, the location information will not be
recorded onto the photos. (15 sec*, 30 sec, 1 min, 3 min,
10 min, 30 min)
Location Display: Set to display the location information
on the screen in Shooting mode. The location information
will appear in Korean only when you are in Korea and
the display language is set to Korean. When another
language is set, the location information will appear in
English. (O, On*)
GPS Reset: Set to search for GPS satellites closest to your
current position. (Ye s , No)
To use the GPS function, you must purchase an optional
GPS device.