User manual

18_ setting up18_ setting up
REASSEMBLING THE FREEZER DOOR (DRAWER TYPE)
 Pull out the rails to the full
length on each sidle of the
cabinet evenly.
 Hang the freezer door
front onto open slot on the
sides.
 With the 10mm wrench,
reattach 4 bolts to connect
the rail with the door.
 Replace the drawer box.
REASSEMBLING THE FREEZER DOOR (SWING TYPE)
 Place the hole in the
bottom of the freezer door
over the right side low
hinge.
 Replace the middle hinge connected to the freezer.
 Insert and tighten the screw into the left and right middle
hinges with a philips screwdriver(+). Insert and tighten the 2
hex head bolts into the left and right middle hinges with an
allen wrench(Ø5mm).
 Replace the cap on the middle hinge.
Slot
DA68-01868A-02.indd 18 2010.10.7 2:30:51 PM