Meet your Multipurpose Sensor The most versatile device in the Sam sung SmartThings TM family, the Multipurpose Sensor acts as an open/closed, vibration, orientation, and temperature sensor all in one.
Multipurpose Sensor components Multipurpose Sensor Magnet Wall Plate
How to connect a Multipurpose Sensor Select "Connect New Device" in the free SmartThings mobile app and then remove the "Remove to Pair" tab found in the Multipurpose Sensor. Installation Tips The Multipurpose Sensor works best if it's within 15 feet (4.5 meters) of the SmartThings Hub when you connect it.
If your device doesn't connect: If your device doesn't connect after removing the Remove to Pair 11 tab, hold the "Connect" button while inserting the battery. Release the button when the LED is lit. The LED will blink blue while attempting to connect. Then select "Connect New Device" in the SmartThings app.
Replacing the battery To replace the battery in your Multipurpose Sensor, use a flat tool to carefully remove the battery from the device. Then add a new battery and close the cover back into place. \ \ USE CARE when replacing the battery to avoid damaging the device.
Safety Instructions • Read, keep and follow these instructions • Heed all warnings • Do not use this product near water or expose the product to dripping or splashing of any water or liquid. • Clean only with a dry cloth • Do not install near any heat sources such as radiators , heat registers, stoves or other apparatus (including amplifiers) that produce heat • Only use attachments and accessories specified by the manufacturer • Read our Product Usage Guidelines at: http://SmartThings.
Correct disposal of batteries in this product (Waste Electrical & Electronic Equipment) :a - (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste.
Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d 1ndustrie Canada applicables aux appareils radio exempts de licence.
One (1) Year Limited Warranty SmartThings, Inc. warrants this product (the "Product") against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser ("Warranty Period").
EXCEPT FOR BODILY INJURY, SMARTTHINGS SHALL NOT BE LIABLE FOR (I) ANY LOST PROFITS, COST OF PROCUREMENT OF SUBSTITUTE PRODUCTS, OR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR (II) ANY AMOUNTS IN EXCESS OF THE PURCHASE PRICE FOR THE PRODUCT, IN EACH CASE WHETHER RESULTING FROM THE USE OF OR INABILITY TO USE THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, EVEN IF COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.