User manual

setting up _21setting up _21
01 SETTING UP
setting up your refrigerator
Place the hole in the
bottom of the freezer door
over the low hinge.
Replace the middle hinge connected to the freezer.
Insert and tighten the screw into the left and right middle
hinges with a philips screwdriver(+). Insert and tighten the 2
hex head bolts into the left and right middle hinges with an
allen wrench(Ø5mm).
Replace the cap on the middle hinge.
Place the hole in the
bottom of the left door
over the middle hinge.
Insert the left upper hinge
shaft into the hole on the
corner of the fridge door.
Insert the upper hinges
into the holes at the top of
the door.
Insert and tighten the 3
hex head bolts into the left
and right upper hinges with
a socket wrench(10mm).
Insert and tighten the
ground screw into the left
and right upper hinges with
a philips screwdriver(+).
Connect the electronic
wire on the top of the
refrigerator.
Position the top table in
place. Insert and tighten
the 3 screws into the
top table with a philips
screwdriver(+).
DA68-01868A-02.indd 21 2010.10.7 2:30:59 PM