I I •
Meet the Outlet The Outlet lets you control, automate, and monitor lamps, electronics, and small appliances from anywhere. Trigger lamps to automatically turn on when you come home; save energy by restricting power to appliances; and turn any three-prong plug into a smart, controllable device.
How to connect an Outlet Select "Connect New Device" in the free SmartThings mobile app and then plug in the Outlet. ~~ =-----=-- = ~-------- 'ti" -- - - - - - - -- --' II ~ ~ I m I. ~-: : - --- ----- --- - -- ------.... .,. '< / .\.. Installation Tips: The Outlet works best if it's within 15 feet (4.5 meters) of the SmartThings Hub when you connect it.
If your device doesn't connect If your device doesn't connect after plugging it in, remove the Outlet from the wall receptacle. Press and hold the device's Connect button while plugging the Outlet back into the wall. Once the LED is ON, release the button and follow the "Connect New Device" steps in the SmartThings app. ----- ---y:' ------- ~ ...
CAUTION: TO BE INSTALLED AND/OR USED IN A_ ACCORDANCE WITH APPROPRIATE ELECTRICAL CODES ~ AND REGULATIONS. IF YOU ARE UNSURE ABOUT ANY OF THESE INSTRUCTIONS, CONSULT A QUALIFIED ELECTRICIAN. UNPLUG UNIT WHEN SERVICING CONNECTED APPLIANCES. SAVE THIS INSTRUCTION SHEET. IT CONTAINS IMPORTANT TECHNICAL DATA ALONG WITH TESTING AND TROUBLESHOOTING INFORMATION WHICH WILL BE USEFUL AFTER INSTALLATION IS COMPLETE. ATTENTION: INSTALLEZ ET UTILISEZ CONFORMEMENT AUX NORMES ELECTRIQUES REGULATOIRES.
WARNING: Each module outlet is rated to 12A only if the connecting cord is rated at gooc or greater. The total current limit of the device is 12A. Do not exceed ~ this value. If a direct short is created on the output, the ~ Appliance Module will be damaged and will no longer function. If a load greater than 12A is attached to the output, the Appliance Module will be damaged and will no longer function. M \lb a AVERTISSEMENT: Chaque sortie du module est evalue 12A seulement si le cordon de raccordement
Information to the User Changes or modifications not expressly approved by SmartThings, Inc. could void your authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1 This device may not cause harmful interference and 2 This device must accept any interference received, including interference that may cause undesired operation.
One (1) Year Limited Warranty SmartThings, Inc. warrants this product (the "Product") against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser ("Warranty Period").
EXCEPT FOR BODILY INJURY, SMARTTHINGS SHALL NOT BE LIABLE FOR (I) ANY LOST PROFITS, COST OF PROCUREMENT OF SUBSTITUTE PRODUCTS, OR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR (II) ANY AMOUNTS IN EXCESS OF THE PURCHASE PRICE FOR THE PRODUCT, IN EACH CASE WHETHER RESULTING FROM THE USE OF OR INABILITY TO USE THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, EVEN IF COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.