SmartThings Hub A safer, smarter home starts with me! Quick-Start Guide
One App + One Hub + All Your Things Creating a safer, smarter home has never been easier. Start with the SmartThings app and Hub, add your favorite products, and control them from another room or another country. App Hub Things The free SmartThings app lets you get important notifications about what’s happening, control things in every room, and run your home from your phone.
Meet Your SmartThings Hub SmartThings lets you easily control, monitor, and secure your home from anywhere in the world. At the center of it all is the SmartThings Hub.
The Brain of Your Smart Home Like a live-in translator, the Hub wirelessly connects all of the different sensors around your home so that they can send important information to your smartphone, and to each other. The SmartThings Hub connects to your Internet router via the included Ethernet cable. The Hub has a ZigBee, Z-Wave, and Bluetooth radio, and also supports IP-accessible devices–providing customers with the widest range of supported devices of any smart home platform.
So Easy Anyone Can Do It As with all SmartThings devices, the Hub requires no wiring or messy installation–just a simple setup that anyone can do. Simply plug in the included Ethernet cable from your Hub to your Internet router, attach the power cord to the wall, and then use the free SmartThings app to start connecting your devices. Easy peasy.
Simple Setup The SmartThings Hub works best if installed in a central location to where your SmartThings will be connected. The recommended separation distance from the user for this equipment is 7.6 inches (20 cm). • Connect your SmartThings Hub to your Internet router using the included Ethernet cable. • Plug in the power adapter to an outlet and attach the power connector to the back of the Hub. • Continue setting up your Hub by going to www.SmartThings.
Battery Backup Installation Disconnect the network cable and power adapter or any other connected peripherals before installing batteries (4 x AA): • Slide bottom cover off. • Insert 4 AA batteries. • Slide bottom cover on till it snaps in to place. NOTE: Hub does not recharge batteries.
Safety Instructions Disconnect the network cable and power adapter or any other connected peripherals if any of the following conditions exist: • The power cord or connector is damaged or frayed. • You want to clean the Hub (see Important Safety Instructions). • The Hub or attached cables are exposed to rain, water/fluids, or excessive moisture. • The Hub power adapter is damaged or has been dropped and you suspect it needs to be serviced.
Correct disposal of batteries in this product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste.
Certifications Hereby, SmartThings Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The original Declaration of Conformity may be found at smartthings.com/eu/compliance. Certified under FCC Part 15. Certified in Canada by IC to RSS-210. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
One (1) Year Limited Warranty SmartThings, Inc. warrants this product (the “Product”) against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).