User Manual
Table Of Contents
- Copyright information
- Health and safety information
- Indications used in this manual
- Contents
- Tips
- Chapter 1
- My Camera
- Getting started
- Camera layout
- Inserting the battery and memory card
- Charging the battery and turning on your camera
- Performing the initial setup
- Selecting functions (options)
- Display icons
- Lenses
- Accessories
- Shooting modes
- My Camera
- Chapter 2
- Chapter 3
- Chapter 4
- Wireless network
- Connecting to a WLAN and configuring network settings
- Saving files to a smart phone automatically
- Sending photos or videos to a smart phone
- Using a smart phone as a remote shutter release
- Using Auto Backup to send photos or videos
- Sending photos or videos via email
- Using photo or video sharing websites
- Using Samsung Link to send files
- Sending photos using Wi-Fi Direct
- Wireless network
- Chapter 5
- Chapter 6
- Chapter 7
95
Shooting Functions > Flash
Reducing the red-eye eect
If the ash res when you capture a photo of a person in the dark, a red
glow may appear in the eyes. To reduce the red-eye eect, select Auto
Red-eye or Fill-in Red.
Without red-eye reduction With red-eye reduction
If the subject is too far from the camera or moves when the rst ash res, red-
eyes may not be reduced.
Adjusting the ash intensity
When the ash is on, adjust the ash intensity +/-2 levels.
To set the ash
intensity,
In Shooting mode, press [f]
ĺ
Flash
ĺ
an option
ĺ
[D]
ĺ
scroll the jog dial or press [C/F] to adjust the ash
intensity.
Back
Set
Flash : 0.0
You can also drag the slider or touch +/- to adjust the intensity.
Adjusting the flash intensity may not be eective when:
-
the subject is too close to the camera
-
you set a high ISO sensitivity
-
the exposure value is too big or too small
In some shooting modes, you cannot use this function.
If you attach an intensity-adjustable external ash to the camera, the intensity
settings of the ash will be applied.
If the subject is too close when you use the ash, some light may be blocked,
resulting in a dark photo. Ensure that the subject is within the recommended
range, which varies by lens.
When a lens hood is attached, the light from the ash can be blocked by the
hood. Remove the hood to use the ash.