Use and Care Guide

You can close the open doors or windows to remove the
warnings, or you can bypass these sensors by pressing the
Bypass All button and entering your user code.
Bypassed sensors do not protect doors or windows, and will
not activate the alarm siren, notify ADT, or send an alert to your
smartphone in the event of an intrusion. Bypassed sensors revert
to normal operation when the alarm system is next armed.
If the system is armed in Away Mode, it must be disarmed within
30 seconds of entering the house through a protected door or area.
Disarming the system
Press the Disarm button and enter your user code to disarm the
system.
If the system is armed in Stay mode, it must be disarmed before
leaving the house through a protected door.
Intrusion DetectionIntrusion Detection
Disarm Button