User's Manual

Connections 261
9. Confirm the Mobile HotSpot active icon appears
at the top of the screen.
Note: By default, prior to the initial setup process, the
connection is unsecure. It is recommended you create
your own password prior to your initial connection.
Note: The 4G Mobile Hotspot drains your device’s battery at a
much faster rate than when using any other feature
combination. The best way to keep using the device as a
Hotspot is to have it connected to a power supply.
To connect to the 4G Hotspot:
1. Enable Wi-Fi (wireless) functionality on your target
device (laptop, media device, etc.).
2. Scan for Wi-Fi networks from the external device and
select your device’s Mobile HotSpot name from the
network list.
• The SSID name for your device’s hotspot is determined by what
you entered into the
Network SSID field.
• You can change the name by tapping Configure ➔ Network
SSID
and changing the entry.
3. Select this HotSpot and follow your on-screen
instructions to complete the connection.
4. Launch your Web browser to confirm you have an
Internet connection.
To change the 4G Hotspot password:
1. From the main Settings page, tap Connections tab ➔
More networks ➔ Tethering and portable hotspot .
2. Tap the
4G Mobile Hotspot field and then select
Configure.
3. Tap the
Security field and select WPA2 PSK .
4. With security enabled, delete the previous password
and enter a new one into the
Password field.
Important! The more complex the password, the harder it will
be for intruders to break your security. It is
recommended that you not use names, birthdays,
or other personal information.
5. Tap
Save to store the new settings.