User's Manual

Changing Your Settings 235
Wi-Fi Direct Setup and Settings
You can configure your device to connect directly with other
Wi-Fi capable devices. This is an easy way to transfer data
between devices. These devices must be enabled for Wi-Fi
direct communication. This connection is direct and not via a
HotSpot or WAP.
Displays when Wi-Fi Direct is active and
communicating.
Note: Activating this feature will disconnect your current Wi-Fi
network connection.
To activate your connection:
1. From the main Settings page, tap Connections tab.
2. In a single motion touch and slide the
Wi-Fi slider to the
right to turn it on. The slider color indicates the
activation status.
3. Tap
Wi-Fi Direct .
4. Tap
Scan and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Tap
Multi-connect ➔ Scan and select all the device
names to begin the connection process to these Wi-Fi
Direct compatible devices.
Note: The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.