Quick-Start Guide Multipurpose Sensor
Meet your Multipurpose Sensor The most versatile device in the Samsung SmartThings™ family, the Multipurpose Sensor acts as an open/closed, vibration, orientation, and temperature sensor all in one.
How to connect a Multipurpose Sensor REMOV E TO PAIR Select “Connect New Device” in the free SmartThings mobile app and then remove the “Remove to Pair” tab found in the Multipurpose Sensor. Installation Tips The Multipurpose Sensor works best if it’s within 15 feet (4.5 meters) of the SmartThings Hub when you connect it.
Multipurpose Sensor components Magnet Alignment Mark Magnet Multipurpose Sensor Wall Plate
If your device doesn’t connect If your device doesn’t connect after removing the "Remove to Pair" tab, hold the “Connect” button while inserting the battery. Release the button when the LED is lit. The LED will blink blue while attempting to connect. Then select “Connect New Device” in the SmartThings app.
Use your Multipurpose Sensor to know if doors are open or closed The SmartThings Multi Sensor can monitor whether doors, windows, cabinets or your garage are open, closed or have been left open after you leave home. To start, mount one part of your Multipurpose Sensor on a doorframe, window frame, or the fixed part of a cabinet or drawer, and place the other part next to it on the door, window, or part that opens.
Use your Multipurpose Sensor to monitor temperature The Multipurpose Sensor can detect the temperature in the room where it's located. By placing the Multipurpose Sensor on a door, window, or cabinet, you can monitor the temperature and receive alerts if the room gets too hot or cold.
Replacing the battery To replace the battery in your Multipurpose Sensor, use a flat tool to carefully remove the battery from the device. Then add a new battery and close the cover back into place. USE CARE when replacing the battery to avoid damaging the device.
Safety Instructions • Read, keep and follow these instructions • Heed all warnings • Do not use this product near water or expose the product to dripping or splashing of any water or liquid • Clean only with a dry cloth • Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat •Only use attachments and accessories specified by the manufacturer • Read our Product Usage Guidelines at: http://SmartThings.
Correct disposal of batteries in this product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste.
Certifications Hereby, SmartThings Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The original Declaration of Conformity may be found at smartthings.com/eu/compliance. Certified under FCC Part 15 Certified in Canada by IC to RSS-210 This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
One (1) Year Limited Warranty SmartThings, Inc. warrants this product (the “Product”) against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
Template for wall mounting: Magnet MAX 0.
