User manual

22_ setting up22_ setting up
INSTALLATION OF THE HANDLES

 Make sure the word “UP” on the rear of the handle is facing right side up.
 a. Match the upper and lower handle Locking Tabs on the doors to the handles.
 b. Fix the handles to the doors by sliding them down firmly until you hear a click sound.
 Check the installation of the handles by pulling on them. If the handles have been inserted correctly,
they should not move. Ensure the two handles are horizontally aligned.
 If the REF handles are not aligned, repeat number 2. To align the doos, refer to the owner’s manual,
section ‘Leveling the refrigerator’

 Make sure the word “The Upper Direction” on the side of the handle if facing up.
 a. Align the handle with the mounting studs.
 b. Push the handle onto the mounting studs until you hear a click.
 Check the installation of the handle by pulling on it. If the handle has been inserted correctly, it
should not move.
 If the Freezer handle is not attached, repeat step 2.
 Swing-Type Model does not include FRE handle.
DA68-01868A-02.indd 22 2010.10.7 2:31:2 PM