User manual

20_ setting up20_ setting up
Separate the Cap of the
front leg Cover. (pull out
inside of Cap)
Insert the Cap on the other
side of the front leg Cover.
Remove 2 bolts of each
hinge with the 10mm
wrench.
Place them in front of each
side.
Separate low hinge shaft
by using 5/32” wrench and
disassemble low hinge leg
by turning it colockwise,
and then assemble the low
hinge by turning it over.
Reattach the former right
hinge on the left side and
the former left hinge on the
right side by using 2bolts.
Separate stopper by
removing 1 screw on the
right lower side of freezer
and assemble the stopper
on the left side by reversing
it.
The middle hinge for
reversing a door can be
found in the fridge.
Change the middle hinges
assembled at refrigerator
to the middle hinges in the
fridge with handles.
Use the black hinge
cap of the middle hinge
assembled at refrigerator.
Then place it at the bottom
of the left middle hinge
supplied separately.
Use the Flat-blade screwdriver(-).
Cap
DA68-01868A-02.indd 20 2010.10.7 2:30:57 PM