User Manual

Overview of the control panel
F815J/F813J
1. Detergent dispenser
2. Display panel
Displays the remaining wash cycle time and error messages.
3. Baby program button
Press the button to select one of the three available Baby
programs.
Cotton(Underwear)
→ Coloureds → Delicates → Towel
4. Option button
Press the button repeatedly to cycle through the available partial
wash options
{ Rinse
+
→ Prewash → (Rinse
+
+ Prewash) → Cancel → Rinse
+
}.
Note : Prewash is available only with Baby program(Cotton,
Coloureds, Delicates, Towel), Cotton, Coloureds, Synthetics
or Delicate programs.
5. Spin selection button
Press the button repeatedly to cycle through the available spin
speed options.
When pressing this button during operation, you can see the
selected spin speed in the display panel.
6. Temperature selection button
Press the button repeatedly to cycle through the available water
temperature options (cold water, 30˚C, 40˚C , 60˚C and 95˚C).
When pressing this button during washing, you can see the
selected temperature in the display panel.
7. Delay (Start) button
Press the button repeatedly to cycle through the available delayed
start options (from 1 hour to 24 hours in one hour increments).
8. Door (Open) button (F815J)
Press to open the washing machine door.
Note: You cannot open the door until you press (On/Off).
9. Fuzzy Control dial
Turn the dial to select one of the nine available wash programs.
10. Start/Pause button
Press to pause and restart programs.
11. (On/Off) button
Press once to turn the washing machine on, press again to turn the
washing machine off. If the washing machine power is left on for
longer than 10 minutes without any buttons being touched, the
power automatically turns off.
Washing a Load of Laundry
7
F815J/F813J no, rh, 4, 6, 8 (x 100 rpm)
no:no spin, rh:rinse hold
Cotton, Coloureds, Synthetics, Delicates, Wool, Quick,
Rinse+Spin, Spin, Drain