Use and Care Guide

B
Intrusion Detection
Intrusion detection is provided by devices such as the ADT Door
and Window Detector or the ADT Motion Detector. These devices
are only active when armed by your ADT Security Hub.
If your home is protected by an ADT professional monitoring
service, the ADT Security Hub will activate the alarm siren and
notify ADT as soon as an intrusion is detected and initiate an
emergency response.
If your home is not protected by an ADT professional monitoring
service, the ADT Security Hub will activate the alarm siren as soon
as an intrusion is detected but will not notify ADT.
Visit SmartThings.com/ADT for more details on ADT professional
monitoring services and to see the full list of compatible detectors
and alarms.
Introduction
It is strongly recommended that you perform a weekly test of your
ADT Security Hub, detectors, and alarms:
Local walk test
Select System Settings from the Home screen.
Enter the Master User Code.
Select Walk Test.
Select Sensors Test and follow the on-screen instructions.
Select Console Test and follow the on-screen instructions.
1.
2.
3.
4.
5.
Tap or the Home button to exit Test Mode.6.
ADT Security Hub
• If a detector fails the Sensors Test, check that it’s
been installed correctly or visit SmartThings.com/
Support-ADT for assistance.