User's Manual

312
Motions and Gestures Settings
This feature allows you to assign specific functions to certain
phone actions that are detected by both the accelerometer
and gyroscope.
Caution! Excessive shaking or impact to the device may cause
unintended results. To learn how to properly control
motions, tap (
Apps ) ➔ Settings ➔ My device tab
➔
Motions and gestures . When tapped, each entry
comes with an on-screen tutorial.
• Air gesture : Allows you to control your device by performing
motions above the sensor (without touching the device).
•Motion : Allows you to control your device using natural
movements (on the screen).
• Palm motion : Allows you to control your device by touching the
screen with your entire hand.
• Gyroscope calibration : Allows you to properly calibrate your
device’s touch screen.
To activate Air gesture:
1. From the main Settings page, tap My device tab ➔
Motions and gestures .
2. In a single motion touch and slide the
Air gesture slider
to the right to turn it on.
3. Read the on-screen notification and tap
OK .
Note: At least one feature must be activated before Air gesture
can be activated.
4. Tap
Learn about sensor and icon field to review
on-screen information about the Air gestures sensor
and related icon.
5. In a single motion, slide a feature’s activation slider to
the on position.
The following is a description some of the most commonly
used gestures:
• Quick glance : Once enabled, you can move your hand over the
air gesture sensor (located above the on-screen clock at the
upper-right) to temporarily activate preview window that can be
used to display selected user-enabled information such as:
Time & Date, Notification icons, Missed calls, etc..