Use and Care Guide
Read the user guide that came with your ADT Carbon Monoxide
Alarm to learn more about how the alarm responds to low or
moderate levels of carbon monoxide.
In the event of a water leak
If an ADT Water Leak Detector detects water, it will send a message
to the ADT Security Hub.
If your home is protected by an ADT professional monitoring
service, the ADT Security Hub will notify ADT and an operator will
respond according to the terms of your service.
Note: Unlike the other ADT detectors and alarms, the ADT Water Leak
Detector is unable to communicate with the ADT Security Hub during
a power or internet outage.
In the event of a critical carbon monoxide alert, you should
immediately open a window or door to get fresh air. Evacuate all
occupants from the premises and call 911 or the re department.
Remain at a safe distance and do not re-enter the premises until it
has been deemed safe by emergency ofcials.
Life Safety Protection
The ADT Security Hub uses different types of security codes:
Introduction
D
Security Codes
• Master user code
• User codes
To change the Master User Code:
You are provided with a single Master User Code for accessing
System Settings. The Master User Code is set by default to 1111
but should be changed after setup.
Master user code
1.
2.
Select System Settings from the Home screen.
Enter the Master User Code.