User Manual (ver.1.0)

ManualsBrandsSamsung ManualsPlasma TVFP-T5894W

English - 36

Changing the Position of the PIP Window

4 Press the ▲ or ▼ button to select Position, then press the ENTER button.

Press the ▲ or ▼ button to select the desired PIP window position, then press

the ENTER button.

➢

In Double Window (

) and Double Wide ( ) modes, Position cannot

be selected.

➢

If the PIP window is set to Double Window (

) or Double Wide ( )

mode, the screen size or alignment may slightly differ depending on the

signal type.

Changing the PIP Channel

5 Press the ▲ or ▼ button to select Channel, then press the ENTER button.

Press the ▲ or ▼ button at the bottom of the remote to select the desired

channel in the PIP window, then press the

ENTER button.

➢

MAIN: HDMI 1,2,3 / Component 1,2

PIP: TV(Analog)

Press the

EXIT button to exit.

Press the PIP CH and CH buttons on the remote control to change the PIP

channel.

Freezing the Current Picture

1 Press the STILL button to freeze a moving picture.

➢

Normal sound will still be heard. Press again to cancel.

➢

To prevent screen burn-in, this function will automatically cancel after 5

minutes.

➢

While V-Chip is in operation, the Still function cannot be used.

RETURN

FAV.CH AUTO PROG. ADD/DEL

PIP : On

Size :

Position :

Channel : Air 10

PIPT V

Enter

Move

Return