USER MANUAL ENG This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Copyright information • Microsoft Windows and the Windows logo are registered trademarks of • Camera specifications or contents of this manual may be changed • Mac and Apple App Store are registered trademarks of the Apple • You are not allowed to reuse or distribute any part of this manual • Google Play Store is a registered trademark of Google, Inc. • We recommend using your camera within the country where you the Microsoft Corporation. Corporation.
Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera. Warning—situations that could cause injury to yourself or others Do not disassemble or attempt to repair your camera. You can damage the camera and expose yourself to the risk of an electric shock. Do not use your camera near flammable or explosive gases and liquids. This may cause a fire or explosion.
Health and safety information If liquid or foreign objects enter your camera, immediately disconnect all power sources, such as the battery or charger, and then contact a Samsung service center. Comply with any regulations that restrict the use of a camera in a certain area. • Avoid interference with other electronic devices. • Turn off the camera when in an aircraft. Your camera can cause interference with aircraft equipment.
Health and safety information Do not touch the flash while it fires. The flash is very hot when fired and may burn your skin. When you use the AC charger, turn off the camera before you disconnect the power to the AC charger. Failing to do so may result in fire or electric shock. Disconnect the charger from the wall socket when not in use. Failing to do so may result in fire or electric shock. Do not use a damaged power supply cord, plug, or loose outlet when you charge batteries.
Health and safety information Check that the camera is operating properly before use. Avoid interference with other electronic devices. The manufacturer takes no responsibility for any loss of files or damage that may result from camera malfunction or improper use. Your camera emits radio frequency (RF) signals that may interfere with unshielded or improperly shielded electronic equipment, such as pacemakers, hearing aids, medical devices, and other electronic devices in homes or vehicles.
Icons used in this manual Icons used in this manual Icon Mode indications Function Mode Indication Additional information Smart Auto t Safety warnings and precautions Program P [ ] Camera buttons. For example, [Shutter] represents the shutter button. Aperture Priority A Shutter Priority S ( ) Page number of related information Manual M → The order of options or menus you must select to perform a step; for example: Select b → Quality (represents select b, and then Quality).
Contents Tips Chapter 1 Concepts in Photography My Camera Shooting postures....................................................................................... 13 Getting started............................................................................................. 28 Unpacking.................................................................................................................... 28 Camera layout.......................................................................................
Contents In Playback mode....................................................................................................... 43 Viewing photos............................................................................................................. 43 Playing videos................................................................................................................ 43 Changing the information displayed.................................................................. 44 Lenses...........
Contents Drive (shooting method)............................................................................ 84 Single.............................................................................................................................. 84 Continuous................................................................................................................... 85 Burst................................................................................................................................
Contents Viewing photos........................................................................................... 106 Enlarging a photo................................................................................................... 106 Viewing a slide show.............................................................................................. 106 Auto rotating............................................................................................................ 107 Playing videos............
Contents Chapter 5 Chapter 6 Camera settings menu Connecting to external devices User settings................................................................................................ 133 ISO Customizing...................................................................................................... 133 Viewing files on an HDTV......................................................................... 145 ISO Step..............................................................................
Contents Chapter 7 Appendix Error messages........................................................................................... 153 Maintaining the camera........................................................................... 154 Cleaning the camera.............................................................................................. 154 Camera lens and display.......................................................................................... 154 Image sensor......................
Concepts in Photography Shooting postures A correct posture for stabilizing the camera is necessary for taking a good photo. Even if you hold a camera correctly, the wrong posture can cause the camera to shake. Stand up straight and remain still to maintain a steady base for your camera. When shooting with a slow shutter speed, hold your breath to minimize body movement. Holding the camera Hold the camera with your right hand and place your right index finger on the shutter button.
Concepts in Photography Standing photography Compose your shot, stand up straight with your feet shoulder-length apart, and keep your elbows pointed down. Crouching photography Compose your shot, crouch with one knee touching the ground, and keep a straight posture.
Concepts in Photography Aperture The aperture is one of the three factors that determine the exposure. The aperture housing contains thin, metal plates that open and close to let light through the aperture and into the camera. The size of the aperture is related to the amount of light: a larger aperture allows more light and a smaller aperture allows less light. Aperture sizes The size of the aperture is represented by a value known as an "F-number.
Concepts in Photography Aperture value and the depth of field You can blur or sharpen the background of a photo by controlling the aperture. It is closely related to the depth of field (DOF), which can be expressed as small or large. The aperture housing contains several blades. These blades move together and control the amount of light passing through the center of the aperture. The number of blades also affects the shape of light when shooting night scenes.
Concepts in Photography Shutter speed Therefore, the faster the shutter speed, the less light will be let in. Likewise, the slower the shutter speed, the more light will be let in. Shutter speed refers to the amount of time it takes to open and close the shutter. It controls the amount of light which passes through the aperture before it reaches the image sensor. Usually, the shutter speed is manually adjustable.
Concepts in Photography ISO sensitivity The exposure of an image is determined by the sensitivity of the camera. This sensitivity is based on international film standards, known as ISO standards. On digital cameras, this sensitivity rating is used to represent the sensitivity of the digital mechanism that captures the image. ISO sensitivity doubles as the number doubles. For example, an ISO 200 setting is capable of capturing images at twice the speed of an ISO 100 setting.
Concepts in Photography How the aperture setting, shutter speed, and ISO sensitivity control exposure The aperture setting, shutter speed, and ISO sensitivity are closely interconnected in photography. The aperture setting controls the opening that regulates the light that enters the camera, while the shutter speed determines the length of time that light is allowed to enter. ISO sensitivity determines the speed at which the film reacts to light.
Concepts in Photography Correlation between focal length, angle, and perspective Long focal length Focal length, which is measured in millimeters, is the distance between the middle of the lens to its focal point. It affects the angle and perspective of captured images. A short focal length translates into a wide angle, which allows you to capture a wide shot. A long focal length translates into a narrow angle, which allows you to capture telephoto shots.
Concepts in Photography Depth of field What controls out-of-focus effects? Portraits or still-life photos mostly acclaimed by people are the ones on which the background is out of focus so the subject looks pronounced. Depending on the focused areas, a photo can be blurred or sharpened. This is called 'a low DOF' or 'a high DOF'. The depth of field is the focused area around the subject. Therefore, a small DOF signifies that the focused area is narrow and a large DOF means the focused area is wide.
Concepts in Photography DOF depends on focal length The longer the focal length is, the lower the DOF gets. A telescope lens with a longer focal length than a wide-angle lens with a short focal length is better to capture a photo of a low DOF. A photo captured with a 16 mm wide-angle lens A photo captured with a 100 mm telescope lens DOF depends on the distance between the subject and the camera The shorter the distance between the subject and the camera is, the lower the DOF gets.
Concepts in Photography DOF preview You can press the Custom button to get an idea of what your shot will look like before shooting. The camera adjusts the aperture to the predefined settings and shows the results on the screen. Set the function of the Custom button to Optical Preview. (p. 138) Composition It is fun to capture a photo of the beauty of world with a camera. No matter how the world is beautiful, however, a poor composition cannot capture the beauty of it.
Concepts in Photography Using the rule of thirds will create photos with stable and compelling compositions. Below are a few examples. Photos with two subjects If your subject is in one corner of the photo, it creates an unbalanced composition. You can stabilize the photo by capturing a second subject in the opposite corner to balance the weight of the photo.
Concepts in Photography When taking landscape photos, centering the horizon will create an unbalanced effect. Give more weight to the photo by moving the horizon up or down. Subject 1 Subject 1 Flash Light is one of the most important components in photography. It is not easy, however, to have an enough amount of light anytime and anywhere. Making use of a flash allows you to optimize light settings and create a variety of effects.
Concepts in Photography Flash guide number The model number of a flash refers to the flash’s power, and the maximum amount of light created is represented by a value known as a "guide number". The bigger the guide number, the more light is emitted from the flash. The guide number is achieved by multiplying the distance from the flash to the subject and the aperture value when the ISO sensitivity is set to 100.
Chapter 1 My Camera Learn about your camera’s layout, display icons, lens, optional accessories, and basic functions.
My Camera Getting started Unpacking Check your product box for the following items. Camera AC adapter/USB cable Rechargeable battery External flash Strap Quick Start Guide • The illustrations may differ from your actual items. • You can purchase optional accessories at a retailer or a Samsung service center. Samsung is not responsible for any problems caused by using unauthorized accessories. For information about accessories, refer to page 180.
My Camera Camera layout 1 2 3 4 5 6 5 7 No. Name 1 Mode dial • t: Smart Auto mode (p. 52) • P: Program mode (p. 54) • A: Aperture Priority mode (p. 56) • S: Shutter Priority mode (p. 57) • M: Manual mode (p. 58) • s: Smart mode (p. 60) • R: Beauty Face mode (p. 63) • B: Wireless Network (p. 114) 2 Shutter button 3 Power button 8 9 13 12 11 10 4 No.
My Camera > Camera layout No. 1 2 3 4 5 6 11 Name 1 Video recording button 2 Eyelet for camera strap 3 Internal antenna* 4 No. Navigation button (Smart dial) • In Shooting mode: -- D: Change the information on the Start recording a video. f button Access the Smart panel and fine-tune some settings. display. -- I: Select the shutter speed, 8 o button • In the Menu screen: Save the selected 10 9 8 7 5 options.
My Camera > Camera layout 1 2 4 No. Name 1 HDMI port 2 USB port 3 Battery chamber/Memory card cover 4 Tripod mount Connect the camera to a computer. Insert a memory card and battery. 3 Using the MOBILE button Select a Wi-Fi function that connects to a smart phone by pressing [ Press [ ] again to return to the previous mode. ].
My Camera > Camera layout Using the display You can take a self-portrait while looking at yourself on the display by flipping the display up. 2 Half-press [Shutter] to focus, and then press [Shutter]. • After 3 seconds, the camera automatically releases the shutter. • When the camera is off, flipping the display upward automatically turns the camera on. Using the Self shot mode • The Self shot mode is not available in B mode. • Keep the display closed when the camera is not in use.
My Camera Inserting the battery and memory card Learn how to insert or remove the battery and an optional memory card into the camera. Removing the battery and memory card Battery lock Slide the lock down to release the battery. Rechargeable battery Push the card gently until it disengages from the camera, and then pull it out of the slot. Insert the battery with the goldcolored contacts facing right. Memory card Rechargeable battery Insert a memory card with the gold-colored contacts facing down.
My Camera Charging the battery and turning on your camera Charging the battery Turning on your camera Before you use the camera for the first time, you must charge the battery. Plug the small end of the USB cable into your camera, and then plug the other end of the USB cable into the AC adapter. To turn on or off the camera, press [ ]. • The initial setup screen appears when you turn on the camera for the first time. (p.
My Camera Performing the initial setup When you turn on your camera for the first time, the initial setup screen appears. The language is preset for the country or region where the camera is sold. You can change the language as desired. 1 Press [I] to select Time Zone, and then press [o]. 2 Press [D/I] to select a time zone, and then press [o]. 5 Press [D/I] to set the option, and then press [o].
My Camera > Performing the initial setup 8 Press [I] to select Time Type, and then press [o]. 9 Press [D/I] to select a time type, and then press [o]. Time Type 12 Hr 24 Hr Back Set 10 Press [m] to finish the initial setup.
My Camera Selecting functions (options) Rotate the navigation button or press [D/I/C/F] to move, and then press [o] to select an option. Using m Press [m], and then change shooting options or settings. E.g. Selecting the photo size in P mode 1 Rotate the mode dial to P. 2 Press [m]. 3 Press [C], rotate the navigation button or press [D/I] to move to b, and then press [o]. 4 Rotate the navigation button or press [D/I] to move to Photo Size, and then press [o].
My Camera > 5 Selecting functions (options) Rotate the navigation button or press [D/I] to move to an option, and then press [o]. • Press [m] to go back to the previous menu. Using the Smart panel Press [f] to access some functions such as Exposure, ISO, and White Balance. Photo Size (3:2) (5472x3648) E.g. Adjust the exposure value in P mode (3:2) (3888x2592) (3:2) (2976x1984) (3:2) (1728x1152) 1 Rotate the mode dial to P. 2 Press [f]. 3 Press [D/I/C/F] to move to EV, and then press [o].
My Camera > Selecting functions (options) Using iFn Press [i-Function] on an i-Function lens to manually select and adjust shutter speed, aperture value, exposure value, ISO sensitivity, and White Balance on the lens. 1 Rotate the mode dial to P, A, S, or M. 2 Press [i-Function] on the lens to select a setting. • To select items to appear, select [m] → d → iFn Customizing → 3 Option Description Aperture Adjust the aperture value. Shutter Speed Adjust the shutter speed.
My Camera > Selecting functions (options) Available options Shooting mode P A S M Aperture - O - O Shutter Speed - - O O EV O O O - ISO O O O O White Balance O O O O 40
My Camera Display icons In Shooting mode Icon Description • • Capturing photos 1 2 : Fully charged : Partially charged • (Red): Empty (recharge the battery) • : Charging Auto focus frame Spot metering area Icon Description Photo size Drive mode Flash (p. 89) Flash intensity adjustment Metering (p. 91) AF mode (p. 74) Camera shake Face detection Manual focus scale Focus area Level gauge (p. 42) White Balance (p. 71) Histogram (p.
My Camera > Display icons Recording videos 2. Shooting options 1 Icon Description Video size AF mode (p. 74) 2 Metering (p. 91) White Balance (p. 71) About the level gauge The level gauge helps you align the camera with the horizontal and vertical lines on the display. If the level gauge is not level, calibrate the level gauge using the Horizontal Calibration function. (p. 140) Vertical White Balance micro adjustment Optical Image Stabilization (OIS) (p. 83) 1.
My Camera > Display icons In Playback mode Viewing photos Mode F No Shutter ISO Metering Flash Focal Length White Balance EV Photo Size Date Icon 1 Playing videos 2 Information 3 Stop Play Description No. Description Current file/The total number of files 1 2 Captured photo Current file/The total number of files RGB histogram (p.
My Camera > Display icons Changing the information displayed Press [D] repeatedly to change the display type. Mode Display type • Basic shooting information (Shooting mode, Shutter speed, Aperture value, Exposure value, ISO sensitivity, etc.) Shooting Playback • Basic shooting information + Level gauge • Basic shooting information + Current shooting options information (Photo size, Drive mode, Flash, Metering, AF mode, etc.
My Camera Lenses You can purchase optional lenses made exclusively for your NX series camera. Learn about the functions of each lens and select one that suits your needs and preferences. Lens layout SAMSUNG 16-50 mm F3.5-5.6 Power Zoom ED OIS lens (example) 1 6 2 3 No. Description 1 2 3 4 i-Function button (p. 39) Lens mount index Focus ring Lens 5 Zoom button • Press the zoom button to adjust the zoom ratio. 6 Lens contacts* * Be careful not to directly touch or damage.
My Camera > Lenses Locking or unlocking the lens SAMSUNG 20-50 mm F3.5-5.6 ED II lens (example) 7 To lock the lens, pull and hold the zoom lock switch away from the camera body and rotate the zoom ring as shown in the illustration. 1 2 6 3 5 4 No. Description 1 2 Lens mount index 3 Lens 4 Focus ring (p. 82) 5 i-Function button (p. 39) 6 Zoom ring 7 Lens contacts* To unlock the lens, rotate the zoom ring as shown in the illustration until you hear the click.
My Camera > Lenses SAMSUNG 16 mm F2.4 lens (example) 5 1 2 3 4 No. Description 1 2 3 i-Function button (p. 39) 4 Lens 5 Lens contacts* Lens mount index Focus ring (p. 82) * Be careful not to directly touch or damage.
My Camera > Lenses Lens markings No. Find out what the numbers on the lens signify. 1 SAMSUNG 18-200 mm F3.5-6.3 ED OIS lens (example) Description Aperture value A range of supported aperture values. For example, 1:3.5–6.3 means the maximum aperture value range from 3.5 to 6.3. Focal length 2 The distance from the middle of the lens to its focal point (in millimeters). This figure is expressed in a range: minimum focal length to maximum focal length of the lens.
My Camera Accessories You can use accessories such as external flash that can help you capture better and more convenient photos. For more information about optional accessories, refer to the manual for each accessory. External flash layout SEF8A (example) 1 • The illustrations may differ from the actual items. • You can purchase Samsung-approved accessories at a retailer or a Samsung service center. Samsung is not responsible for damage caused by using another manufacturer's accessories. 2 3 No.
My Camera > Accessories Connecting the external flash 1 Mount the flash by sliding it into the hot-shoe. 2 Lock the flash into place by turning the hot-shoe fastening dial clockwise. 3 Lift up the flash for use. • You can capture a photo with a flash that is not fully charged, but it is recommended to use a fully charged flash. • The available options may differ depending on the shooting mode. • There is an interval between two bursts of the flash. Do not move until the flash fires a second time.
My Camera Shooting modes Two simple shooting modes—Smart Auto and Smart mode—help you capture photos with numerous automatic settings. Additional modes allow for greater customization of settings. Icon Description t Smart Auto mode (p. 52) P Program mode (p. 54) A Aperture Priority mode (p. 56) S Shutter Priority mode (p. 57) M Manual mode (p. 58) s Smart mode (p. 60) R Beauty Face mode (p. 63) B Wireless Network (p.
My Camera > Shooting modes t Smart Auto mode 1 Rotate the mode dial to t. In Smart Auto mode, the camera recognizes surrounding conditions and automatically adjusts factors that contribute to exposure, including shutter speed, aperture value, metering, White Balance, and exposure compensation. As the camera controls most of the functions, some shooting functions are limited. This mode is useful for capturing quick snapshots with the least amount of adjustment. 2 Align your subject in the frame.
My Camera > Shooting modes Recognizable scenes Icon Icon Description Description Forested areas typically consist of green-colored subjects Landscapes Close-up photos of colorful subjects Scenes with bright white backgrounds Camera is stabilized on a tripod and the subject is not moving for a certain period of time (when shooting in the dark).
My Camera > Shooting modes P Program mode 1 Rotate the mode dial to P. The camera automatically adjusts shutter speed and aperture value so that an optimal exposure value can be achieved. 2 Set the desired options. This mode is useful when you want to capture shots of constant exposure while being able to adjust other settings. 3 Half-press [Shutter] to focus, and then press [Shutter] to capture the photo.
My Camera > Shooting modes Program Shift Program Shift function lets you adjust the shutter speed and aperture value while the camera maintains the same exposure. Press [I] to select the shutter speed and aperture value and rotate the navigation button to adjust the aperture value. The shutter speed will change according to the aperture value. Minimum shutter speed Set the shutter speed not to be slower than the selected speed.
My Camera > Shooting modes A Aperture Priority mode 1 Rotate the mode dial to A. In Aperture Priority mode, the camera automatically calculates shutter speed according to the aperture value you choose. 2 Press [I] to select the aperture value. You can adjust the depth of field (DOF) by changing the aperture value. This mode is useful for taking portraits, flowers, or landscape shots. 3 Rotate the navigation button to adjust the aperture value. 4 Set the desired options.
My Camera > Shooting modes S Shutter Priority mode 1 Rotate the mode dial to S. In Shutter Priority mode, the camera automatically adjusts the aperture value according to the shutter speed you choose. This mode is useful for capturing photos of fast-moving subjects or for creating tracer effects in a photo. 2 Press [I] to select the shutter speed. 3 Rotate the navigation button to adjust the shutter speed. For example, set the shutter speed to over 1/500 s to freeze the subject.
My Camera > Shooting modes M Manual mode Manual mode lets you adjust the shutter speed and aperture value manually. In this mode, you can fully control the exposure of your photos. This mode is useful in controlled shooting environments, such as a studio, or when it is necessary to fine-tune camera settings. The Manual mode is also recommended for shooting night scenes or fireworks. 1 Rotate the mode dial to M. 2 Press [I] to select the aperture value or shutter speed.
My Camera > Shooting modes Using the Bulb function Use the Bulb function to shoot night scenes or the night sky. During the interval between the first [Shutter] press and the second [Shutter] press, the shutter is left open so you can create moving light effects. To use a bulb, In Shooting mode, press [I] to select the shutter speed → Completely rotate the navigation button counter-clockwise to set the shutter speed to Bulb → Press [Shutter] to start shooting → Press [Shutter] again to stop shooting.
My Camera > Shooting modes s Smart mode In Smart mode, you can capture photos with options that are preset for a specific scene. 1 2 Rotate the mode dial to s. Select a scene. Option Description Best Face Capture multiple photos and replace faces to create the best possible image. Continuous Shot Capture a series of photos of moving subjects. Kids Shot Capture a photo with a funny sound to get a kid's attention. Landscape Capture still-life scenes and landscapes.
My Camera > Shooting modes Using the Best Face mode 5 • Repeat steps 4 and 5 to replace the rest of the faces in the photo. In Best Face mode, you can capture multiple photos and replace faces to create the best possible image. Use this mode to select the best image for each individual when capturing group photos. 1 Rotate the mode dial to s, and then select Best Face. 2 Align your subject in the frame, and then half-press [Shutter] to focus. 3 Press [Shutter] to capture the photo.
My Camera > Shooting modes Using the Panorama mode In Panorama mode, you can capture a wide panoramic scene in a single photo. Panorama mode captures and combines a series of photos to create a panoramic image. 1 Rotate the mode dial to s, and select Panorama. 2 Press and hold [Shutter], and then slowly move the camera in the direction you selected. • An arrow toward the direction of motion is displayed, and the entire shooting image is displayed in the preview box.
My Camera > Shooting modes R Beauty Face mode 5 In Beauty Face mode, you can capture a portrait with options to hide facial imperfections. 1 Rotate the mode dial to R. 2 Press [m]. 3 Select b → Face Retouch. 4 Press [D/I] to select the desired option. Face Retouch : Brightening 7 Brightening Softening Back 7 Rotate the navigation button or press [C/F] to adjust the desired setting. • For example, increase the face retouch setting to hide more imperfections or to make skin appear lighter.
My Camera > Shooting modes Recording a video In Shooting mode, you can record Full HD videos (1920X1080) by pressing (Video recording). The camera lets you record a video up to 20 minutes in length at 30 fps, and saves the files in MP4 (H.264) format. The sound is recorded via the camera's microphone. When you use a lens that does not have an AF/MF switch while recording a video, press [F] to deactivate or activate the AF function.
My Camera > Shooting modes • H.264 (MPEG-4 part10/AVC) is the latest video coding format established • • • • • • • • • • • in 2003 collaboratively by ISO-IEC and ITU-T. Since this format uses a high compression rate, more data can be saved in less memory space. If you have the image stabilizer option on when shooting a movie, the camera may record the image stabilizer sound. The zoom sound or other lens sounds may be recorded if you adjust the lens while recording a video.
My Camera > Shooting modes Available functions by shooting mode For details about shooting functions, see Chapter 2. Function Photo Size (p. 68) Quality (p. 69) ISO (p. 70) White Balance (p. 71) Picture Wizard (p. 73) Smart Filter (p. 95) AF Mode (p. 74) AF Area (p. 77) MF Assist (p. 82) Link AE to AF Point (p. 93) Framing Mode (p. 58) Available in P/A/S/M/s*/R/t P/A/S/M/s*/R* P/A/S/M P/A/S/M P/A/S/M P/A/S/M P/A/S/M/s*/R* P/A/S/M/s* P/A/S/M/s/R/t P/A/S/M Function Available in OIS (Anti-Shake) (p.
Chapter 2 Shooting Functions Learn about the functions you can set in Shooting mode. You can enjoy more customized photos and videos by using the shooting functions.
Shooting Functions Size and Resolution Photo size * Default Icon As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the file size will also increase. Select a low resolution for photos that will be displayed in a digital picture frame or uploaded to the web. To set the size, In Shooting mode, press [m] → b → Photo Size → an option.
Shooting Functions > Size and Resolution Quality * Default Icon Format Description RAW • Save a photo without data loss. • Recommended for editing after shooting. The camera saves photos in either the JPEG or RAW format. RAW: Photos captured by a camera are often transformed to the JPEG format and stored in the memory according to the settings of the camera at the time of shooting. RAW files are not transformed to the JPEG format and are stored in the memory without any changes.
Shooting Functions ISO sensitivity The ISO sensitivity value represents the sensitivity of camera to light. Examples The larger the ISO value, the more sensitive the camera is to light. Consequently, by selecting a higher ISO sensitivity value, you can capture photos in dim or dark places at faster shutter speeds. However, this may increase electronic noise and result in a grainy photo. To set ISO sensitivity, In Shooting mode, press [m] → b → ISO → an option.
Shooting Functions White Balance White Balance represents the light source that influences on the color of a photo. The color of a photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select an appropriate lighting condition to calibrate the White Balance, such as Auto WB, Daylight, Cloudy, Tungsten, or adjust color temperature manually.
Shooting Functions > White Balance Customizing preset White Balance options Examples You can also customize preset White Balance options. To customize preset options, In Shooting mode, press [m] → b → White Balance → an option → [D] → Press [D/I/C/F].
Shooting Functions Picture Wizard (photo styles) Picture Wizard lets you apply different photo styles to your photo to create various looks and emotional moods. You can also create and save your own photo styles by adjusting color, saturation, sharpness, and contrast for each style. There is no rule for which style is suitable in which conditions. Experiment with different styles and find your own settings. To set a photo style, In Shooting mode, press [m] → b → Picture Wizard → an option.
Shooting Functions AF mode Learn how to adjust the camera’s focus according to the subjects. You can select a focusing mode appropriate to the subject among Single Auto Focus, Continuous Auto Focus, and Manual Focus. The AF function is activated when you press [Shutter] halfway. In the MF mode, you have to rotate the focus ring on the lens to focus manually. In most cases, you can have a focus by selecting Single AF.
Shooting Functions > AF mode Single AF Continuous AF Single AF is appropriate for shooting a still subject. When you press [Shutter] halfway, the focus fixes in the focus area. The area turns green when the focus is achieved. While you are pressing [Shutter] halfway, the camera continues to automatic focusing. This mode is recommended for shooting a person on a bicycle, a running dog, or a car racing scene.
Shooting Functions > AF mode Manual focus You can manually focus on a subject by rotating the focus ring on the lens. The MF Assist function lets you easily achieve a focus. While you are rotating the focus ring, the focus area is magnified. This mode is recommended for shooting an object similar in color to the background, a night scene, or fireworks. • If you use this function, you cannot set Face Detection, AF Area, and Link AE to AF Point options.
Shooting Functions AF area The AF area function changes the positions of the focus area. Selection AF Generally, cameras focus on the nearest subject. When there are a lot of subjects, however, unwanted subjects can be in focus. In order to prevent unwanted subjects from being in focus, change the focus area so that a desired subject is in focus. You can get a clearer and sharper photo by selecting an appropriate focus area. You can set the focus on an area you want.
Shooting Functions > AF area Multi AF Tracking AF The camera displays a green rectangle in places where focus is set correctly. The photo is divided into two or more areas, and the camera obtains focus points of each area. It is recommended for scenery photos. Compose your shot and press [o] to focus on the subject. Tracking AF allows you to track and automatically focus on your subject, even when the subject is moving or when you change the shooting composition.
Shooting Functions > AF area • If you do not select a focus area, the focus frame will appear in the center of the screen.
Shooting Functions Face Detection Use Face Detection options to capture a self portrait or a smiling face. To use the face detection function, In Shooting mode, press [m] → b → Face Detection → an option. • When your camera detects a face, it tracks the detected face automatically. • Depending on the Picture Wizard options, Face Detection may not be effective. • When you set manual focus, Face Detection may not be available.
Shooting Functions > Face Detection Smile Shot Wink Shot The camera automatically releases the shutter when it detects a smiling face. The camera automatically releases the shutter 2 seconds after it detects a winking face. When your subject smiles broadly, your camera can detect the smile more easily. • Wink for more than 1 second for better detection.
Shooting Functions MF Assist In the manual focus mode, you have to rotate the focus ring on the lens to focus. When you use the MF Assist function, you can enlarge the scene and easily adjust the focus while rotating the focus ring. This function is only available on a lens that supports manual focus. To set the manual focus assist, In Shooting mode, press [m] → b → MF Assist → an option. * Default Icon Description Off: Do not use the MF Assist function.
Shooting Functions Optical Image Stabilization (OIS) Use the Optical Image Stabilization (OIS) function to minimize camera shake. OIS may not be available with some lenses. Camera shake tends to occur in dark places or when shooting indoors. In such cases, the camera uses slower shutter speeds in order to increase the amount of light taken in, which can result in a blurry photo. You can prevent this situation by using the OIS function.
Shooting Functions Drive (shooting method) You can set the shooting method, such as Continuous, Burst, Timer, or Bracketing. Select Single to capture one photo at a time. Select Continuous or Burst to shoot fast moving subjects. Select AE Bracket, WB Bracket, P Wiz Bracket, or Depth Bracket to adjust exposure, White Balance, apply picture Wizard effects, or capture photos with different depths of field. You can also select Timer to capture a photo automatically after a specified time.
Shooting Functions > Drive (shooting method) Continuous Burst Continuously capture photos while you are pressing [Shutter]. You can capture up to 5 photos per second. Consecutively capture up to 10 shots per second (3 seconds), 15 shots per second (2 seconds), or 30 shots per second (1 second) when you press [Shutter] once. It is recommended for shooting the rapid motion of fast moving subjects such as racing cars.
Shooting Functions > Drive (shooting method) Timer Auto Exposure Bracketing (AE Bracket) Capture a photo after a specified time. You can set the Timer for 2 to 30 seconds. When you press [Shutter], the camera captures 3 consecutive photos: the original, one a step darker, and one a step lighter. Use a tripod to prevent blurry photos as the camera captures three photos continuously. You can adjust the settings in Bracket Settings menu.
Shooting Functions > Drive (shooting method) White Balance Bracketing (WB Bracket) Picture Wizard Bracketing (P Wiz Bracket) When you press [Shutter], the camera captures 3 consecutive photos: the original and two more with different White Balance settings. The original photo is captured when you press [Shutter]. The other two are automatically adjusted according to the White Balance you have set. You can adjust the settings in Bracket Settings menu.
Shooting Functions > Drive (shooting method) Depth Bracketing When you press [Shutter], the camera captures 3 consecutive photos, each with a different depth of field by adjusting the aperture value. Use a tripod to prevent blurry photos as the camera captures three photos continuously. You can adjust the settings in Bracket Settings menu. • To set the bracketing details, press [m] → d → Bracket Settings → an option. • This feature is available only in Program or Aperture Priority mode.
Shooting Functions Flash In order to capture a realistic photo of a subject, the amount of light should be constant. When the light source varies, you can use a flash and supply a constant amount of light. Select appropriate settings according to a light source and a subject. To set flash options, Icon In Shooting mode, press [m] → b → Flash → an option. A Description 2nd Curtain: The flash fires just before the shutter closes.
Shooting Functions > Flash Reducing the red-eye effect Adjusting the flash intensity If the flash fires when you capture a photo of a person in the dark, a red glow may appear in the eyes. To reduce the red-eye effect, select Auto Red-eye or Fill-in Red. When the flash is on, adjust the flash intensity ±2 levels. To set the flash intensity, In Shooting mode, select [m] → b → Flash → an option → [D] → Rotate the navigation button or press [C/F] to adjust the flash intensity.
Shooting Functions Metering The metering mode refers to the way in which a camera measures the quantity of light. The camera measures the amount of light in a scene, and in many of its modes, uses the measurement to adjust various settings. For example, if a subject looks darker than its actual color, the camera captures an overexposed photo of it. If a subject looks lighter than its actual color, the camera captures an underexposed photo of it.
Shooting Functions > Metering Center-weighted Spot The Center-weighted mode calculates a broader area than the Spot mode does. It sums up the amount of light in the center portion of the shot (60–80 %) and that of the rest of the shot (20–40 %). It is recommended for situations where there is a slight difference in brightness between a subject and a background or an area of the subject is large compared to the overall composition of the photo. The Spot mode calculates the amount of light in the center.
Shooting Functions > Metering Measuring the exposure value of the focus area When this function is turned on, the camera automatically sets an optimal exposure by calculating the brightness of the focus area. This function is only available when you select Spot metering or Multi metering, and Selection AF. To set this function, In Shooting mode, press [m] → b → Link AE to AF Point → an option.
Shooting Functions Dynamic Range This function automatically corrects the loss of bright detail that can occur due to shading differences in the photo. * Default Icon Description Off*: Do not use Dynamic Range. To set Dynamic Range options, In Shooting mode, press [m] → b → Dynamic Range → an option. Smart Range+: Correct the loss of bright detail. HDR: Capture 3 photos with different exposures, and then combine them to create a single image automatically.
Shooting Functions Smart Filter Smart Filter lets you apply special effects to your photos or videos. You can select various filter options to create special effects that are difficult to be achieved with normal lenses. To set Smart Filter options, In Shooting mode, press [m] → b → Smart Filter → an option. * Default Option Description Off* No effect Vignetting Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.
Shooting Functions Exposure compensation The camera automatically sets the exposure by measuring the levels of light from the photo’s composition and the position of a subject. If the exposure set by the camera is higher or lower than you expected, you can adjust the exposure value manually. The exposure value is adjustable in ±3 increments. The camera displays the exposure warning in red for each step beyond ±3 range. To adjust the exposure value, press [f], and then select EV.
Shooting Functions Exposure lock When you cannot achieve an appropriate exposure because of a strong brightness contrast, lock the exposure and then capture a photo. After locking the exposure, aim the lens where you desire, and then press [Shutter]. To lock the exposure, adjust the photo’s composition on which you want to calculate the exposure, and then press the Custom button. (when the function of the Custom button is set to AEL) (p.
Shooting Functions Video functions When Video Out is set to PAL The functions available for video are explained below. * Default Icon Movie size * Set the movie size. To set movie size options, In Shooting mode, press [m] → g → Movie Size → an option. Size Recommended for 1920X1080 (25 fps) (16:9) View on a Full HDTV. 1280X720 (25 fps) (16:9) View on an HDTV. 640X480 (25 fps) (4:3) View on a TV. 320X240 (25 fps) (4:3) Post on a website using the wireless network (30 seconds maximum).
Shooting Functions > Video functions Movie quality Multi Motion Set the Movie quality. Set the playing speed of a video. To set movie quality options, In Shooting mode, press [m] → g → Movie Quality → an option. To set playing speed options, In Shooting mode, press [m] → g → Multi Motion → an option. * Default Icon Extension Description MP4 (H.264) Normal: Record videos in normal quality. MP4 (H.264) HQ*: Record videos in high quality. * Default Icon Description x0.
Shooting Functions > Video functions Fader Voice You can fade in or fade out a scene using the fader function on the camera without having to do it on a PC. Set the fade in option to gradually fade in at the start of the scene. Set the fade out option to gradually fade out the scene. Use the function appropriately and add dramatic effects on your videos. Sometimes, a muted video is more appealing than the one with sound. Turn the voice off to record a muted video.
Chapter 3 Playback/Editing Learn about how to play back and edit photos and videos. Refer to chapter 6 for editing files on a PC.
Playback/Editing Searching and managing files Learn how to view photo and video thumbnails and how to protect or delete files. If you perform no operations for a while, information and icons on the screen disappear. When you operate the camera again, they will reappear. Viewing image thumbnails In order to search for photos and videos you want, convert to the thumbnail view by pressing [I] in Playback mode.
Playback/Editing > Searching and managing files Viewing files by category 1 Viewing files as a folder In the thumbnail view, press [m] → y → Filter → a category. * Default Option Description All* View files normally. Date View files by the date they were saved. File Type View files by the file type. 2 Select a list to open it. 3 Select a file to view it. Continuous and burst shots appear as a folder. Selecting a folder will play back all photos automatically.
Playback/Editing > Searching and managing files Protecting files Deleting files Protect your files from accidental deletion. Delete files in Playback mode and secure more space on your memory card. Protected files are not deleted. 1 In Playback mode, scroll to a file. 2 Press [m] → y → Protect → On. Deleting a single file You can select a single file and delete it. • You cannot delete or rotate a protected file.
Playback/Editing > Searching and managing files Deleting multiple files You can select multiple files and delete them. 1 You can delete all files on the memory card at once. In Playback mode, press [m] → y → Delete → Multiple Delete. 1 In Playback mode, press [m]. • Alternatively, in thumbnails view, press [n], and then select files to 2 Select y → Delete → Delete All. 3 When the pop-up message appears, select Yes. delete.
Playback/Editing Viewing photos Enlarging a photo Viewing a slide show You can enlarge photos when viewing them in Playback mode. Press [o], and then rotate the navigation button to enlarge or reduce a photo. Press [D/I/C/F] to move the magnified area. You can also use the Trim function to extract the portion of the image displayed on the screen and save it as a new file. You can view photos in a slide show and apply various effects to the slide show.
Playback/Editing > Viewing photos 4 Press [m]. Auto rotating 5 Select Start Slide Show. With Auto Rotate on, the camera automatically rotates photos you have captured vertically so they fit the screen horizontally. 6 View the slide show. • Press [o] to pause. To set auto rotate options, In Playback mode, press [m] → y → Auto Rotate → an option. • Press [o] again to resume. • Press [m] to stop the slide show and return to Playback mode.
Playback/Editing Playing videos In Playback mode, you can play a video, capture an image from a video, or crop a video to save as another file. Stop To Play Description Trimming a video during playback 1 In Playback mode, scroll to a video, and then press [m]. 2 Select Trim Movie. 3 Press [o] to start playing the video. 4 Press [o] at the point where you want the trimming to begin. 5 Press [f]. 6 Press [o] to resume playing the video.
Playback/Editing > Playing videos 8 Press [f]. Capturing an image during playback 9 Press [f] to trim a video. 1 While viewing a video, press [o] at the point where you want to capture an image. 2 Press [f]. 10 When the pop-up message appears, select Yes. • The original video should be at least 10 seconds long. • The camera will save the edited video as a new file and leave the original video intact.
Playback/Editing Editing photos Edited photos are saved as new files under different file names. Photos captured in some modes cannot be edited with the Image Edit function. To edit images, In Playback mode, scroll to a photo, and then press [m] → y → Edit Image → an option. Rotating a photo 1 Select 2 Select an option. → . • Some images may not be edited with the Edit Image function. In this case, use other image editing software.
Playback/Editing > Editing photos Resizing photos Adjusting your photos Change the size of a photo and save it as a new file. You can correct captured photos by adjusting the brightness, contrast, or color. 1 Select 2 Select an option. → . 1 Select . 2 Select an adjusting option. • If you selected (Auto adjustment), the adjusted photo will be saved automatically. Resize : 3888 x 2592 Icon Description Original (Reset to the original image) Cancel 3 Save Press [o] to save.
Playback/Editing > 3 Editing photos Rotate the navigation button or press [C/F] to adjust the option. 4 Press [o]. 5 Press [m]. 6 Press [f] to save. Retouching faces 1 Select 2 Rotate the navigation button or press [C/F] to adjust the option. → . • As the number increases, the skin tone becomes brighter and smoother. 3 Press [o] to save.
Playback/Editing > Editing photos Applying Smart Filter effects Option Description Apply special effects to your photos. Fish-eye Distort close objects to imitate the visual effect of a fisheye lens. Classic Apply a black and white effect. Retro Apply a sepia tone effect. Oil Painting Apply an oil painting effect. Cartoon Apply a cartoon effect. Ink Painting Apply ink sketching effect.
Chapter 4 Wireless network Learn how to connect to wireless local area networks (WLANs) and use functions.
Wireless network Connecting to a WLAN and configuring network settings Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings. Icon Description Ad hoc AP Secured AP WPS AP Connecting to a WLAN Signal strength 1 Rotate the mode dial to B. 2 Select 3 Follow the on-screen instructions until the Wi-Fi Setting screen appears.
Wireless network > Connecting to a WLAN and configuring network settings Setting network options Manually setting the IP address 1 In the Wi-Fi Setting screen, move to an AP, and then press [F]. 1 In the Wi-Fi Setting screen, move to an AP, and then press [F]. 2 Select each option, and then enter the required information. 2 Select IP Setting → Manual. 3 Select each option, and then enter the required information. Option Description Network Password Enter the network password.
Wireless network > Connecting to a WLAN and configuring network settings Network connection tips • Some Wi-Fi features are not available if you do not insert a memory card. • The quality of the network connection will be determined by the AP. • The further the distance between your camera and the AP, the longer it will take to connect to the network. • If you cannot connect to a WLAN, try another AP from the available AP list. • Available network connections may differ by country.
Wireless network > Connecting to a WLAN and configuring network settings Entering text Icon Description Delete the last letter. Learn how to enter text. Rotate the navigation button or press [D/I/C/F] to scroll to a key and press [o] to enter it. Move the cursor. In ABC mode, change the case. Switch between Symbol mode and ABC mode. Enter a space. Done Done Back Backspace Save the displayed text. • Press [y] to move to Done directly.
Wireless network Using the NFC Feature (Tag & Go) Place a smart phone's NFC antenna near the camera’s NFC tag to launch the feature for saving photos to a smart phone automatically or the feature for using a smart phone as a remote shutter. You can also transfer files to an NFC-enabled device in Playback mode. • This feature is supported by NFC-enabled smart phones running Android OS. • • • • • It is recommended that you use the latest version. This feature is not available for iOS devices.
Wireless network Saving files to a smart phone automatically The camera connects to a smart phone that supports the AutoShare feature via a WLAN. When you capture a photo with your camera, the photo is saved to a smart phone automatically. 1 • If the pop-up message that prompts you to download the application appears, select Next. • To require PIN verification when connecting the smart phone to the • The AutoShare feature is supported by smart phones or tablets running • • • • Android OS or iOS.
Wireless network > 4 Saving files to a smart phone automatically On the camera, allow the smart phone to connect to your camera. • If the smart phone has been connected to your camera before, it is connected automatically. • An icon that shows the connection status ( camera’s screen. 5 ) will appear on the Capture a photo. • The captured photo is saved to the camera, and then transferred to the smart phone.
Wireless network Sending photos or videos to a smart phone The camera connects to a smart phone that supports the MobileLink feature via a WLAN. You can easily send photos or videos to your smart phone. 1 Rotate the mode dial to B. 2 On the camera, select • If the pop-up message that prompts you to download the • The MobileLink feature is supported by smart phones or tablets running • • • • • • • • • • Android OS or iOS. (Some features may not be supported by some models.
Wireless network > 5 Sending photos or videos to a smart phone Select the camera from the list and connect the smart phone to the camera. • The smart phone can connect to only one camera at a time. • If the Wi-Fi Privacy lock is enabled, enter the PIN displayed on the camera to the smart phone. 6 On the camera, allow the smart phone to connect to your camera. • If the smart phone has been connected to your camera before, it is connected automatically.
Wireless network Sending photos or videos to multiple smart phones The camera connects to a smart phone that supports the Group Share feature via a WLAN. You can easily send photos or videos to multiple smart phones. 1 Rotate the mode dial to B. 2 On the camera, select • If the pop-up message that prompts you to download the • The Group Share feature is supported by smart phones or tablets running • • • • • • • • • Android OS or iOS. (Some features may not be supported by some models.
Wireless network > 4 Sending photos or videos to multiple smart phones Select the smart phone from the list. • If the smart phone has been connected to your camera before, it is connected automatically. • You can connect to up to 4 smart phones. • If the Wi-Fi Privacy lock is enabled, enter the PIN displayed on the camera to the smart phone. 5 Select Next. 6 On camera, select files to transfer from the camera. 7 On the camera, select Send. • The camera will send the files to the smart phone.
Wireless network Using a smart phone as a remote shutter release The camera connects to a smart phone that supports the Remote Viewfinder feature via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewfinder feature. The captured photo will display on the smart phone. 1 Rotate the mode dial to B. 2 On the camera, select • If the pop-up message that prompts you to download the application appears, select Next.
Wireless network > 5 Using a smart phone as a remote shutter release On the camera, allow the smart phone to connect to your camera. • If the smart phone has been connected to your camera before, it is connected automatically. 6 On the smart phone, select q to open the smart panel. 7 On the smart phone, set the shooting options. On the smart phone, touch and hold release it to capture the photo. • Touch to record a video and touch to focus, and then to stop a video.
Wireless network Using Auto Backup to send photos or videos You can send photos or videos that you captured with the camera to a PC wirelessly. Installing the program for Auto Backup on your PC Sending photos or videos to a PC 1 Rotate the mode dial to B. 2 Select . • If the pop-up message that prompts you to download the application appears, select Next. 1 Install i-Launcher on the PC. (p.
Wireless network > 4 Using Auto Backup to send photos or videos Select OK. • To cancel sending, select Cancel. • You cannot select individual files to backup. This function backs up only new files on the camera. • The backup's progress will be shown on the PC monitor. • When the transfer is completed, the camera will turn off automatically in approximately 30 seconds. Select Cancel to return to the previous screen and prevent the camera from turning off automatically.
Wireless network Using Samsung Link to view files You can view files on a Samsung Link device connected to the same AP. 1 Rotate the mode dial to B. 2 Select . • The camera will automatically attempt to connect to a WLAN via the most recently connected AP device. • If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 115) 5 On the Samsung Link device, select a camera to connect to.
Wireless network > Using Samsung Link to view files • You can share up to 1,000 recent files. • On a Samsung Link device, you can view only photos or videos captured with • • • • • • • • • • your camera. The range of the wireless connection between your camera and a Samsung Link device may vary depending on the specifications of the AP. If the camera is connected to 2 Samsung Link devices, playback may be slower. Photos or videos will be shared in their original sizes.
Chapter 5 Camera settings menu Learn about the user settings and general settings menu. You can adjust the settings to better suit your needs and preferences.
Camera settings menu User settings You can set the user environment with these settings. To set user options, In Shooting mode, press [m] → d → an option. Noise Reduction Use the Noise Reduction to reduce the visual noise in photos. * Default Available items and the order of them may differ depending on shooting conditions. Option Description High ISO NR This function reduces noise that may occur when you set a high ISO sensitivity.
Camera settings menu > User settings Bracket Settings DMF (Direct Manual Focus) You can set up the options for each bracketing. You can adjust the focus manually by rotating the focus ring after achieving the focus by half-pressing [Shutter]. This feature may not be available with some lenses. * Default Option Description AE Bracket Settings Set the exposure interval. (-/+0.3 EV*, -/+0.7 EV, -/+1.0 EV, -/+1.3 EV, -/+1.7 EV, -/+2.0 EV, -/+2.3 EV, -/+2.7 EV, -/+3.
Camera settings menu > User settings Color Space The color space option allows you to select methods for representing colors. Digital imaging devices such as digital cameras, monitors, and printers have their own methods for representing colors, which are called color spaces. Adobe RGB * Default Option Description sRGB* sRGB (Standard RGB) is an international specification to define the color space created by IEC (International Electrotechnical Commission).
Camera settings menu > User settings Distortion Correct iFn Customizing You can correct lens distortion that might occur from lenses. This feature is available with lenses that support it. You can select options that can be adjusted when you press [i-Function] on an i-Function lens. Option Description Aperture Set to adjust the aperture value. Shutter Speed Set to adjust the shutter speed. EV Set to adjust the exposure value. ISO Set to adjust ISO sensitivity.
Camera settings menu > User settings User Display No. You can add or remove shooting information from the display. 1 Icons 2 Date & Time 1 2 Description Set to display icons on the right in Shooting mode. Set to display the date and time. Histogram Set the histogram on the display on or off. 3 3 About histogram A histogram is a graph that shows the brightness distribution of a photo. A histogram inclined to the left indicates a dark photo.
Camera settings menu > User settings Key Mapping Live view NFC You can change the function assigned to the Custom button. In Shooting mode, turn on the NFC feature on an NFC-enabled smart phone and place the smart phone's NFC antenna near the camera’s NFC tag to launch AutoShare or Remote Viewfinder. This feature is supported by NFC-enabled smart phones running Android OS. It is recommended that you use the latest version. This feature is not available for iOS devices.
Camera settings menu > User settings Grid Line Auto Self-Shot Select a guide to help you compose a scene. (Off*, 4 X 4, 3 X 3, Cross, Diagonal) Set to turn on the camera and enter Self shot mode automatically when you flip the display upward. In Self shot mode, the timer (3 seconds), face detection, and beauty face options are automatically activated. AF Lamp When shooting in dark places, turn the AF lamp on in order to have a better auto focus.
Camera settings menu Setting Learn to configure your camera's settings. * Default Item To set Setting options, In Shooting or Playback mode, press [m] → q → an option. * Default Item Description • System Volume: Set the sound volume or turn all sound off entirely. (Off, Low, Medium*, High) Sound Even if the system volume is turned off, the camera emits the sound while playing a video or a slide show. Display Adjust in Playback mode. half-press the shutter button on or off.
Camera settings menu > Setting * Default Item Description * Default Item Set power shut off time. The camera shuts off if you do not use it for the time you set. (Off, 1 min*, 3 min, 5 min, 10 min, 30 min) Auto Power Off • The camera retains the power-off time setting even if Set date, time, date format, time zone and whether to imprint the date on photos. (Time Zone, Date/Time Set, Date Type, Time Type, Imprint) Date & Time you replace the battery.
Camera settings menu > Setting * Default Item Description HDMI Output When you connect the camera to an HDTV with an HDMI cable, you can change the resolution of the image. • NTSC: Auto*, 1080i, 720p, 480p, 576p (activates only when PAL is selected) * Default Item Set the method of numbering files and folders. • Reset: After using the reset function, the next file name is started at 0001.
Camera settings menu > Setting * Default Item Description * Default Item Format the memory card. Formatting deletes all existing files including protected files. (No*, Yes) Format Errors can occur if you use a memory card formatted by another brand of camera, a memory card reader, or a computer. Please format memory cards in the camera before using them to capture photos. Set to require a PIN when connecting the camera and a smart phone. • PIN: Enter a PIN before connecting.
Chapter 6 Connecting to external devices Make full use of the camera by connecting it to external devices such as a computer or HDTV.
Connecting to external devices Viewing files on an HDTV Play back photos or videos by connecting your camera to an HDTV using an optional HDMI cable. 1 In Shooting or Playback mode, press [m] → q → HDMI Output → an option. (p. 142) 2 Turn off your camera and HDTV. 3 Connect your camera to your HDTV with the optional HDMI cable. 4 Turn on your HDTV, and then select the HDMI video source. 5 Turn on the camera. • The camera automatically enters into Playback mode when you connect it to an HDTV.
Connecting to external devices Transferring files to your computer Transfer files on a memory card to your computer by connecting the camera to the PC. Transferring files to your Windows OS computer Connecting the camera as a removable disk You can connect the camera to your computer as a removable disk. Open the removable disk and transfer files to your computer. 1 Turn off the camera. 2 Connect the camera to your computer with the USB cable. 3 Turn on the camera.
Connecting to external devices > Transferring files to your computer Disconnecting the camera (for Windows 7) Transferring files to your Mac OS With Windows 8, the methods for disconnecting the camera are similar. 1 Mac OS 10.7 or later is supported. Ensure that no data is being transferred between the camera and the computer. • If the status lamp on your camera is blinking, it means the data transfer is in progress. Please wait until the status lamp stops blinking.
Connecting to external devices > 3 Transferring files to your computer Turn on the camera. • The computer recognizes the camera automatically and displays a removable disk icon. 4 On your computer, open the removable disk. 5 Transfer photos or videos to the Mac OS computer.
Connecting to external devices Using programs on a PC You can view and edit files using the provided programs. You can also send the files to a PC wirelessly. 4 Install i-Launcher on the PC. OS How to Install Windows When the pop-up window prompts you to install i-Launcher, select Yes. • If the pop-up window does not appear, select My Computer → i-Launcher → iLinker.exe. • If a pop-up window prompting you to run iLinker.exe appears, run it first.
Connecting to external devices > Using programs on a PC Using Samsung i-Launcher Using i-Launcher Icon i-Launcher allows you update the firmware of the camera or the lens or provides a link to download the PC Auto Backup program. Description You can download the firmware of your camera. Download the User Manual. Requirements for Windows OS Download this program to convert Samsung RAW files (SRW) to DNG files.
Connecting to external devices > Using programs on a PC • The requirements on the following page are recommendations only. i-Launcher may not work properly even when the computer meets the requirements, depending on the condition of your computer. • If your computer does not meet the requirements, videos may not play correctly. The manufacturer is not responsible for any damage that results from using unqualified computers such as a computer you assembled yourself.
Chapter 7 Appendix Get information about error messages, camera maintenance, trouble shooting tips, specifications, and optional accessories.
Appendix Error messages When the following error messages appear, try these remedies. Error messages Suggested remedies Lens is locked The lens is locked. Rotate the lens counterclockwise until you hear a click. (p. 46) Card Error • Turn off the camera, and then turn it on again. • Remove the memory card and insert it again. • Format the memory card. Low Battery Insert a charged battery or recharge the battery. No Image File Capture photos or insert a memory card that contains photos.
Appendix Maintaining the camera Cleaning the camera Camera lens and display Use a brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of cleaning paper and wipe gently. Image sensor Depending on different shooting conditions, dust may appear in photos because the image sensor is exposed to the external environment. This problem is normal, and the exposure to dust occurs in everyday use of the camera.
Appendix > Maintaining the camera Using or storing the camera Using on beaches or shores • Protect your camera from sand and dirt when you use it on beaches or in Inappropriate places to use or store the camera • Avoid exposing the camera to very cold or very hot temperatures. other similar areas. • Your camera is not waterproof. Do not handle the battery, adapter, or • Avoid using your camera in areas with extremely high humidity, or memory card with wet hands.
Appendix > Maintaining the camera Using the camera with caution in humid environments When you transfer the camera from a cold environment to a warm one, condensation can form on the lens or internal components of the camera. In this situation, turn off the camera and wait for at least 1 hour. If condensation forms on the memory card, remove the memory card from the camera and wait until all moisture has evaporated before reinserting it. Other cautions • Do not swing your camera by the strap.
Appendix > Maintaining the camera About memory card Supported memory card This product supports microSD, microSDHC, or microSDXC memory cards. Memory card adapter Memory card To read data with a PC or memory card reader, insert the memory card into a memory card adapter.
Appendix > Maintaining the camera Memory card capacity The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 2 GB SD card. Quality Size Photo Super Fine Fine Normal RAW RAW + S.Fine RAW + Fine RAW + Normal 20.0M (5472X3648) 162 294 403 57 26 32 35 10.1M (3888X2592) 292 492 638 - 32 37 39 5.9M (2976X1984) 440 688 846 - 36 40 41 2.
Appendix > Maintaining the camera Size 1920X1080 (30 fps) Video 1280X720 (30 fps) 640X480 (30 fps) For Sharing (30 fps) • • • • • Cautions when using memory cards Quality HQ Normal Approx. 17' 02" Approx. 19' 50" Approx. 23' 46" Approx. 29' 37" • Insert a memory card in the correct direction. Inserting a memory card in Approx. 58' 24" Approx. 77' 06" • Do not use memory cards that have been formatted by other cameras or - Approx.
Appendix > Maintaining the camera • Prevent memory cards from making contact with liquids, dirt, or foreign substances. If dirty, wipe the memory card clean with a soft cloth before you insert the memory card in your camera. About the battery Use only Samsung-approved batteries. • Do not allow liquids, dirt, or foreign substances to come in contact with memory cards or the memory card slot. Doing so may cause memory cards or the camera to malfunction.
Appendix > Maintaining the camera Personal injury or death can occur if the battery is handled carelessly or improperly. For your safety, follow these instructions for proper battery handling: • The battery can ignite or explode if not handled properly. If you notice • • • • • • • • any deformities, cracks, or other abnormalities in the battery, immediately discontinue use of the battery and contact your manufacturer.
Appendix > Maintaining the camera Battery life Notes about using the battery Shooting mode Average time / Number of photos Photos Approx. 185 min./Approx. 370 photos Videos Approx. 135 min. (Record videos at 1920X1080 resolution and 30 fps.) • The figures above are based on the CIPA test standards. Your results may differ depending on your actual usage. • Available shooting time differs depending on background, shooting interval, and use conditions.
Appendix > Maintaining the camera Cautions about using the battery Protect batteries, chargers, and memory cards from damage. Prevent batteries from making contact with metal objects, as this can create a connection between the + and – terminals of your battery and lead to temporary or permanent battery damage and may cause a fire or electric shock. Notes about charging the battery • If the status lamp is off, ensure that the battery is inserted correctly.
Appendix > Maintaining the camera Notes about charging with a computer connected • Use only the provided USB cable. • The battery may not charge when: -- you use a USB hub -- other USB devices are connected to your computer -- you connect the cable to the port on the front side of your computer -- the USB port of your computer does not support the power output standard (5 V, 500 mA) Handle and dispose of batteries and chargers with care • Never dispose of batteries in a fire.
Appendix Updating the firmware Connect the camera to the computer and update the firmware of the camera of the lens. • You cannot run a firmware upgrade without a fully charged battery. Recharge the battery fully before running a firmware upgrade. • If you update the firmware, user settings and values will be reset. (Date, time, 3 Turn on the camera. 4 On the computer, select i-Launcher → 5 Follow the on-screen instructions to download the firmware to the camera.
Appendix Before contacting a service center If you are having trouble with your device, try these troubleshooting solutions before contacting a service professional. Situation Suggested remedies • There is no space on the memory card. Delete unnecessary files or insert a new card. When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Appendix > Before contacting a service center Situation The memory card has an error Suggested remedies Situation • Turn off the camera, and then turn it on again. • Remove the memory card, and then insert it again. • Format the memory card. See "Cautions when using memory cards" for more details. (p. 159) Your TV or computer cannot display photos and videos that are stored on a microSDXC memory card microSDXC memory cards use the exFAT file system.
Appendix > Before contacting a service center Situation Your computer does not recognize your camera Your computer disconnects the camera while transferring files Suggested remedies • Ensure that the USB cable is connected correctly. • Ensure that the camera is switched on. • Ensure that you are using a supported operating system. The file transfer may be interrupted by static electricity. Disconnect the USB cable and connect it again. • End i-Launcher and restart the program.
Appendix Camera specifications Image Sensor Display Type CMOS Type TFT LCD Sensor size 23.5 mm X 15.7 mm Size 3.0" (Approx. 75.2 mm) Effective pixels Approx. 20.3 mega-pixels Resolution HVGA (320X480) 460.8 k dots Total pixels Approx. 21.6 mega-pixels Field of view Approx.
Appendix > Camera specifications Shutter Type Electronic front curtain shutter, Focal plane shutter Bracket shooting Speed • Auto: 1/4,000–1/4 sec. • Manual: 1/4,000–30 sec. (1/3 EV Step) • Bulb (time limit: 4 min.) Auto exposure bracketing (±3 EV), White Balance bracketing, Picture Wizard bracketing, Depth bracketing (Program and Aperture Priority mode only) Self-timer 2–30 sec.
Appendix > Camera specifications Dynamic Range • JPEG (3:2): 20.
Appendix > Camera specifications Size 1920X1080, 1280X720, 640X480, 320X240 (For Sharing) Frame rate 30 fps (NTSC), 25 fps (PAL) Multi Motion x0.
Appendix > Camera specifications Power Source Type Rechargeable battery: B740AE/B740AC/B740AU/ B740AK (2,330 mAh, 3.8 V) * The battery specifications or model may differ depending on your region. Dimensions (W X H X D) 117.4 mm X 65.9 mm X 39.0 mm Weight Approx 230 g (without battery and memory card) Operating Temperature 0–40 °C Operating Humidity 5–85 % Software i-Launcher, Samsung Raw Converter, Samsung DNG Converter * Specifications may change without notice to improve performance.
Appendix Glossary AP (Access Point) AEL (Auto Exposure Lock) An access point is a device that allows wireless devices to connect to a wired network. These features help you lock the exposure on which you want to calculate the exposure. Ad-Hoc network AF (Auto Focus) An ad-hoc network is a temporary connection for sharing files or an internet connection and between computers and devices. A system that automatically focuses the camera lens on the subject.
Appendix > Glossary Camera shake (Blur) Composition If the camera is moved while the shutter is open, the entire image may appear blurred. This occurs more often when the shutter speed is slow. Prevent camera shake by raising the sensitivity, using the flash, or using a faster shutter speed. Alternatively, use a tripod or the OIS function to stabilize the camera. Composition in photography means arranging objects in a photo. Usually, abiding by the rule of thirds leads to a good composition.
Appendix > Glossary EV (Exposure Value) Flash All the combinations of the camera’s shutter speed and lens aperture that result in the same exposure. A speed light that helps to create adequate exposure in low-light conditions. EV Compensation Focal length This feature allows you to quickly adjust the exposure value measured by the camera, in limited increments, to improve the exposure of your photos. The distance from the middle of the lens to its focal point (in millimeters).
Appendix > Glossary Image sensor Metering The physical part of a digital camera that contains a photosite for each pixel in the image. Each photosite records the brightness of the light that strikes it during an exposure. Common sensor types are CCD (Chargecoupled Device) and CMOS (Complementary Metal Oxide Semiconductor). The metering refers to the way in which the camera measures the quantity of light to set the exposure.
Appendix > Glossary Noise PAL (Phase Alternate Line) Misinterpreted pixels in a digital image that may appear as misplaced or random, bright pixels. Noise usually occurs when photos are shot with a high sensitivity or when a sensitivity is automatically set in a dark place. A video color encoding standard used in numerous countries throughout Africa, Asia, Europe, and the Middle East. NFC (Near Field Communication) NFC is a set of standards for radio communication at very close proximity.
Appendix > Glossary Shutter speed White Balance (Color balance) Shutter speed refers to the amount of time it takes to open and close the shutter, and it is an important factor in the brightness of a photo, as it controls the amount of light which passes through the aperture before it reaches the image sensor. A fast shutter speed allows less time to let light in and the photo becomes darker and more easily freezes subjects in motion.
Appendix Optional accessories You can purchase the following optional items: Lens, External flash, Rechargeable battery, Battery charger, Camera bag, Camera case, Memory card, Filter, USB cable, HDMI cable, Strap • To locate the type, image and availability of accessories, visit the Samsung website. • Before purchasing accessories, make sure they are compatible with your camera. GPS10 and EM10 are not compatible with this camera. • Use only Samsung-approved accessories.
Appendix Index A Aperture 15, 19 Auto Backup 128 Camera specifications 169 Charging 34 Color space 135 F Fader 100 Deleting 104 Photo type 69 Protecting 104 Video type 99 D Date & Time 141 Battery Caution 160 Charging 34 Insert 33 Beauty Face mode 63 Best Face mode 61 Bracketing 86 Depth of Field (DOF) 16, 21 Drive 84 F-number 15 Exposure Value (EV) 15, 96 Camera Connecting as removable disk 146 Connecting to PC 146 Disconnecting (Windows) 147 Layout 29 Bounce photography 26 Flash options 89 Gui
Appendix > Index N NFC (Tag & Go) 119 O Optical Image Stabilization (OIS) 83 Optional accessories Posture 13 Shooting modes Aperture Priority 56 Auto 52 Beauty Face 63 Manual 58 Recording 64 Shutter Priority 57 Smart 60 Power save mode 141 R Red-eye effect 90 Remote Viewfinder 126 Resolution Playback mode 111 Shooting mode (Movie) 98 Shooting mode (Photo) 68 Connect the flash 50 Flash layout 49 Shutter speed 17, 19 Slide show 106 Smart filter Playback mode 113 Shooting mode 95 Retouching faces 112
Please refer to the warranty that came with your product or visit our website www.samsung.com for after-sales service or inquiries.