User manual

setting up _17setting up _17
01 SETTING UP
setting up your refrigerator
REASSEMBLING THE FRIDGE DOOR
 Insert and tighten the
screw into the left and
right middle hinges with a
philips screwdriver(+).
 Insert and tighten the 2 hex
head bolts into the left and
right middle hinges with an
allen wrench(Ø5mm).
 Replace the middle hinge
cap.
 Place the hole in the
bottom of the left door
over the middle hinge.
 Insert the left upper hinge
shaft into the hole on the
corner of the fridge door.
 Insert the upper hinges
into the holes at the top of
the door.
Insert and tighten the 3
hex head bolts into the left
and right upper hinges with
a socket wrench(10mm).
 Insert and tighten the
ground screw into the left
and right upper hinges with
a philips screwdriver(+).
 Connect the electronic
wire on the top of the
refrigerator.
 Position the top table in
place. Insert and tighten
the 3 screws into the
top table with a philips
screwdriver(+).
DA68-01868A-02.indd 17 2010.10.7 2:30:48 PM