User manual
setting up _19setting up _19
01 SETTING UP
setting up your refrigerator
HOW TO REVERSE THE DOOR (OPTION)
Unplug the refrigerator or disconnect the power.
Remove 3 screws on the
hinge cover.
Disassemble the hinge
cover.
Disassemble 2 connectors.
(a housing and a reed
switch)
Disassemble ground wire
by removing 1 screw on
each side.
Disassemble the upper
hinge by removing 3 bolts
on each side with the
10mm wrench.
1. Avoid the wire damage.
2. Fridge door is possible to tip
over at this time.
Remove each fridge doors
by lifting it up.
1. Possible to drop or scratch the
door at this time.
2. Middle hinge cap may come
off with the door.
Disassemble middle hinge
cap.
Remove 1 screw and 2
bolts of each side (use
Ø5mm allen wrench).
1. At first, Remove left side
middle hinge and right side.
2. Be careful not to drop the
freezer door.
Remove the freezer door
by lifting it up.
1. Possible to drop or scratch the
door at this time.
2. Low hinge cap may come off
with the door.
Remove 2 screws.
Separate front leg Cover.
Cap
Cover
DA68-01868A-02.indd 19 2010.10.7 2:30:53 PM