User's Manual

Assemble Your DeviceGetting Started

Install a Memory Card

You can install an optional microSD or microSDHC

memory card (not included) to expand available

memory space.

Note: A memory card can be installed at any time; it

is not necessary to install it prior to using the device.

For more information on installing a memory card,

see Install a Memory Card.

Install the Battery

1. Insert the battery into the opening on the back of

the phone, making sure the connectors align.

2. Gently press down to secure the battery.

Replace the Back Cover

1. Place the battery cover onto the back of the

phone and press down.

2. Press along the edge of the back cover until you

have a secure seal.

Charge the Battery

Your device is powered by a rechargeable, standard

Li-Ion battery. A Wall/USB Charger (charging head

and USB cable) is included with the device for

charging the battery from any standard outlet.

The battery comes partially charged. You can use

the device while charging.

Note: For fastest charging times, use the Adaptive

Fast Charging charger that comes with your phone.

This charger provides faster charging only when

connected to devices that support Adaptive Fast

Charging.

1. Insert the USB cable into the port.

2. Connect the USB cable to the charging head,

and then plug the charging head into a standard

outlet.

3. When charging is complete, unplug the charging

head from the outlet and remove the USB cable

from the device.

Caution: Failure to unplug the wall charger before you

remove the battery, can cause damage to the device.