User's Manual

18
13. Accept the current device name.
– or –
Tap the
Device name field and use the on-screen
keyboard to rename your device.
Important! The device name is also used to provide an
identification for your device’s Bluetooth and Wi-Fi
Direct names.
14. Tap
Finish to complete the setup process.
15. Read the on-screen Collect diagnostics information.
Note: This software collects only diagnostic data from your
device so that technicians can better troubleshoot
issues with your device.
16. Select either
More Info... (to read additional
information) or
Close to close the message screen.
Important! Selecting Close only closes the current description
screen and does not disable data collection.
To disable data collection, go to
Settings ➔
Accounts tab ➔ Backup and reset ➔ Collect
diagnostics
and turn off the Allow Diagnostics
feature. For more information, refer to “Collect
Diagnostics” on page 324.
Switching the Device On or Off
Once the device has been configured, you will not be
prompted with setup screens again.
To turn the device on:
 Press and hold ( Power/End ) until the device
switches on.
The device searches for your network and after finding
it, you can make or receive calls.
Note: The display language is preset to English at the factory.
To change the language, use the Language menu. For
more information, refer to “Language and Input
Settings” on page 305.